Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M-P-10-1

Manufacturer

Hirose Electric
Manufacturer's Part Number

M-P-10-1
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Body or Shell Style: PLUG; Manufacturer Series: M;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

BAV99

Kingwell Technonlogy

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Linear Technology

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

LL4148

Panjit International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FDV303N

Onsemi

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

Details

LM358ADR

Texas Instruments

LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.

Details

STM32H743ZIT6

STMicroelectronics

STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

1N4148

Capar Components

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

M-P-10-1 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Filter Feature:	NO
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	CABLE
MIL Conformity:	NO
Coupling Type:	THREADED
Termination Type:	SOLDER
Contact Gender:	MALE
Insulator Material:	TETRAFLUORIDE
Connector Type:	RF CONNECTOR
Additional Features:	APPLICABLE CABLES: RG-14/U; RG-15/U
Option:	GENERAL PURPOSE
Manufacturer Series:	M
Maximum Operating Frequency:	.2 GHz
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

73415-3593

Molex

Molex 73415-3593 RF SMP Connector features 50 ohm impedance, 40 GHz frequency, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high-frequency signal transmission with a max operating temperature of 155°C.

85-2

Amphenol

Amphenol's 85-2 is a RF connector with a max operating frequency of 11 GHz. It has a low insertion loss of 0.8 dB and is designed for right angle mounting on cables. Its insulator material is made of POLYTETRAFLUOROETHYLENE, making it suitable for various applications in the electronics industry.

EPA.00.250.NTN

Lemo Usa

EPA.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. Featuring FEMALE contact gender, SOLDER termination, and VSWR of 1.25, it's ideal for high-frequency electronic connections.

BJ77FL

Bel Fuse

BJ77FL RF TRB CONNECTOR by Bel Fuse features a 0.487" body depth, NICKEL shell finish, and BRASS shell material. Ideal for commercial applications up to 0.5 GHz frequency, it offers FEMALE contact gender with SOLDER termination for reliable performance in PANEL mounting setups.

73415-3320

Molex

The Molex 73415-3320 RF SMP Connector features a 0.236" body diameter and snap coupling type. With an insertion loss of 0.1 dB, it operates at temperatures ranging from -65 to 165°C. Ideal for commercial applications requiring a durable connector with a characteristic impedance of 50 ohm and max operating frequency of 40 GHz.

SF1521-60061-2S

Sv Microwave

RF CONNECTOR;

25-7630

Cinch Connectivity Solutions

RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Insulator Material: POLYPHENYLENE; Body or Shell Style: JACK;

DIN7A-PP-C-GF-ST-CA3

Samtec

Samtec DIN7A-PP-C-GF-ST-CA3 is a 1.0/2.3 DIN RF connector with 75 ohm impedance, gold over nickel termination, and snap coupling. Ideal for cable mounting applications, it has a body diameter of 0.325" and operates b/w -65°C to 125°C temperatures.

FFA.00.250.CTAC29

Lemo Usa

FFA.00.250.CTAC29 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring high-quality signal transmission in male plug configurations.

CONUFL001-SMD-T

Linx Technologies

CONUFL001-SMD-T by Linx Technologies is a threaded RF connector with dimensions of 0.122" x 0.118" x 0.049". It operates b/w -40°C to 90°C, has a characteristic impedance of 50Ω, and supports frequencies up to 6 GHz. Ideal for surface mount applications in various electronic devices.

U.FL-R-SMT-1(40)

Hirose Electric

U.FL-R-SMT-1(40) by Hirose Electric is a 50 ohm RF connector with 0.05 dB insertion loss, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 200VAC and insulation resistance of 500MΩ, it is ideal for board mounting in commercial settings. With a durability of 30 cycles and surface mount termination, this connector offers reliable performance in various electronic devices.

902-9040

Amphenol

Amphenol 902-9040 RF connector features 0.2 dB insertion loss, SNAP coupling type, and 50 ohm impedance. Ideal for applications up to 6 GHz frequency, it is a surface mount female connector suitable for board mounting in straight orientation.

272118

Amphenol

Amphenol 272118 RF connector features threaded coupling, 50 ohm impedance, and brass shell. Ideal for applications requiring high-frequency signal transmission up to 75 GHz. Suitable for use in environments with temperatures ranging from -65°C to 165°C.

2157248-1

TE Connectivity

TE Connectivity's 2157248-1 RF SMPM Connector features a 0.19" body diameter, SNAP coupling type, and POLYTETRAFLUOROETHYLENE insulator. Ideal for applications requiring a 50 ohm characteristic impedance, such as commercial-grade systems operating up to 26 GHz frequency with male contact gender and solder termination.

PL3455ACS-303

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Body Depth: 1.45 inch; Body or Shell Style: PLUG;

142-1000-002

Vertiv

RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD (50) OVER NICKEL (5); IEC Conformity: NO;

5-1814822-3

TE Connectivity

TE Connectivity 5-1814822-3 RF Connector has a body diameter of 0.413" and operates at temperatures from -55 to 85°C. With characteristic impedance of 75 ohm, it is suitable for RG 6 cables and supports up to 1 GHz frequency. Ideal for panel mounting applications requiring a male plug connector with nickel finish brass shell.

142-1002-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: MALE; Body or Shell Style: PLUG; Panel Mount: NO; Mounting Type: CABLE; Manufacturer Series: SLIDE-ON;

132-0115-0002

Malco Microdot Uk

RF CONNECTOR; Contact Gender: MALE; IEC Conformity: NO; Coupling Type: THREADED; Termination Type: CRIMP SOLDER; MIL Conformity: NO;

ERN.00.250.CTL

Lemo Usa

ERN.00.250.CTL by Lemo Usa is a panel mount RF F CONNECTOR with 0.315" body diameter and 0.22" body depth. Featuring SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance, it's ideal for applications requiring a max operating frequency of 1.5 GHz.