Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

6802

Manufacturer

Ddk
Manufacturer's Part Number

6802
Description

RF CONNECTOR; Body or Shell Style: PLUG; MIL Conformity: NO; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: NC;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

LL4148

Promax-johnton

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Pro-an Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;

Details

2N2222A

Vishay Sprague

NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;

Details

BAV99

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Diotec Semiconductor Ag

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;

Details

1N4148

Nte Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

LM317T

Samsung

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;

Details

DS18B20U

Maxim Integrated

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

2N7002DWH6327XTSA1

Infineon Technologies

2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

ECS-.327-12.5-17X-TR

Ecs International

ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.

Details

LM358MX

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

1N4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

EU2B-YS2J03F

Idec

ROTARY SWITCH;

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

6802 Technical Details

TYPE	DESCRIPTION
MIL Conformity:	NO
IEC Conformity:	NO
Connector Type:	RF CONNECTOR
Manufacturer Series:	NC
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

1065-1RQD

Winchester Interconnect

1065-1RQD by Winchester Interconnect is a male coax plug RF connector with brass shell, nickel over copper finish, and polyethylene insulator. It features crimp termination for cable mounting and locking option-1 for reliability in commercial applications.

1055689-1

TE Connectivity

The TE Connectivity 1055689-1 RF SSMT Connector features a 0.15 dB insertion loss, 5000000000 ohm insulation resistance, and 6 GHz max operating frequency. Ideal for commercial applications, this male plug connector with a characteristic impedance of 50 ohm is designed for board mounting in straight orientation.

R285.001.021

Radiall S A

R285.001.021 by Radiall S A is a SNAP RF CONNECTOR with 50 ohm impedance, suitable for applications up to 6 GHz frequency. It features RIGHT ANGLE mounting style and can operate in temperatures ranging from -40°C to 90°C, making it ideal for various RF connectivity needs.

PE4183

Pasternack Enterprises

PE4183 by Pasternack Enterprises is a RF HN CONNECTOR with 50 ohm impedance, gold/nickel finish, and 10 GHz frequency. Ideal for panel mounting in applications requiring high-frequency signal transmission.

GRF1-J-P-04-E-RA-TH1

Samtec

Samtec's GRF1-J-P-04-E-RA-TH1 RF Connector features threaded coupling, gold over nickel termination, and PTFE insulator. With 50 ohm impedance and 6 GHz frequency, it suits board mounting applications requiring female contact gender in right angle configuration.

AFI-J-P-HF-ST-MT1

Samtec

Samtec AFI-J-P-HF-ST-MT1 RF connector features 50 ohm impedance, SNAP coupling, and 6 GHz operating frequency. Ideal for board mounting applications requiring a female jack connector with POLYTETRAFLUOROETHYLENE insulator material.

DIN7A-J-P-GF-RA-BH1

Samtec

Samtec DIN7A-J-P-GF-RA-BH1 is a 75 ohm RF connector with gold finish, right angle mounting, and female contact gender. Ideal for board and panel mounting applications requiring threaded coupling and PTFE insulator material. Body dimensions: 0.276" L x 0.163" D x 0.276" W x 0.76" D.

MM8430-2600RA1

Murata Manufacturing

Murata Manufacturing's MM8430-2600RA1 RF connector offers low insertion loss of 0.1 dB and high durability with 500 cycles. With a max operating frequency of 6 GHz, it is ideal for commercial applications requiring a characteristic impedance of 50 ohm and surface mount termination.

19S102-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S102-40ML5 RF SMP connector by Rosenberger features 0.63 dB insertion loss, 1.5 VSWR, and operates up to 40 GHz. With MIL conformity, GOLD finish, and SNAP coupling, it is ideal for high-frequency applications requiring a characteristic impedance of 50 ohm.

EZ-1200-78EIA-RA-2

Times Microwave Systems

RF CONNECTOR;

SMP-MSLD-PCS-2

Amphenol

RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

222128-10

Amphenol

Amphenol 222128-10 RF Connector features threaded coupling, Delrin/Polypropylene insulator, and tin contact finish. Ideal for board and panel mounting in applications requiring reliable RF connections.

2391

Pomona Electronics

Pomona Electronics 2391 RF Connector features gold finish, bayonet coupling, and brass contact material. With 50 ohm impedance, it is ideal for solder termination in male-female connections. Suitable for straight mounting applications in various RF devices.

ERN.00.250.CTL

Lemo Usa

ERN.00.250.CTL by Lemo Usa is a panel mount RF F CONNECTOR with 0.315" body diameter and 0.22" body depth. Featuring SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance, it's ideal for applications requiring a max operating frequency of 1.5 GHz.

0734160010

Molex

Molex 0734160010 is a RF 7/16 DIN CONNECTOR with SNAP coupling, suitable for 50 ohm systems up to 7 GHz. It features FEMALE contact gender and JACK body style, designed for PANEL mounting in straight configuration. Ideal for high-frequency applications requiring reliable RF connections.

R222900100W

Radiall S A

R222900100W RF SMP connector by Radiall S A features a body diameter of 0.173", insertion loss of 0.42 dB, and insulation resistance of 5000000000 ohm. Ideal for applications requiring a durable, high-frequency connector with a characteristic impedance of 50 ohm, such as in commercial settings up to 12.4 GHz frequency range.

131-0140-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO;

73412-0110

Molex

Molex 73412-0110 RF Connector features 50 ohm impedance, 6 GHz frequency, and 90VAC dielectric voltage. Ideal for commercial applications, it offers a durable design with gold nickel finish and liquid crystal polymer insulator for reliable performance in temperatures ranging from -40 to 90°C.

73300-0110

Molex

Molex 73300-0110 RF SMPM Connector features threaded coupling, 50 ohm impedance, and operates up to 65 GHz. Ideal for board mounting applications requiring male plug connectors with solder termination.

RF292A4JAAADAA

Bulgin

OTHER RF CONNECTOR;