Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
752	$0.864	$650.104

IRS2011SPBF

Manufacturer

Infineon Technologies
Manufacturer's Part Number

IRS2011SPBF
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

752 In Stock

Popular Products

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

C0603C104K5RACAUTO

KEMET Corporation

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.

Details

2N2222A

Central Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WS

General Instrument

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

CRG0805F10R

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

LL4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

1554216002

Molex

WIRE AND CABLE;

Details

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

IRS2011SPBF Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	10 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	15 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Sub-Category:	MOSFET Drivers
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	3.9 mm
Turn-off Time:	.08 us
Moisture Sensitivity Level (MSL):	2
Maximum Supply Voltage:	20 V
Turn-on Time:	.08 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.25
Output Current Flow Direction:	SINK
Length:	4.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	15

Category Top Products

IPS160HF

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;

BTS50302EKAXUMA1

Infineon Technologies

BTS50302EKAXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 5V to 28V and has a turn-on/off time of 230us. Ideal for automotive applications due to AEC-Q100 screening level and compact rectangular package design.

BSP452E6327

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Turn-off Time: 150 us; Nominal Output Peak Current Limit: 1.7 A;

NCV8402ASTT1G

Onsemi

NCV8402ASTT1G by Onsemi is a small outline peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 4.8A and interface IC type as buffer or inverter based. Ideal for applications requiring sink output current flow direction in automotive electronics.

SZNUD3160LT1G

Onsemi

SZNUD3160LT1G by Onsemi is a small outline, thin profile peripheral driver with built-in transient protection. Operating temperature range from -40 to 125°C makes it suitable for automotive applications. With sink output current flow direction and AEC-Q101 screening level, it's ideal for various automotive electronic systems.

MAX14914BATE+

Maxim Integrated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;

BTS711L1

Infineon Technologies

BTS711L1 by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline MOS technology driver is commonly used as a buffer or inverter based peripheral driver in various applications.

VN808TR-E

STMicroelectronics

STMicroelectronics' VN808TR-E is a peripheral driver with 8 functions, max supply voltage of 45V, and built-in protections. It is used as a buffer or inverter based peripheral driver for applications requiring a max output current of 0.5A and turn-on time of 100us.

DRV104PWPR

Texas Instruments

DRV104PWPR by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. It has a max output current of 1.2A, making it suitable for industrial applications requiring precise control of peripheral devices. With its small outline package style and source flow direction, this driver is ideal for compact electronic designs that demand efficient power management.

ISO1H812GAUMA1

Infineon Technologies

Infineon's ISO1H812GAUMA1 is a 36-terminal peripheral driver with 8-bit driver configuration and 0.625 A output current. It operates on power supplies of 3.3/5,15/30 V and has a max output peak current limit of 2.2 A. Ideal for applications requiring sink flow direction such as half bridge based interface ICs in small outline packages.

ITS4140NXT

Infineon Technologies

ITS4140NXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85°C with a supply voltage range of 4.9-60V. This small outline package IC is ideal for applications requiring sink output current flow direction and a nominal peak current limit of 0.2A.

VN7004CHTR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

BTT60302ERAXUMA1

Infineon Technologies

BTT60302ERAXUMA1 by Infineon Technologies is a Peripheral Driver with 2 functions, suitable for automotive applications. It offers built-in protections against transient, over current, and over voltage events. With a max supply voltage of 36V and turn-on/off time of 150us, it ensures reliable performance in various automotive systems.

IRS2304SPBF

Infineon Technologies

IRS2304SPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is a CMOS technology-based interface IC type, suitable for automotive applications. This small outline, shrink pitch package has built-in protections against transient and under voltage conditions.

BTS3408GXT

Infineon Technologies

BTS3408GXT by Infineon is a peripheral driver with 60V max supply voltage, built-in protections, and 0.55A nominal output peak current limit. It is used as a buffer or inverter-based peripheral driver in various applications requiring sink output current flow direction. The small outline package style makes it suitable for compact designs with its 1.75mm max seated height and dual terminal position.

BTS711L1XUMA1

Infineon Technologies

BTS711L1XUMA1 by Infineon is a MOS technology peripheral driver with 4 functions, 20 terminals, and built-in protections. It operates at supply voltages b/w 5V to 34V and has a nominal output peak current limit of 4.4A. This small outline package is ideal for applications requiring source and sink output current flow direction control.

VN920SP-E

STMicroelectronics

VN920SP-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and a max output current of 30A. It is used as a buffer or inverter based peripheral driver, providing protection against transient, over current, over voltage, thermal, and under voltage conditions.

TPS1HB08BQPWPRQ1

Texas Instruments

TPS1HB08BQPWPRQ1 by Texas Instruments is a 16-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125 °C with a supply voltage range of 6-18 V, making it suitable for automotive applications requiring high side drivers.

BTS3408GXUMA1

Infineon Technologies

BTS3408GXUMA1 by Infineon is a MOS peripheral driver with 60V max supply voltage, 0.55A output current limit, and 8us turn-on/off time. It's used for buffering or inverting signals in various applications requiring overcurrent, overvoltage, transient, and thermal protections.

ULN2003AIPWRE4

Texas Instruments

ULN2003AIPWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with open-collector output. It features transient protection, sink current flow direction, and bipolar technology. Ideal for applications requiring inverted output polarity in a small outline package with 16 terminals.