Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

IRS21850SPBF

Manufacturer

Infineon Technologies
Manufacturer's Part Number

IRS21850SPBF
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

1N4148

Capar Components

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;

Details

ABS25-32.768KHZ-1-T

Abracon

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Transistor & Electronic

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WS

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;

Details

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

Details

BAV99

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Fairchild Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Unisonic Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;

Details

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Tt Electronics Plc

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;

Details

LM358MX

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

1N4148

Frontier Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Plessey Semiconductors Discrete Components Div

Other Transistors;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

DP83848IVVX/NOPB

National Semiconductor

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;

Details

IRS21850SPBF Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	10 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	15 V
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	3.9 mm
Turn-off Time:	.21 us
Moisture Sensitivity Level (MSL):	2
Maximum Supply Voltage:	20 V
Turn-on Time:	.21 us
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Output Current Flow Direction:	SINK
Length:	4.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE

Category Top Products

ISP762TFUMA1

Infineon Technologies

ISP762TFUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 34V and built-in transient protection. It has 8 terminals, operates b/w -30°C to 85°C, and offers an output peak current limit of 8.5A. Ideal for applications requiring buffer or inverter-based peripheral drivers in commercial extended temperature environments.

L293DN

Unitrode

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V; Output Current Flow Direction: SOURCE AND SINK;

TPS1H100BQPWPRQ1

Texas Instruments

TPS1H100BQPWPRQ1 by Texas Instruments is a high side driver with built-in protections for transient, over current, thermal, and under voltage. It operates at a max supply voltage of 40V and has a nominal output peak current limit of 7A. Ideal for automotive applications due to its AEC-Q100 screening level and compact rectangular package design.

MIC2076-1YM

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

AUIPS6041GTR

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

MAX845ESA+T

Maxim Integrated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

IRS2110SPBF

Infineon Technologies

IRS2110SPBF by Infineon Technologies is a 16-terminal peripheral driver with built-in transient and under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications due to its small outline package and CMOS technology.

UDN2987LWTR

Allegro MicroSystems

Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.

VNS1NV04DP-E

STMicroelectronics

VNS1NV04DP-E by STMicroelectronics is an 8-terminal peripheral driver with a small outline package and gull wing terminals. It operates as a sink type buffer or inverter, handling a max output current of 30s at 240°C peak reflow temperature. Ideal for applications requiring surface mountable drivers in plastic/epoxy packages.

BSP742T

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;

L6203

STMicroelectronics

STMicroelectronics L6203 is a full bridge peripheral driver with 48V max supply voltage, built-in transient and thermal protections. Ideal for applications requiring source and sink output current flow direction, it features 11 terminals in a rectangular package style with through-hole terminal form.

ULN2004A

Vishay Intertechnology

Vishay Intertechnology's ULN2004A is a 7-bit buffer/inverter peripheral driver with open-collector output and sink current flow direction. It operates at -20 to 85°C, with a max supply voltage of 8V and max supply current of 1.45mA. Ideal for applications requiring transient protection in compact spaces due to its small form factor (19.3mm x 7.62mm x 5.08mm).

TLE6240GP

Infineon Technologies

TLE6240GP by Infineon Technologies is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, over voltage, and thermal issues. It is commonly used as a buffer or inverter based peripheral driver in various applications.

ULQ2003D1013TRY

STMicroelectronics

STMicroelectronics ULQ2003D1013TRY is a 16-terminal peripheral driver with open-collector output, suitable for applications requiring inverted polarity. It operates b/w -40 to 105 °C and has a nominal voltage of 50V. With built-in transient protection, this small outline package driver is ideal for buffer or inverter-based interface ICs.

L293D

STMicroelectronics

L293D by STMicroelectronics is a peripheral driver with 2 functions, operating at a max supply voltage of 36V. It features built-in transient and thermal protections, suitable for applications requiring true output polarity and standard input characteristics. With a nominal output peak current limit of 1.2A, this half bridge-based peripheral driver is ideal for various electronic projects.

ITS42008SBDAUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; JESD-609 Code: e3;

UDN2987LWTR-6

Allegro MicroSystems

Allegro MicroSystems' UDN2987LWTR-6 is a bipolar technology peripheral driver with 8 bits. It has a max output current of 0.35 A and operates b/w -20 to 85°C. Ideal for applications requiring small outline surface mount packages.

BTS117BKSA1

Infineon Technologies

BTS117BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 3 terminals, a nominal output peak current limit of 25A, and turn-on time of 70 us. This rectangular package style flange mount device is ideal for applications requiring sink output current flow direction.

IMP803LG

Imp

IMP803LG by Imp is a CMOS peripheral driver with 8 terminals, operating b/w -40 to 85 °C. It has a supply voltage range of 2-6.5 V and supports half bridge based applications with source/sink current flow direction. Ideal for industrial use due to its small outline package style.

BTS3405GXUMA1

Infineon Technologies

BTS3405GXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over voltage, and thermal conditions. It has 8 terminals in a small outline package style, with a nominal voltage of 12V and a max seated height of 1.75mm. This interface IC type is suitable for buffer or inverter based applications requiring a turn-on time of 38us and turn-off time of 45us.