Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

282834-6

Manufacturer

TE Connectivity
Manufacturer's Part Number

282834-6
Description

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; Wire Cross Section: 1.3 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Itt Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;

Details

EU2B-YS3303C

Idec

ROTARY SWITCH;

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Micro Commercial Components

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

Details

1N4148

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Micronas Semiconductor Holding Ag

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

DS18B20Z+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

LM358AN

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

MBRS130LT3G

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Analog Devices

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

282834-6 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Total Ways:	6
Wire Cross Section:	1.3 mm²
Product Type:	Modular Terminal Block
Safety Compliance:	UL
Total Rows:	1
Fastening Style:	Screw
Rated Current:	10 A
Wire Gauge:	16 AWG
Total Decks:	1
Rated Voltage:	150 V

Category Top Products

MS25036-157

TE Connectivity

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 6.64 mm2; No. of Ways: 1;

1287

Keystone Electronics

TAB TERMINAL; Terminal Gender: MALE;

2-34173-1

TE Connectivity

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; No. of Ways: 1; Wire Cross Section: 6 mm2; Safety Approval: UL;

MS25036-112

TE Connectivity

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Wire Cross Section: 6.64 mm2; No. of Ways: 1;

AMP-0-0640903-1

TE Connectivity

TE Connectivity's AMP-0-0640903-1 is a FEMALE PUSH-ON TERMINAL with UL approval, rated for 300V voltage and 18 AWG wire gauge. Ideal for 0.96 mm2 wire cross sections, it excels in various applications requiring reliable electrical connections.

MS25036-103

TE Connectivity

TE Connectivity's MS25036-103 is a UL-approved ring terminal with a wire gauge of 16 AWG and a rated voltage of 300V. It is suitable for applications requiring a single-way connection, with a wire cross section of 1.65 mm2.

52044-2

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 2 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 35 mm2; Terminal Gender: FEMALE;

3967

Multicomp Pro

RING TERMINAL; Wire Gauge: 10 AWG;

1751264

Phoenix Contact

The Phoenix Contact 1751264 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 13.5A current and 200V voltage. It has CB, CCA, CSA safety approvals and uses SCREW fastening method. Ideal for BOARD mounting applications with wire gauge up to 16 AWG and wire cross section of 1.5 mm2.

MS25036-101

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;

3209578

Phoenix Contact

Phoenix Contact 3209578 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL & CSA approval. It supports 12 AWG wire, 800V voltage, and 4mm2 wire cross section. Ideal for applications requiring fast PUSH-IN installation with a rated current of 24A in up to 4 ways.

1-963748-1

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Wire Cross Section: 1 mm2;

3-520106-2

TE Connectivity

TE Connectivity 3-520106-2 TAB TERMINAL is a UL approved male terminal block for 14 AWG wire with 600V rating. Ideal for applications requiring secure connections with 2.08 mm² wire cross section.

MS-25036-154

Abb Installation Products

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;

63824-1

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

1803293

Phoenix Contact

Phoenix Contact 1803293 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 8A current and 160V voltage. It is mounted on a board using a connector fastening method. This terminal block has safety approvals from CB, CCA, CSA, CUL, EAC, and UL making it suitable for various industrial applications.

2-36152-1

TE Connectivity

TE Connectivity's 2-36152-1 is a UL-approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.65 mm2, this FEMALE terminal block is ideal for various electrical applications requiring secure connections.

1945096

Phoenix Contact

The Phoenix Contact 1945096 is a STRIP TERMINAL BLOCK with 2 ways, rated for 250V and 8A. It is mounted on BOARD using CONNECTOR fastening method. This terminal block has safety approvals from CUL, EAC, and UL, making it ideal for various industrial applications requiring secure electrical connections.

9-160463-2

Tyco Electronics Amp

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.5 mm2; Safety Approval: UL; Terminal Gender: FEMALE;

MC1,5/2-G-3,81

Phoenix Contact

The Phoenix Contact MC1,5/2-G-3,81 is a barrier strip terminal block with 160V rated voltage and 8A rated current. It has CB, CSA, CUL, GOST, UL, VDE safety approvals and mounts on boards using connectors. Ideal for applications requiring secure electrical connections in limited space.