Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1711738

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1711738
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PA, UL 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 400 V;
Datasheet

Not In Stock

Popular Products

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CDSOT23-SM712

Bourns

Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

MBRA160T3G

Onsemi

MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

LL4148

Weitron Technology

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

NDT2955

National Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

LL4148

Secos

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

1N4148WS

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

BSS138

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;

Details

1552200168

Molex

WIRE AND CABLE;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z/T&R

Maxim Integrated

DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.

Details

1711738 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Other Names:	MKDS 3/3-5.08 277-1028 MKDS3/3-5,08
Total Ways:	3
Total Rows:	1
Fastening Style:	Screw
Wire Gauge:	12 AWG
Total Decks:	1
Rated Voltage:	400 V
Wire Cross Section:	2.5 mm²
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	CB; CSA; CUL; GL; UL; VDE
Additional Features:	PA, UL 94V-0
Rated Current:	24 A

Category Top Products

33466-1

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 15 mm2; No. of Ways: 1; Safety Approval: UL;

1287-ST

Keystone Electronics

TAB TERMINAL; Current (Rated): 15 A; Safety Approval: UL; Terminal Gender: MALE;

1729131

Phoenix Contact

Phoenix Contact 1729131 is a UL-approved barrier strip terminal block for board mounting. It supports wire gauge up to 16 AWG with rated voltage of 250V and current of 13.5A. Ideal for applications requiring secure connections in industrial control systems.

31249116

Metz Connect Usa

The Metz Connect Usa 31249116 is a Barrier Strip Terminal Block with 16 ways, rated for 12A current and 400V voltage. It uses a screw fastening method and accepts wire gauge up to 12 AWG (2.5 mm2). Ideal for CUL, SEV, UL safety approved applications requiring secure electrical connections.

1SNK510150R0000

TE Connectivity

TE Connectivity's 1SNK510150R0000 is a DIN RAIL mounted modular terminal block with UL safety approval. It supports wire gauge up to 4 AWG and wire cross section of 16 mm2. Ideal for various applications requiring a single way connection.

12129493

Delphi Connection Systems

PUSH-ON TERMINAL; Wire Cross Section: 3 mm2; Manufacturer Series: 12; Terminal Gender: FEMALE;

2-34124-1

TE Connectivity

RING TERMINAL; Wire Gauge: 16 AWG; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 2 mm2;

18615

Molex

The Molex 18615 is a BARRIER STRIP TERMINAL BLOCK with 2 rows and 15 ways. It supports wire gauge up to 12 AWG, rated for 20A current at 300V voltage. Ideal for BOARD mounting applications, it holds CSA and UL safety approvals.

2-33457-2

TE Connectivity

RING TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;

35108

TE Connectivity

TE Connectivity 35108 is a UL-approved RING TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6.64 mm2, it's ideal for female terminals in various applications.

MS-25036-111

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; Wire Cross Section: 6 mm2; Safety Approval: CSA; UL;

12129493

Aptiv

PUSH-ON TERMINAL; Terminal Gender: FEMALE; Wire Cross Section: 3 mm2;

2091-1104/002-000

Wago

Wago 2091-1104/002-000 is a BARRIER STRIP TERMINAL BLOCK for CABLE mounting. It supports 14 AWG wire gauge with 1.5 mm2 wire cross section and rated voltage of 320V, current of 10A. Ideal for applications requiring secure connections in electrical wiring systems.

221-415

Wago

Wago 221-415 SPLICE TERMINAL rated at 32A/450V, accepts 12 AWG wire with 4mm2 cross section. UL approved for secure electrical connections in various applications.

2103

Advanced Interconnections

PCB TERMINAL; Manufacturer Series: 2103; Terminal Gender: FEMALE;

39357-0002

Molex

Molex 39357-0002 is a UL-approved barrier strip terminal block with 16 AWG wire gauge, rated for 300V and 12A current. It has a mounting type of BOARD and uses screws for fastening. Ideal for applications requiring secure electrical connections in limited space.

8-640903-1

Tyco Electronics Amp

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Voltage (Rated): 300 V; Wire Cross Section: .96 mm2; Safety Approval: UL; Terminal Gender: FEMALE;

830

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

19002-0009

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Wire Cross Section: .8 mm2;

3-140

Bel Fuse

3-140 by Bel Fuse is a BARRIER STRIP TERMINAL BLOCK with 2 rows and 3 ways. It has a rated voltage of 250V, current of 15A, and supports wire gauge up to 16 AWG. Ideal for applications requiring secure electrical connections in industrial settings with CSA and UL safety approvals.