Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
777	Request Pricing	-

XTR117AIDRBTG4

Manufacturer

Texas Instruments
Manufacturer's Part Number

XTR117AIDRBTG4
Description

ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
Datasheet

Datasheet

777 In Stock

Popular Products

2N2222A

Cobham Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

SMMBT3904LT1G

Onsemi

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

BSS123,215

NXP Semiconductors

NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

LM317T

Samsung

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

SS14

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

MBRM140T1G

Onsemi

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

SS14

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

XTR117AIDRBTG4 Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Width (mm):	3 mm
Maximum Seated Height:	1 mm
Minimum Supply Voltage (Vsup):	7.5 V
Maximum Supply Current (Isup):	.25 mA
Sub-Category:	Other Analog ICs
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	BIPOLAR
JESD-30 Code:	S-PDSO-N8
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	125 Cel
Package Code:	HVSON
Nominal Supply Voltage (Vsup):	24 V
Moisture Sensitivity Level (MSL):	3
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	LCC8(UNSPEC)
Other IC type:	ANALOG CIRCUIT
Length:	3 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	AUTOMOTIVE
Maximum Supply Voltage (Vsup):	40 V
Power Supplies (V):	24

Category Top Products

MAX31826MUA+

Maxim Integrated

ANALOG CIRCUIT; Temperature Grade: MILITARY; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;

ADXRS453BEYZ-RL

Analog Devices

ADXRS453BEYZ-RL by Analog Devices is a surface mount chip carrier with 14 terminals. It operates at a temperature range of -40 to 105°C and has a nominal voltage of 5V. This industrial-grade analog circuit is commonly used in applications requiring precise motion sensing.

MCP3905A-E/SS

Microchip Technology

MCP3905A-E/SS by Microchip Technology is a 24-terminal IC with 2 channels, operating at -40 to 125°C. It has a supply voltage range of 4.5-5.5V and max current of 3mA, suitable for automotive applications due to its TS16949 screening level and small outline package style.

MCP9600T-E/MX

Microchip Technology

MCP9600T-E/MX by Microchip: 3.3V nominal supply, -40 to 125°C operating temp, automotive grade. Square chip carrier with matte tin finish, ideal for analog circuits in automotive applications. Surface mountable with 20 terminals and compact size of 5x5mm.

LSM303AHTR

STMicroelectronics

LSM303AHTR by STMicroelectronics is a 12-terminal IC with a supply voltage range of 1.71V to 1.98V, suitable for industrial applications. It has a compact square package style, very thin profile, and fine pitch design, making it ideal for surface mount installations. With an operating temperature range from -40°C to 85°C, this analog circuit IC is perfect for various sensor-based systems requiring precise measurements in harsh environments.

LSM303DLHC

STMicroelectronics

STMicroelectronics LSM303DLHC is a 14-terminal IC with 2.5V nominal voltage, operating from -40 to 85°C. It features a CMOS technology, suitable for industrial applications requiring precise analog circuit functions in a compact rectangular package.

165

Calex Mfg

Other Semiconductors;

THN15-2411WI

Powersolve Electronics

Other Semiconductors;

MAX31856MUD+T

Analog Devices

MAX31856MUD+T by Analog Devices is a small outline, thin profile, shrink pitch IC with 14 terminals. It operates at a supply voltage of 3.3V and has a max temperature of 125°C. This military-grade device is commonly used for temperature sensing applications.

LT4320HDD#PBF

Analog Devices

LT4320HDD#PBF by Analog Devices is an 8-terminal IC with a small outline, suitable for automotive applications. With a temperature range of -40 to 125°C, it features matte tin terminal finish and no-lead terminal form. This surface-mount device in square package shape is ideal for various analog circuit functions.

LM3881MM/NOPB

Texas Instruments

LM3881MM/NOPB by Texas Instruments is an 8-terminal IC with a supply voltage range of 2.7V to 5.5V, suitable for automotive applications. It features a small outline package style, matte tin terminal finish, and operates b/w -40°C to 125°C. With low supply current and gull wing terminals, it is ideal for analog circuit designs in compact spaces.

ADIS16505-1BMLZ

Analog Devices

ADIS16505-1BMLZ by Analog Devices is a 100-terminal IC with 3.3V nominal voltage, suitable for industrial applications. It features a temperature range of -40 to 105°C and comes in a square grid array package style. With surface mount capability and moisture sensitivity level of 5, it is ideal for analog circuit designs.

LT4363CMS-2#PBF

Linear Technology

ANALOG CIRCUIT; Temperature Grade: COMMERCIAL; No. of Terminals: 12; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

LMP8601QMAX/NOPB

National Semiconductor

ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

LTC6992HS6-2#TRPBF

Linear Technology

ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

LSM303DLM

STMicroelectronics

LSM303DLM by STMicroelectronics is a square-shaped, surface-mountable sensor with a 2.5V nominal voltage. It operates in industrial temperature range (-40 to 85°C) and is commonly used for analog circuit applications.

MS860702BA01-50

Measurement Specialties

ANALOG CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: YES; Width (mm): 3 mm;

1026

TE Connectivity

Other Semiconductors;

C25

Emco High Voltage

Other Semiconductors; Temperature Grade: COMMERCIAL; No. of Terminals: 5; Maximum Input Voltage: 16 V; Maximum Output Current: .0004 A; Package Body Material: METAL;

XTR117AIDRBRG4

Texas Instruments

XTR117AIDRBRG4 by Texas Instruments is an 8-terminal IC with a supply voltage range of 7.5V to 40V, suitable for automotive applications. It operates b/w -40°C to 125°C, featuring a small outline package style and surface mount capability. The technology used is bipolar with a max supply current of 0.25mA.