Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

63824-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

63824-1
Description

TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

PIC18F4550T-I/PT

Microchip Technology

The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.

Details

LM358MX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

RC0402FR-071KL

Yageo

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

Details

AT90CAN128-16AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

2N2222A

Baneasa S A

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

Details

SS14

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

2N2222A

Semiconductor Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

1N4148

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

63824-1 Technical Details

TYPE	DESCRIPTION
Terminal Gender:	Male
Product Type:	Tab Terminal
Safety Compliance:	UL

Category Top Products

MCV1,5/4-G-3,5

Phoenix Contact

The Phoenix Contact MCV1,5/4-G-3,5 is a 4-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It supports wire gauge up to 15 AWG and wire cross-section of 1.5mm2, making it ideal for board mounting applications requiring secure connections. Safety approvals include CB, CSA, CUL, EAC, UL, and VDE.

1-320551-1

TE Connectivity

TE Connectivity 1-320551-1 is a UL-approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for applications requiring secure electrical connections in terminals & terminal blocks.

2002-1401

Wago

The Wago 2002-1401 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 12 AWG wire gauge, rated for 800V and 32A current. Featuring a spring-loaded fastening method, it supports up to 4mm2 wire cross-section. Ideal for industrial applications requiring secure electrical connections in limited space.

848

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

1776508

Phoenix Contact

Phoenix Contact 1776508 is a STRIP TERMINAL BLOCK with 2.5 mm2 Wire Cross Section and 13 AWG Wire Gauge. Rated for 320V voltage and 12A current, it's ideal for BOARD mounting applications requiring CB, CCA, CSA, CUL, EAC, GL, RS safety approvals.

51864-1

TE Connectivity

TE Connectivity's 51864-1 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Its wire cross section is 2.08 mm2, making it ideal for various electrical applications requiring secure connections and reliable performance.

DNF18250FIBX-2K

Panduit

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE;

1-726388-2

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

1196

Zierick Manufacturing

WIRE TERMINAL; Manufacturer Series: 1196;

280-562/281-411

Wago

MODULAR TERMINAL BLOCK;

4-520447-2

TE Connectivity

TE Connectivity's 4-520447-2 is a UL-approved PUSH-ON TERMINAL for 10 AWG wire at 600V. With a wire cross section of 5.26 mm2, this FEMALE terminal block is ideal for various electrical applications.

MS25036-116

TE Connectivity

RING TERMINAL; Wire Gauge: 8 AWG; Wire Cross Section: 10.5 mm2; Safety Approval: UL; No. of Ways: 1;

TB300-03

Eaton Corporation

Eaton Corporation's TB300-03 is a 2-row BARRIER STRIP TERMINAL BLOCK with 6 ways, rated for 30A current and 600V voltage. It uses SCREW fastening method and supports wire gauge up to 6 AWG. Ideal for CABLE mounting, it holds safety approvals from CSA, CE, IEC, and UL.

851

Keystone Electronics

LUG TERMINAL;

1287-STR

Keystone Electronics

TAB TERMINAL;

61866-1

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Terminal Gender: FEMALE; Safety Approval: UL; No. of Ways: 1; Wire Cross Section: 15 mm2;

MS-25036-123

Molex

RING TERMINAL; Terminal Gender: FEMALE; Manufacturer Series: MS-25036;

MS25036-124

TE Connectivity

RING TERMINAL; Wire Gauge: 4 AWG; Wire Cross Section: 26.7 mm2; No. of Ways: 1; Safety Approval: UL;

3967

Vogt Ag Verbindungstechnik

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;

1757022

Phoenix Contact

Phoenix Contact 1757022 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 12A current and 320V voltage. It uses SCREW fastening method and supports wire gauge up to 12 AWG (2.5 mm²). Ideal for industrial applications requiring secure electrical connections.