Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

8-640905-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

8-640905-1
Description

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 2.62 mm2; Terminal Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

0462-201-16141

TE Connectivity

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

Details

SS14

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

ULN2803A

Vishay Intertechnology

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

Details

LL4148

Micronas Semiconductor Holding Ag

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

Details

LM358M

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N7002-T1-E3

Vishay Intertechnology

Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.

Details

1N4148WS

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317LMX/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;

Details

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

TE Connectivity

TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.

Details

M39029/58-360

Tri-star Electronics International

CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;

Details

1N4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

8-640905-1 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	2.62 mm²
Terminal Gender:	Female
Voltage (Rated):	300 V
Terminal & Terminal Block Type:	Push-On Terminal
Safety Approval:	UL
Wire Gauge:	14 AWG

Category Top Products

640903-1

Tyco Electronics Amp

PUSH-ON TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; Safety Approval: UL;

320569

TE Connectivity

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 6.64 mm2;

36.06

Altech

The Altech 36.06 is a BARRIER STRIP TERMINAL BLOCK with BOARD mounting, rated for 300V voltage and 15A current. It has CSA, IEC, UL, VDE safety approvals and accommodates wire gauge up to 10 AWG. Ideal for applications requiring secure connections in industrial settings with multiple ways available for wiring configurations.

MSTBVA2,5/6-G-5,08

Phoenix Contact

Phoenix Contact's MSTBVA2,5/6-G-5,08 is a 1-row strip terminal block with 6 ways and rated for 12A current at 320V. It accepts wire gauge up to 13 AWG with wire cross section of 2.5mm², suitable for board mounting applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

320568

TE Connectivity

TE Connectivity 320568 is a UL-approved RING TERMINAL with a wire gauge of 10 AWG and rated voltage of 300 V. It is suitable for use in terminals & terminal blocks, offering a wire cross section of 6 mm2 and one-way connection.

2-36160-1

TE Connectivity

RING TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; Safety Approval: UL; No. of Ways: 1;

DRA1-MP240D3

Sensata Technologies

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SCREW; Voltage (Rated): 280 V; Current (Rated): 3 A; No. of Decks: 1;

282834-4

TE Connectivity

TE Connectivity 282834-4 is a modular terminal block with 4 ways, rated for 10A current and 150V voltage. It uses screw fastening method and supports wire gauge up to 16 AWG. Ideal for board mounting applications with UL safety approval.

2-796634-2

Tyco Electronics Amp

STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: STANDARDS: IEC 998-1/998-2-1, PA 6-6, 94V-0, POLARIZED; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

1757035

Phoenix Contact

Phoenix Contact 1757035 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 12A current and 320V voltage. It accepts wire gauge up to 12 AWG with wire cross section of 2.5 mm2, mounted on board using screws. Safety approved by CB, CSA, CUL, EAC, UL, VDE for various industrial applications.

19002-0004

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Wire Cross Section: .8 mm2; Terminal Gender: FEMALE;

MS-25036-154

Abb Installation Products

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;

D-436-38-COLD

TE Connectivity

BUTT TERMINAL; Mounting Type: CABLE; Wire Gauge: 12 AWG; Safety Approval: UL; Wire Cross Section: 2.94 mm2;

7690

Keystone Electronics

POWER TERMINAL; Additional Features: MATERIAL: BRASS;

12015870

Aptiv

PUSH-ON TERMINAL; Wire Cross Section: 2 mm2; Terminal Gender: FEMALE;

1-796634-2

Tyco Electronics Amp

STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: STANDARDS: IEC 998-1/998-2-1, PA 6-6, 94V-0, POLARIZED; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

LCAS4-14F-L

Panduit

LUG TERMINAL; Wire Gauge: 4 AWG;

1778573

Phoenix Contact

STRIP TERMINAL BLOCK;

3044092

Phoenix Contact

Phoenix Contact 3044092 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 2 ways. It supports wire gauge up to 12 AWG and wire cross section of 4 mm². Safety approved by CB, CSA, CUL, GOST, UL, VDE for various industrial applications.

DRA1-MP240D3

Crydom

The Crydom DRA1-MP240D3 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with CE, CSA, UL, VDE safety approvals. It has a rated voltage of 280V and current of 3A, fastened by SCREW method. Ideal for industrial applications requiring secure electrical connections.