Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

TBD62083AFWG(Z,EHZ)

Manufacturer

Toshiba
Manufacturer's Part Number

TBD62083AFWG(Z,EHZ)
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBRS130LT3G

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

2N2222A

Loras Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

BSS138

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

Details

1N4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

DS18B20U

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;

Details

1N4148

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

Details

TBD62083AFWG(Z,EHZ) Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	2.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	2.85 mm
Surface Mount:	YES
No. of Terminals:	18
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BCDMOS
JESD-30 Code:	R-PDSO-G18
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.495 mm
Maximum Supply Voltage:	25 V
Nominal Output Peak Current Limit:	.4 A
Minimum Operating Temperature:	-40 Cel
No. of Functions:	8
Output Current Flow Direction:	SINK
Length:	11.515 mm
Peak Reflow Temperature (C):	NOT SPECIFIED
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

ULQ2003D1013TR

STMicroelectronics

ULQ2003D1013TR by STMicroelectronics is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40°C to 105°C, has a nominal output peak current limit of 0.5A, and uses bipolar technology. Ideal for applications requiring inverted output polarity and sink current flow direction.

L298N

STMicroelectronics

L298N by STMicroelectronics is a full bridge based peripheral driver with 2 functions and over current protection. It operates at a nominal voltage of 5V to 42V, with output polarity as true and source/sink current flow direction. This rectangular package is commonly used in applications requiring high power motor control.

FDC6329L

Onsemi

FDC6329L by Onsemi is a small outline peripheral driver with 6 terminals and built-in transient protection. It has a max output peak current limit of 1.9A, operates as a buffer or inverter, and is ideal for source current flow applications. The package dimensions are 2.9mm x 1.6mm x 1.22mm, making it suitable for compact electronic designs requiring surface mount components.

CSD88599Q5DCT

Texas Instruments

CSD88599Q5DCT by Texas Instruments is a half bridge based peripheral driver with a max supply voltage of 54V and operating temperature range of -55 to 150°C. With 22 terminals in a small outline package, it is ideal for applications requiring source and sink output current flow direction in military-grade environments.

MIC5841YWM-TR

Micrel

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;

TPIC6595DWRG4

Texas Instruments

TPIC6595DWRG4 by Texas Instruments is an SIPO-based peripheral driver with 8 functions, 5V nominal voltage, and 0.5A max output current. It is designed for automotive applications, featuring built-in transient protections and operating temperature range of -40 to 125°C.

BTS452RATMA1

Infineon Technologies

BTS452RATMA1 by Infineon Technologies is a small outline peripheral driver with 4 terminals. It has built-in protections for transient, over current, and over voltage. With a max supply voltage of 52V, it is suitable for various applications requiring source and sink output current flow direction.

VN7003AHTR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;

TBD62083AFNG,EL

Toshiba

Toshiba's TBD62083AFNG,EL is an 8-function peripheral driver with built-in transient protection. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style. Ideal for applications requiring sink output current flow direction and true output polarity.

TPS22975DSGR

Texas Instruments

TPS22975DSGR by Texas Instruments is a Peripheral Driver with 8 terminals, operating from -40 to 105 °C. It has a max supply voltage of 5.7 V and min supply voltage of 0.6 V, suitable for industrial applications requiring buffer or inverter-based peripheral drivers.

FPF2123

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

MAX14913AKN+

Analog Devices

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;

DS2482X-101+T

Maxim Integrated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: RECTANGULAR;

UDN2987LWTR

Allegro MicroSystems

Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.

VN808CM-E

STMicroelectronics

VN808CM-E by STMicroelectronics is a peripheral driver with 8 functions, operating at 10.5-32V, and offering built-in protections against various faults. With a max output current of 0.7A, it is suitable for automotive applications requiring a reliable buffer or inverter-based interface IC type. This compact driver has a small outline package style and can withstand temperatures ranging from -40 to 125°C.

BTT60101ERBXUMA1

Infineon Technologies

BTT60101ERBXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a max supply voltage of 36V and nominal output peak current limit of 9A. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics due to AEC-Q100 screening level.

BTS721L1

Infineon Technologies

BTS721L1 by Infineon is a MOS technology peripheral driver with 4 functions, suitable for automotive applications. It offers built-in protections against transient, over current, and over voltage. With a max supply voltage of 34V and nominal output peak current limit of 9.8A, it ensures reliable performance in various driving scenarios.

UDN2987A-6

Allegro MicroSystems

Allegro MicroSystems' UDN2987A-6 is a bipolar peripheral driver with 8-bit driver. It operates b/w -20°C to 85°C, with max output current of 0.35 A at power supplies of 4.75V to 35V. The rectangular in-line package with dual terminals makes it ideal for various applications requiring precise motor control and signal amplification.

MIC2981/82YWM-TR

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;

UDN2987A-6-T

Allegro MicroSystems

Allegro MicroSystems' UDN2987A-6-T is a 20-terminal peripheral driver with built-in transient, over current, and thermal protections. Operating at 4.75-35 V, it offers a max output current of 0.35 A and turn-on/off time of 1 us. Ideal for applications requiring sink flow direction in buffer or inverter-based interface ICs.