Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
3,731	$0.450	$1,680.069

TPS22810DRVR

Manufacturer

Texas Instruments
Manufacturer's Part Number

TPS22810DRVR
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: VSON; Package Shape: SQUARE;
Datasheet

Datasheet

3731 In Stock

Popular Products

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

B340A-13-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

2N2222A

Comset Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

TE Connectivity

TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.

Details

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NE555D

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N7002

Kec

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

2N7002

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;

Details

BSS138

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;

Details

LM358N

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

TPS22810DRVR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	2.7 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	.8 mm
Maximum Output Current:	2 A
Surface Mount:	YES
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	6
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, VERY THIN PROFILE
JESD-30 Code:	S-PDSO-N6
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Built-in Protections:	TRANSIENT; THERMAL; UNDER VOLTAGE
Maximum Operating Temperature:	105 Cel
No. of Channels:	1
Package Code:	VSON
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	2 mm
Moisture Sensitivity Level (MSL):	1
Other Names:	296-47868-6 TPS22810DRVR-ND 296-47868-2 296-47868-1
Input Characteristics:	STANDARD
Driver No. of Bits:	1
Maximum Supply Voltage:	18 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Output Current Flow Direction:	SINK
Length:	2 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

ITS42008SBDAUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; JESD-609 Code: e3;

ULQ2003D1013TR

STMicroelectronics

ULQ2003D1013TR by STMicroelectronics is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40°C to 105°C, has a nominal output peak current limit of 0.5A, and uses bipolar technology. Ideal for applications requiring inverted output polarity and sink current flow direction.

BSP742T

Infineon Technologies

BSP742T by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline MOS technology driver is commonly used as a buffer or inverter based peripheral driver in various applications.

TPIC6273DWRG4

Texas Instruments

TPIC6273DWRG4 by Texas Instruments is a latch-based peripheral driver with 8 channels, 2A output peak current limit, and inverted output polarity. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in transient protections. Ideal for applications requiring open-drain outputs such as automotive electronics.

BTS70082EPAXUMA1

Infineon Technologies

BTS70082EPAXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 18V and has a turn-on time of 110us. This small outline package is ideal for automotive applications requiring high output peak current limits up to 7.5A.

VN820-B5TR-E

STMicroelectronics

STMicroelectronics' VN820-B5TR-E is a MOS technology-based peripheral driver with 1 function, capable of handling up to 9A output current. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. Ideal for applications requiring a source flow direction and a supply voltage range of 8-36V in compact designs.

VND14NV04-1-E

STMicroelectronics

VND14NV04-1-E by STMicroelectronics is a 3-terminal peripheral driver with built-in protections against transient, over current, and over voltage. It has a max output peak current limit of 18A and turn-on time of 4.5µs. Ideal for applications requiring buffer or inverter based interface ICs in compact spaces due to its small dimensions (6.5mm x 2.4mm x 6.1mm).

ULN2003AD16-U

Diodes Incorporated

Diodes Incorporated's ULN2003AD16-U is a 7-bit buffer/inverter-based peripheral driver with open-collector output. It operates b/w -40°C to 105°C, handles up to 13V supply voltage, and has built-in transient protection. Ideal for applications requiring sink current flow direction in compact designs.

DS2482S-100+

Analog Devices

DS2482S-100+ by Analog Devices is a peripheral driver with 8 terminals and Schmitt trigger input. It operates b/w -40 to 85 °C, with a supply voltage range of 2.9V to 5.5V. Ideal for industrial applications requiring true output polarity and open-drain output characteristics.

A2982SLW

Allegro MicroSystems

Allegro MicroSystems' A2982SLW is a small outline peripheral driver with 8 functions, operating at -20 to 85°C. It has a max output current of 0.35A and built-in transient protection, suitable for buffer or inverter applications requiring a supply voltage range of 5-50V.

IRS21850SPBF

Infineon Technologies

IRS21850SPBF by Infineon is a CMOS peripheral driver with 8 terminals in a small outline package. It operates b/w -40 to 125 °C and has built-in transient and under voltage protections. Ideal for automotive applications, it features a max supply voltage of 20 V and turn-on/off time of 0.21 us.

TPS27082LDDCR

Texas Instruments

TPS27082LDDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V and a max output current of 3A. It is commonly used in automotive applications for its built-in transient protection and open-drain output characteristics.

IRS21844STRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

IRS21531DSPBF

Infineon Technologies

IRS21531DSPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals. It operates b/w -40 to 125 °C and has built-in under voltage protection. With a supply voltage range of 10.1V to 15.4V, it is ideal for automotive applications requiring source and sink output current flow direction.

LM3525MX-H/NOPB

National Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ADP195ACPZ-R7

Analog Devices

ADP195ACPZ-R7 by Analog Devices is a peripheral driver with 6 terminals, operating voltage range of 1.1V to 3.6V, and industrial temperature grade up to 85°C. It features a small outline package style suitable for buffer or inverter-based applications requiring source current flow direction. The device is designed for surface mount assembly with a compact square shape and very thin profile, making it ideal for space-constrained electronic designs.

VN808-32-E

STMicroelectronics

STMicroelectronics' VN808-32-E is a peripheral driver with 8 functions, operating at supply voltages of 10.5V to 32V. This automotive-grade device offers built-in protections against transient, thermal, and under-voltage issues. With a max output current of 0.5A, it is suitable for various applications requiring source flow direction control in compact spaces.

ISP762TFUMA1

Infineon Technologies

ISP762TFUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 34V and built-in transient protection. It has 8 terminals, operates b/w -30°C to 85°C, and offers an output peak current limit of 8.5A. Ideal for applications requiring buffer or inverter-based peripheral drivers in commercial extended temperature environments.

VNQ660SP

STMicroelectronics

VNQ660SP by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max output current of 6A and turn-on time of 70μs. Ideal for applications requiring high-current switching in automotive systems.

VND14NV04-E

STMicroelectronics

VND14NV04-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It has 2 terminals in a small outline package style with Gull Wing terminal form. Ideal for applications requiring an interface IC type of buffer or inverter based peripheral driver.