Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
1,765	$1.174	$2,072.463

TPS2H160AQPWPRQ1

Manufacturer

Texas Instruments
Manufacturer's Part Number

TPS2H160AQPWPRQ1
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

1765 In Stock

Popular Products

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

BSS138PS,115

Nexperia

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

SMBJ18CA

Sensitron Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

2N2222A

New Jersey Semiconductor Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

2N7002

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

BAV99

Gec Plessey Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

STM32H743ZIT6

STMicroelectronics

STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.

Details

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Continental Device India

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

Details

1N4148WT

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

TPS2H160AQPWPRQ1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	13.5 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.2 mm
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Screening Level:	AEC-Q100
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
No. of Channels:	2
Package Code:	TSSOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	4.4 mm
Turn-off Time:	90 us
Moisture Sensitivity Level (MSL):	3
Other Names:	296-44873-1 296-44873-2 296-44873-6 -296-44873-1-ND -296-44873-1
High Side Driver:	YES
Maximum Supply Voltage:	40 V
Turn-on Time:	90 us
Nominal Output Peak Current Limit:	2.5 A
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Output Current Flow Direction:	SOURCE
Length:	5 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	AUTOMOTIVE

Category Top Products

ST890CDR

STMicroelectronics

ST890CDR by STMicroelectronics is a peripheral driver with 8 terminals, operating voltage range of 2.7-5.5V, and max output current of 1.2A. It features built-in protections against overcurrent and thermal issues, suitable for industrial applications requiring buffer or inverter-based interface ICs with fast turn-on/off times.

DRV8846RGET

Texas Instruments

Texas Instruments DRV8846RGET is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates in industrial temperature range (-40 to 85°C) with a max output current of 2A. Ideal for applications requiring source and sink output current flow direction in a compact chip carrier package.

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

BTS640S2GATMA1

Infineon Technologies

BTS640S2GATMA1 by Infineon is a MOS technology peripheral driver with 6 terminals. It offers built-in protections for over current, over voltage, thermal, and under voltage. With a max supply voltage of 34V and nominal output peak current limit of 19A, it's ideal for applications requiring buffer or inverter based peripheral drivers.

LM3526MX-L/NOPB

National Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

TPS22919DCKT

Texas Instruments

TPS22919DCKT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 1.6V to 5.5V, and output current limit of 3A. It offers built-in protections against transient events, overcurrent, and thermal issues. Ideal for industrial applications requiring a compact thin profile package with sink flow direction.

VND5050AJTR-E

STMicroelectronics

VND5050AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for various applications requiring source output current flow direction. The small outline package style with low profile makes it suitable for compact designs.

BTS70041EPPXUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: TIN; JESD-609 Code: e3;

TPS22925CYPHR

Texas Instruments

TPS22925CYPHR by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 0.65V to 3.6V, and built-in transient protection. It features a compact rectangular package style with very thin profile and fine pitch, suitable for industrial applications requiring source and sink current flow control.

BSP78HUMA1

Infineon Technologies

BSP78HUMA1 by Infineon Technologies is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates in industrial temperature range (-40 to 85 °C) with a nominal voltage of 12V. With a small outline package style, it is ideal for applications requiring a sink output current flow direction and turn-on/off time of 100 us.

TDE1708DFT

STMicroelectronics

STMicroelectronics' TDE1708DFT is a peripheral driver with 48V max supply voltage, 24V power supplies, and 0.3A max output current. Ideal for buffer or inverter-based applications, it offers transient and thermal protections, operates b/w -25 to 85 °C, and has a small outline package style.

FPF2101

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

L293DWP

Texas Instruments

L293DWP by Texas Instruments is a peripheral driver with 2 functions, operating at 5V nominal voltage. It offers built-in transient and thermal protections, supporting a max supply voltage of 36V. Ideal for applications requiring source and sink output current flow direction in commercial temperature grade environments.

BTT60101ERBXUMA1

Infineon Technologies

BTT60101ERBXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a max supply voltage of 36V and nominal output peak current limit of 9A. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics due to AEC-Q100 screening level.

ULN2004ADRG3

Texas Instruments

ULN2004ADRG3 by Texas Instruments is a 7-function peripheral driver with built-in transient protection. It operates b/w -20 to 70°C, with a max supply voltage of 8V and current of 1.35mA. Ideal for applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.

TPS274160BRLHR

Texas Instruments

TPS274160BRLHR by Texas Instruments is a peripheral driver with 4 functions, operating at 5-36V. It offers built-in protections for transient, over current, thermal, and under voltage conditions. Ideal for automotive applications due to its high side driver and standard input characteristics.

IRS44262SPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

NCP45520IMNTWG-H

Onsemi

NCP45520IMNTWG-H by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage. It has a small outline package style suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.

NCV8405ASTT1G

Onsemi

NCV8405ASTT1G by Onsemi is a small outline peripheral driver with AEC-Q100 screening for automotive applications. It features built-in protections against transient, over current, and over voltage conditions. With a nominal output peak current limit of 10.5A and sink flow direction, it is ideal for buffer or inverter based interface ICs.

VNI2140JTR

STMicroelectronics

VNI2140JTR by STMicroelectronics is a peripheral driver with 12 terminals, operating voltage range of 9-36 V, and built-in protections for transient, thermal, and under voltage. It is designed for automotive applications with a max output current of 0.5 A and interface IC type as buffer or inverter based peripheral driver.