Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

925-138J-51P

Manufacturer

Amphenol
Manufacturer's Part Number

925-138J-51P
Description

RF SMPM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Datasheet

Datasheet

Not In Stock

Popular Products

NC7WZ07P6X

Onsemi

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

LL4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

M39029/58-360

Fct Electronic

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

Details

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

1N4148WS

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

Details

BAV99

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z/T&R

Maxim Integrated

DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.

Details

2N7002

Calogic

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

SMBJ18CA

First Components International

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

NC7WZ07P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

925-138J-51P Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Termination Contact Finish:	NOT APPLICABLE
Connector Type:	RF SMPM CONNECTOR
Contact Material:	NOT SPECIFIED

Category Top Products

82_MMBX-50-0-14/111_NE

Huber+suhner Ag

82_MMBX-50-0-14/111_NE by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.

11_QMA-50-2-1/133_NH

Huber+suhner Ag

11_QMA-50-2-1/133_NH by Huber+suhner Ag is a RF CONNECTOR with SNAP coupling, suitable for cables with 0.413" diameter. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it's ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85°C.

925-169J-51PT

Amphenol

RF SMPM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;

19S104-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S104-40ML5 by Rosenberger Hochfrequenztechnik & Kg is an RF SMP CONNECTOR with a max operating frequency of 26.5 GHz and insertion loss of 0.17 dB. It features a SNAP coupling type, MIL conformity, and liquid crystal polymer insulator material. Ideal for high-frequency applications requiring reliable signal transmission in electronic systems.

AFI-J-P-GF-ST-SM1

Samtec

Samtec's AFI-J-P-GF-ST-SM1 RF connector features gold termination, PTFE insulator, and brass body. With 50 ohm impedance, it is ideal for commercial applications requiring durability up to 100 cycles. This straight jack connector with solder termination is designed for board mounting with a locking option.

MM8130-2600RA2

Murata Manufacturing

Murata MM8130-2600RA2 RF Connector features 0.2 dB insertion loss, 1.3 VSWR, and 6 GHz max operating frequency. Ideal for board mounting in applications requiring a 50 ohm characteristic impedance and surface mount termination.

1211-66195-TD

Sv Microwave

RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;

925-144J-51PT

Amphenol

RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

MM8130-2600RB8

Murata Manufacturing

MM8130-2600RB8 by Murata Manufacturing is a RF connector with a body length of 0.098 inch, body diameter of 0.083 inch, and insulation resistance of 500000000 ohm. It is commonly used in commercial applications for its durability, withstanding voltage of 450VAC, and max operating frequency of 6 GHz.

96_MMPX-50-0-2/111_NM

Huber+suhner Ag

96_MMPX-50-0-2/111_NM RF connector by Huber+suhner Ag features a SNAP coupling type, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm characteristic impedance. Ideal for applications requiring a durable FEMALE JACK connector with a max operating frequency of 65 GHz on BOARD mounting.

R222423720

Radiall S A

R222423720 RF connector by Radiall S A features a 0.25" body with SNAP coupling, 50 ohm impedance, and 1.15 VSWR for applications up to 40 GHz. Ideal for surface mount termination on boards, it operates b/w -65°C to 165°C with an insertion loss of 0.76 dB.

73412-0110

Molex

Molex 73412-0110 RF Connector features 50 ohm impedance, 6 GHz frequency, and 90VAC dielectric voltage. Ideal for commercial applications, it offers a durable design with gold nickel finish and liquid crystal polymer insulator for reliable performance in temperatures ranging from -40 to 90°C.

D4S12H-40MA5-E

Rosenberger Hochfrequenztechnik & Kg

RF CONNECTOR; Manufacturer Series: D4S12H-40MA5;

BJ159-47

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1700VAC; Body or Shell Style: JACK; Mounting Style: STRAIGHT;

282119-75

Amphenol

Amphenol 282119-75 RF connector features 1050VAC Dielectric Withstanding Voltage, 0.839" Body Depth, and -40 to 75°C Operating Temperature. Ideal for RF applications up to 2GHz, this crimp termination connector with a nickel finish is durable for commercial use in cable installations.

GRF1-J-P-04-E-RA-TH1

Samtec

Samtec's GRF1-J-P-04-E-RA-TH1 RF Connector features threaded coupling, gold over nickel termination, and PTFE insulator. With 50 ohm impedance and 6 GHz frequency, it suits board mounting applications requiring female contact gender in right angle configuration.

925-137J-51P

Amphenol

RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

SF1211-66214-1S

Sv Microwave

SF1211-66214-1S by Sv Microwave is a RF SMP CONNECTOR with 0.379 dB Insertion Loss, 50 ohm Impedance, and 40 GHz Operating Frequency. Ideal for PANEL MOUNT applications, it features SNAP Coupling Type and POLYTETRAFLUOROETHYLENE Insulator Material.

MM4829-2702B

Murata Manufacturing

Murata Manufacturing's MM4829-2702B RF connector features 50 ohm impedance, 0.1 dB insertion loss, and 450VAC dielectric voltage. Ideal for commercial applications up to 6 GHz frequency range, with a durability of 500 cycles.

19S101-40ML5-NM

Rosenberger Hochfrequenztechnik & Kg

The RF SMP connector 19S101-40ML5-NM by Rosenberger features a characteristic impedance of 50 ohm, insertion loss of 0.26 dB, and max operating frequency of 26.5 GHz. Ideal for commercial applications, this plug-style connector with liquid crystal polymer insulator is designed for board mounting in high-frequency environments.