Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SMP-FS-LDPCT

Manufacturer

Amphenol
Manufacturer's Part Number

SMP-FS-LDPCT
Description

RF SMP CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Total No. of Contacts: 1; Insulator Material: POLYTETRAFLUOROETHYLENE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

LM107H

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NE555D

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148WT

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;

Details

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Semitron

RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;

Details

2N7002

Transys Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;

Details

1N4148WS

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW080510R0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

Details

2N2222A

Vpt Components

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

Details

SS14

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10K

TE Connectivity

TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.

Details

LL4148GS08

Temic Semiconductors

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

Details

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720AI-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

SMP-FS-LDPCT Technical Details

TYPE	DESCRIPTION
Voltage Standing Wave Ratio:	1.15
Sub-Category:	Other RF Connectors
Shell Finish:	GOLD
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	165
Contact Gender:	MALE
Connector Type:	RF SMP CONNECTOR
Manufacturer Series:	SMP
Mounting Option-1:	LOCKING
Mounting Style:	STRAIGHT
Other Names:	ARF2268 3937-SMP-FS-LDPCT
No. of Ports:	1
Contact Style:	COAX
Durability:	500 Cycles
Mounting Type:	BOARD
Body Depth:	.197 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Dielectric Withstanding Voltage (V):	700VAC
Terminal Length:	.134 inch
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Maximum Operating Frequency:	12 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
Reliability:	COMMERCIAL

Category Top Products

SF1521-60150

Sv Microwave

SF1521-60150 by Sv Microwave is a 2.92mm RF connector with threaded coupling, suitable for board mounting. With a max operating frequency of 40 GHz and VSWR of 1.25, it has a characteristic impedance of 50 ohm. This female jack connector is made of stainless steel, ideal for applications requiring high-frequency signal transmission.

PL155-47

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Shell Material: BRASS; Maximum Operating Frequency: .5 GHz;

73415-3032

Molex

Molex 73415-3032 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz max operating frequency. Ideal for high-frequency signal transmission in applications requiring a right-angle jack connector with snap coupling type and PTFE insulator material.

1996705-4

TE Connectivity

TE Connectivity's 1996705-4 RF SMPM CONNECTOR features SNAP coupling, stainless steel shell, and right angle mounting. With dimensions of 1.12" x 0.85" x 0.392", it operates b/w -55 to 105°C. Ideal for board mounting applications requiring a male contact gender with screw termination.

90001

Lapp Group Pvt

RF CONNECTOR; Body or Shell Style: PLUG; Manufacturer Series: Y92; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO;

619401-1

TE Connectivity

TE Connectivity 619401-1 RF Connector features SNAP coupling, PCT-POLYESTER insulator, and 75 ohm impedance. Ideal for board mounting in applications requiring a right angle jack with a max operating frequency of 5 GHz.

119S144-40ML5

Rosenberger Hochfrequenztechnik & Kg

Rosenberger's 119S144-40ML5 RF SMP Connector features 0.09 dB insertion loss, threaded coupling, and gold termination. Ideal for applications up to 10 GHz, it is a male plug with surface mount termination for 50 ohm impedance boards.

85-1

Amphenol

The Amphenol 85-1 RF Connector features a low insertion loss of 0.8 dB and a voltage standing wave ratio of 1.1, suitable for applications up to 11 GHz. With a snap coupling type and PTFE insulator material, it is designed for use in high-frequency cable connections with a characteristic impedance of 50 ohms. Operating temperatures range from -40°C to 85°C, making it versatile for various environments.

925-123C-51A

Amphenol

RF SMPM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

H.FL-LP-DFS111(01)

Hirose Electric

H.FL-LP-DFS111(01) by Hirose Electric is a 50 ohm RF connector with SNAP coupling, suitable for applications up to 3 GHz. Features include tin contact finish, solder termination, and right angle mounting. Ideal for high-frequency cable connections in various electronic devices.

302114

Amphenol

Amphenol 302114 RF SMP Connector features gold finish, 50 ohm impedance, and operates up to 26.5 GHz. Ideal for board mounting applications with male contact gender and jack body style. Made of beryllium copper shell material, it withstands temperatures from -65 to 165 °C.

PL3455ACS-303

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Body Depth: 1.45 inch; Body or Shell Style: PLUG;

BJ76

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Total No. of Contacts: 1; Contact Style: COAX;

BJ3459ACP-201

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Finish: NICKEL; Contact Style: COAX; No. of Ports: 1;

SF1621-60026-1S

Sv Microwave

SF1621-60026-1S by Sv Microwave is a threaded RF connector with 0.283 dB insertion loss, 50 ohm impedance, and 50 GHz operating frequency. Ideal for panel mount applications in high-frequency environments due to its stainless steel shell, polyetherimide insulator, and surface mount termination.

90002

Ddk

RF CONNECTOR; Manufacturer Series: Y92; Body or Shell Style: JACK; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO;

29976BM-2-006

Huber+suhner Ag

29976BM-2-006 by Huber+suhner Ag is a threaded RF connector with gold-plated contacts, suitable for board and panel mounting. With an insertion loss of 0.373 dB and VSWR of 1.3, it operates at temperatures ranging from -65 to 165°C. This plug-type connector has a max frequency of 65 GHz, making it ideal for high-frequency applications.

1222-4011

Sv Microwave

1222-4011 RF SMP Connector by Sv Microwave features a 0.135" body diameter, 0.62 dB insertion loss, and SNAP coupling type. Ideal for applications requiring a 50 ohm characteristic impedance, this connector operates up to 26.5 GHz with a VSWR of 1.3, making it suitable for high-frequency communication systems.

18S141-40ML5

Rosenberger Hochfrequenztechnik & Kg

18S141-40ML5 RF SMP connector by Rosenberger features 0.4 dB insertion loss, 50 ohm impedance, and 65 GHz max operating frequency. Ideal for commercial applications, it offers a durable design with POLYTETRAFLUOROETHYLENE insulator material and surface mount termination.

PL455ACFLS-222

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: CRIMP; No. of Ports: 1; Mounting Type: CABLE;