Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

140814-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

140814-1
Description

TAB TERMINAL; Safety Approval: UL; Terminal Gender: MALE;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS123LT1G

Onsemi

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

Details

2N2222A

Crimson Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

350766-1

TE Connectivity

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

Details

BAV99

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Rfe International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

1N4148

Comchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Silicon Standard

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720AI-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Linear Technology

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

M85049/85-08W02

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;

Details

LAN8720A-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

140814-1 Technical Details

TYPE	DESCRIPTION
Terminal Gender:	Male
Terminal & Terminal Block Type:	Tab Terminal
Safety Approval:	UL

Category Top Products

2-33465-1

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1; Wire Cross Section: 15 mm2;

1936160

Phoenix Contact

Phoenix Contact 1936160 is a UL-approved STRIP TERMINAL BLOCK with 17 ways, rated at 250V/12A. Ideal for BOARD mounting, it ensures secure electrical connections in various applications.

MS25036-150

TE Connectivity

TE Connectivity's MS25036-150 is a UL-approved RING TERMINAL for 16 AWG wire with a rated voltage of 300V. Featuring a female terminal gender, it is ideal for applications requiring secure electrical connections in various industries.

TB300-03

Eaton Corporation

Eaton Corporation's TB300-03 is a 2-row BARRIER STRIP TERMINAL BLOCK with 6 ways, rated for 30A current and 600V voltage. It uses SCREW fastening method and supports wire gauge up to 6 AWG. Ideal for CABLE mounting, it holds safety approvals from CSA, CE, IEC, and UL.

281-665/281-400

Wago

MODULAR TERMINAL BLOCK;

35109

TE Connectivity

TE Connectivity 35109 is a UL-approved FEMALE RING TERMINAL for 10 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 6.64 mm2, it is ideal for electrical connections in various applications requiring secure and reliable terminal blocks.

1727023

Phoenix Contact

The Phoenix Contact 1727023 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 13.5A current and 200V voltage. It has safety approvals from CB, CCA, CSA, CUL, EAC, and SEV. Ideal for BOARD mounting applications with wire gauge up to 16 AWG and wire cross section of 1.5 mm2.

2091-1104/002-000

Wago

Wago 2091-1104/002-000 is a BARRIER STRIP TERMINAL BLOCK for CABLE mounting. It supports 14 AWG wire gauge with 1.5 mm2 wire cross section and rated voltage of 320V, current of 10A. Ideal for applications requiring secure connections in electrical wiring systems.

10-520-3-01

Concord Electronics

PCB TERMINAL;

282-681

Wago

The Wago 282-681 is a modular terminal block with 3 rows, DIN rail mounting, and CSA/UL safety approvals. It supports wire gauge up to 10 AWG and voltage rating of 600V, ideal for applications requiring a current rating of 30A. Fastened by spring-loaded mechanism, it accommodates wire cross-sections up to 6mm2 efficiently.

1729144

Phoenix Contact

Phoenix Contact 1729144 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 13.5A current and 400V voltage. It uses SCREW fastening method and supports wire gauge up to 16 AWG. Ideal for BOARD mounting, it has safety approvals like CB, CCA, CSA, CUL, EAC, GL.

2-520129-2

TE Connectivity

TE Connectivity's 2-520129-2 PUSH-ON TERMINAL is UL approved for 600V, 18 AWG wires. With 0.82 mm2 wire cross section, it's ideal for female terminals in various applications.

1827156

Phoenix Contact

The Phoenix Contact 1827156 is a UL-approved modular terminal block with a rated voltage of 160V and current of 8A. It accommodates wire gauges up to 16 AWG and wire cross-sections of 1.5mm2, featuring a screw fastening method for secure connections. Ideal for applications requiring reliable electrical connections in industrial settings.

2-34173-1

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; No. of Ways: 1; Wire Cross Section: 6 mm2; Safety Approval: UL;

9-160481-1

TE Connectivity

TE Connectivity 9-160481-1 is a female PUSH-ON TERMINAL with UL approval for 16 AWG wire, rated at 300V. Ideal for applications requiring secure connections with 1.5 mm2 wire cross section in terminals and terminal blocks.

1840405

Phoenix Contact

The Phoenix Contact 1840405 is a BARRIER STRIP TERMINAL BLOCK with 6 ways, rated for 8A current and 160V voltage. It uses SCREW fastening method and supports wire gauge up to 16 AWG. Ideal for BOARD mounting, it has safety approvals from CB, CCA, CSA, CUL, GOST, and UL.

1776228-1

TE Connectivity

TE Connectivity's 1776228-1 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 20A current and 300V voltage. It uses SCREW fastening method and supports 12 AWG wire gauge. Ideal for CABLE mounting applications, it holds CSA and UL safety approvals.

1SNK712064R0000

TE Connectivity

TE Connectivity's 1SNK712064R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. Featuring 4 AWG wire gauge, 16 mm2 wire cross section, and 1000 V rated voltage, it can handle up to 75 A current across its 3 ways. Ideal for industrial applications requiring secure electrical connections.

3-350820-2

TE Connectivity

TE Connectivity 3-350820-2 is a UL-approved PUSH-ON TERMINAL for 14 AWG wire, rated at 600V. With a wire cross section of 2.08 mm², it's ideal for female terminals in various applications requiring secure electrical connections.

1952270

Phoenix Contact

The Phoenix Contact 1952270 is a UL-approved barrier strip terminal block with a rated voltage of 160V and current of 8A. It accommodates wire gauge up to 16 AWG and wire cross-section of 1.5mm2, suitable for applications requiring secure cable mounting in industrial settings.