Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1196

Manufacturer

Zierick Manufacturing
Manufacturer's Part Number

1196
Description

WIRE TERMINAL; Manufacturer Series: 1196;
Datasheet

Datasheet

Not In Stock

Popular Products

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

ABS06-32.768KHZ-T

Abracon

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

Details

2N7002

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Details

BAV99

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

1N4148W-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

BSS138W-7-F

Multicomp Pro

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;

Details

LL4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

LL4148

Weitron Technology

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

2N2222A

Zetex Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1196 Technical Details

TYPE	DESCRIPTION
Product Type:	Wire Terminal
Product Series:	1196

Category Top Products

1851258

Phoenix Contact

The Phoenix Contact 1851258 is a Barrier Strip Terminal Block with 4 ways, rated for 8A current and 160V voltage. Featuring spring-loaded fastening method, it accepts wire gauge up to 16 AWG (1.5 mm2). Ideal for applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

36.06

Altech

The Altech 36.06 is a BARRIER STRIP TERMINAL BLOCK with BOARD mounting, rated for 300V voltage and 15A current. It has CSA, IEC, UL, VDE safety approvals and accommodates wire gauge up to 10 AWG. Ideal for applications requiring secure connections in industrial settings with multiple ways available for wiring configurations.

AMPS-0-0640907-1

TE Connectivity

TE Connectivity's AMPS-0-0640907-1 is a PUSH-ON TERMINAL with 10 AWG wire gauge, rated for 300V. UL approved, it suits applications requiring FEMALE terminals with 6.64 mm2 wire cross section.

19002-0008

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Wire Cross Section: .8 mm2; Terminal Gender: FEMALE; Manufacturer Series: 19002;

4164

Advanced Interconnections

MODULAR TERMINAL BLOCK; Fastening Method: SCREW; Wire Gauge: 0 AWG; Voltage (Rated): 600 V; No. of Ways: 8; Current (Rated): 255 A;

1727010

Phoenix Contact

Phoenix Contact 1727010 is a BARRIER STRIP TERMINAL BLOCK for BOARD mounting. With a rated voltage of 200V and current of 13.5A, it accommodates wire gauge up to 16 AWG. Ideal for applications requiring secure electrical connections in limited space environments.

51863-3

TE Connectivity

TE Connectivity 51863-3 is a UL-approved FEMALE RING TERMINAL for 20 AWG wire with a rated voltage of 300 V. Ideal for 0.6 mm2 wire cross sections, it ensures secure electrical connections in various applications.

AMP-0-0640903-1

TE Connectivity

TE Connectivity's AMP-0-0640903-1 is a FEMALE PUSH-ON TERMINAL with UL approval, rated for 300V voltage and 18 AWG wire gauge. Ideal for 0.96 mm2 wire cross sections, it excels in various applications requiring reliable electrical connections.

3967

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

1745894

Phoenix Contact

The Phoenix Contact 1745894 is a Barrier Strip Terminal Block with 2 ways, rated for 8A current and 160V voltage. Featuring push-in fastening method, it accepts wire gauge up to 16 AWG (1.5 mm2). Ideal for applications requiring secure electrical connections in industrial settings.

51864-1

TE Connectivity

TE Connectivity's 51864-1 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Its wire cross section is 2.08 mm2, making it ideal for various electrical applications requiring secure connections and reliable performance.

320553

TE Connectivity

TE Connectivity 320553 is a UL-approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.42 mm2, it's ideal for female terminals in various electrical applications.

MS-25036-101

Molex

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 1.42 mm2;

MPT0,5/2-2,54

Phoenix Contact

Phoenix Contact's MPT0,5/2-2,54 is a 2-way barrier strip terminal block with a rated current of 6A and voltage of 160V. It supports wire gauge up to 20 AWG and wire cross-section of 0.5mm². Ideal for board mounting applications, it holds safety approvals from CSA, CUL, EAC, and UL.

8-323912-1

TE Connectivity

TE Connectivity's 8-323912-1 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire with a rated voltage of 300V. Ideal for applications requiring secure electrical connections in terminals and terminal blocks.

MSTB2.5/2-ST-5.08

Phoenix Contact

Phoenix Contact's MSTB2.5/2-ST-5.08 is a 2-way barrier strip terminal block with a rated voltage of 250V and current of 12A, suitable for 12 AWG wires. It features screw fastening and safety approvals like CB, CSA, UL, making it ideal for industrial applications requiring secure wire connections.

1196

Not In Stock

Popular Products

LM555CMX

BSS138DW-7-F

ABS06-32.768KHZ-T

2N7002

BAV99

ULN2803A

1N4148

LL4148

LM2675M-ADJ/NOPB

LM7805CT

1N4148W-7-F

1N4148

ERJU06F10R0V

BSS138W-7-F

LL4148

LM317T

LL4148

BAV99

ABS10-32.768KHZ-T

2N2222A

1196 Technical Details

Category Top Products

1851258

36.06

AMPS-0-0640907-1

19002-0008

4164

1727010

51863-3

AMP-0-0640903-1

3967

1745894

51864-1

320553

MS-25036-101

MPT0,5/2-2,54

8-323912-1

MSTB2.5/2-ST-5.08

B-008-11

18721-50

2-321045-1

2103