Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DP83630SQ/NOPB

Manufacturer

Texas Instruments
Manufacturer's Part Number

DP83630SQ/NOPB
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Zetex Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358AN

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

350766-1

TE Connectivity

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

BAV99-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

CRCW080510R0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

ERJ3GEY0R00V

Panasonic

ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

06035C103KAT2A

KYOCERA AVX

06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20

Maxim Integrated

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDC5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

DP83630SQ/NOPB Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	3 V
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	.8 mm
Maximum High Level Input Current:	.00001 Amp
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	48
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
JESD-30 Code:	S-PQCC-N48
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Interface Standard:	IEEE 1588
Interface IC Type:	LINE TRANSCEIVER
Width:	7 mm
Nominal Supply Voltage-1:	3.3 V
Maximum Supply Voltage-1:	3.6 V
Moisture Sensitivity Level (MSL):	2
Input Characteristics:	DIFFERENTIAL
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Receiver No. of Bits:	1
Length:	7 mm
Maximum Receive Delay:	0 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

MAX3232ECTE

Maxim Integrated

MAX3232ECTE by Maxim Integrated is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features EIA-232, TIA-232, V.24, and V.28 interface standards for communication applications. With BICMOS technology and SCHMITT TRIGGER input characteristics, it offers high reliability and performance in commercial-grade environments.

ST232BDR

STMicroelectronics

ST232BDR by STMicroelectronics is a Line Driver & Receiver with 2 functions, operating at 4.5-5.5V. It has a small outline package style, suitable for industrial applications like EIA-232 communication systems due to its Schmitt trigger input characteristics and dual terminal position.

MAX3295AUT-T

Maxim Integrated

LINE DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;

MAX232EEPE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

MAX13487EESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LTC2855HDE#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR;

ADM101EARMZ

Analog Devices

ADM101EARMZ by Analog Devices is a Line Driver & Receiver with 5V power supply, operating from -40 to 85°C. It features EIA-232 interface standard, BICMOS technology, and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable communication over long distances.

IL3285E

Nve

The Nve IL3285E is an EIA-485 line transceiver with 16 terminals, operating at a supply voltage range of 3.3V to 5.5V. It features a max transmit delay of 65ns and differential output for industrial applications requiring reliable communication over long distances. The compact rectangular package design makes it suitable for surface mount installations in various electronic systems.

MAX3485CSA-T

Maxim Integrated

MAX3485CSA-T by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for applications requiring fast data transmission in commercial temperature environments.

MAX3491EESD+T

Analog Devices

Analog Devices' MAX3491EESD+T is a line driver/receiver with 14 terminals, operating at 3-3.6V. It offers EIA-422/EIA-485 interface standards, differential output, and 35ns max transmit delay. Ideal for industrial applications requiring fast data transmission in small outline packages.

P82B96PWRG4

Texas Instruments

The Texas Instruments P82B96PWRG4 is a Line Transceiver IC with 2 functions, operating at temperatures from -40 to 85°C. It features a max supply voltage of 15V and min of 2V, suitable for industrial applications. This small outline package has a thin profile, with dual terminals and Gull Wing form factor.

LTC2862ACS8-2#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ZIOL2401#R

Integrated Device Technology

Line Driver or Receivers;

ISL83485IBZ

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SP3232EBCN-L/TR

Sipex

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX202ECSE

Maxim Integrated

MAX202ECSE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It features a totem-pole output and Schmitt trigger input characteristics. Ideal for EIA-232-E, TIA-232-E, V.28 interface standards in commercial temperature grade applications.

ICL3221EIAZ-T

Renesas Electronics

Renesas Electronics' ICL3221EIAZ-T is a CMOS line transceiver with 16 terminals, operating b/w -40 to 85°C. It supports EIA-232, TIA-232, V.24, and V.28 interfaces with Schmitt trigger input characteristics. Ideal for industrial applications requiring a small outline package with dual terminal position and matte tin finish.

SN65HVD1786DRG4

Texas Instruments

SN65HVD1786DRG4 by Texas Instruments is an EIA-485/TIA-485 line transceiver with a 5V nominal voltage. It features differential input and output characteristics, with a max transmit delay of 200ns. Ideal for industrial applications requiring reliable communication over long distances.

SN75176AD

Texas Instruments

SN75176AD by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 60ns max transmit delay, and 8 terminals. It's used in V.11 and EIA-422-B interfaces for data transmission applications requiring differential output and Schmitt trigger input characteristics.

MAX202ECSE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;