Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

3221-40022

Manufacturer

Sv Microwave
Manufacturer's Part Number

3221-40022
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: BRASS; Panel Mount: YES; Maximum Operating Frequency: 40 GHz;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

BSS138

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

1N4148WS

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z

Maxim Integrated

DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Details

BAV99

MICRODIODE ELECTRONICS SHENZHEN CO LTD

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Forward International Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

AH180-WG-7

Diodes Incorporated

AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

06035C104KAT2A

KYOCERA AVX

06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

3221-40022 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Mating Contact Finish:	GOLD OVER NICKEL
Voltage Standing Wave Ratio:	1.3
Filter Feature:	NO
IEC Conformity:	NO
Panel Mount:	YES
Mounting Type:	CABLE AND PANEL
JESD-609 Code:	e4
MIL Conformity:	NO
Coupling Type:	SNAP
Termination Contact Finish:	GOLD OVER NICKEL
Contact Gender:	FEMALE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF CONNECTOR
Contact Material:	BRASS
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	40 GHz
DIN Conformance:	NO

Category Top Products

U.FL-R-SMT-1(80)

Hirose Electric

U.FL-R-SMT-1(80) by Hirose Electric is a 50 ohm RF connector with liquid crystal polymer insulator, suitable for commercial applications up to 6 GHz. Featuring a dielectric voltage of 200VAC and operating temperature range from -40°C to 90°C, it offers high durability with 30 cycles lifespan. This surface mount connector has a compact design with dimensions of 0.122" x 0.118" x 0.049", making it ideal for board mounting in various electronic devices.

1742-6002

Sv Microwave

1742-6002 RF BMA Connector by Sv Microwave features a 50 ohm characteristic impedance, withstanding voltage of 1400VAC, and a max operating frequency of 18 GHz. Ideal for applications requiring high durability, such as in semi-rigid cable types for RF connections.

PL155AC-306

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: CRIMP; Total No. of Contacts: 1; Mounting Type: CABLE;

MS-156C(20)

Hirose Electric

The Hirose Electric MS-156C(20) RF connector features 0.4 dB insertion loss, 1.5 VSWR, and operates up to 11 GHz. It is a surface mount receptacle with TIN termination contact finish, ideal for high-frequency board applications.

1075

Amphenol

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

3-1393670-9

TE Connectivity

3-1393670-9 by TE Connectivity is a RF connector with SCREW coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. It is used in commercial applications up to 10 GHz frequency for high durability and low contact resistance. The right angle mounting style with solder termination makes it suitable for panel installation.

MS-147(06)

Hirose Electric

MS-147(06) by Hirose Electric is a 50 ohm RF connector with a body length of 0.228 inch and a body width of 0.213 inch. It has an insertion loss of 0.4 dB and can operate at temperatures ranging from -30 to 85 °C. This connector is commonly used in commercial applications requiring reliable, high-frequency connections up to 6 GHz.

R222508700

Radiall S A

The Radiall S A R222508700 RF SMP Connector features a body diameter of 0.164", insertion loss of 0.12 dB, and gold (Au) termination contact finish. With a max operating frequency of 18 GHz, it is ideal for board mounting in applications requiring a durable, 50 ohm coaxial connection with high insulation resistance and low voltage standing wave ratio.

272110

Amphenol

Amphenol 272110 RF connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring male plug connectors with silver finish over copper, suitable for cables with operating temperatures ranging from -65 to 165°C and frequencies up to 75 GHz.

MM4829-2702RA4

Murata Manufacturing

Murata MM4829-2702RA4 RF connector has 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications, it features a gold termination finish and withstands up to 500 cycles with a durability of 90°C max temp.

2334884-1

TE Connectivity

TE Connectivity 2334884-1 RF Connector has a body depth of 0.023", SNAP coupling type, and operates b/w -40 to 85°C. With characteristic impedance of 50 ohm, it is ideal for board mounting in applications up to 6 GHz frequency range.

700

Connecting Devices

RF CONNECTOR; Manufacturer Series: 7MM;

6802

Ddk

RF CONNECTOR; Body or Shell Style: PLUG; MIL Conformity: NO; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: NC;

U.FL-R-SMT-K(800)

Hirose Electric

OTHER RF CONNECTOR;

82_MMBX-S50-0-13/111_NM

Huber+suhner Ag

82_MMBX-S50-0-13/111_NM RF connector by Huber+suhner Ag features a body length of 0.232", gold termination finish, and a max operating frequency of 12.4 GHz. It is designed for applications requiring a 50 ohm characteristic impedance, such as high-frequency communication systems or test equipment setups.

90001

Lapp Group Pvt

RF CONNECTOR; Body or Shell Style: PLUG; Manufacturer Series: Y92; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO;

1055689-1

Tyco Electronics Amp

RF SSMT CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; MIL Conformity: NO; Termination Type: SURFACE MOUNT;

20566-001E-01

I-pex

20566-001E-01 by I-pex is a RF MHF CONNECTOR with SNAP coupling type. It has gold (Au) termination contact finish with nickel (Ni) barrier. This male receptacle connector is suitable for surface mount applications and offers multiple mating parts availability.

734160010

Molex

RF CONNECTOR;

73415-5300

Molex

Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.