Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

8-33465-2

Manufacturer

TE Connectivity
Manufacturer's Part Number

8-33465-2
Description

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 15 mm2; Terminal Gender: FEMALE; Safety Approval: UL; No. of Ways: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

BAV99

Electronic Devices

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

BAV99

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

ULN2003ADR

Texas Instruments

ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.

Details

SMBJ18CA

Diodes Incorporated

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

1N4148WS

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317LMX/NOPB

Texas Instruments

LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.

Details

2N2222A

Motorola

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;

Details

M85049/85-08W02

Amphenol

CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;

Details

LM358AN

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;

Details

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

DS18B20Z

Maxim Integrated

DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.

Details

8-33465-2 Technical Details

TYPE	DESCRIPTION
Other Names:	8-33465-2-ND 2266-8-33465-2 A136762
Total Ways:	1
Wire Cross Section:	15 mm²
Terminal Gender:	Female
Product Type:	Ring Terminal
Safety Compliance:	UL
Wire Gauge:	6 AWG

Category Top Products

D-436-37CS391

TE Connectivity

WIRE TERMINAL; Wire Gauge: 16 AWG; Safety Approval: UL; Wire Cross Section: 1.21 mm2;

1-796634-2

TE Connectivity

TE Connectivity 1-796634-2 is a UL-approved strip terminal block with 12 ways, rated for 15A current and 300V voltage. It accommodates 12 AWG wire gauge with a cross-section of 3mm², mounted via screws on cables. Ideal for various applications requiring secure electrical connections.

1217754-1

Tyco Electronics Amp

TAB TERMINAL; Manufacturer Series: 1217754; Terminal Gender: MALE;

MC1.52-ST-3.81

Phoenix Contact

The Phoenix Contact MC1.52-ST-3.81 is a 2-way barrier strip terminal block with a rated voltage of 160V and current of 8A, suitable for 16 AWG wires with a cross section of 1.5mm². It features screw fastening and safety approvals from CB, CSA, CUL, EAC, UL, and VDE. Ideal for secure electrical connections in various applications requiring reliable wire termination solutions.

34130

TE Connectivity

BUTT TERMINAL; Wire Gauge: 16 AWG; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: 1.42 mm2;

52422-1

TE Connectivity

TE Connectivity's 52422-1 is a UL-approved FORK TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm2, it is designed for FEMALE terminals in various applications.

1SNK705062R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 2.5 mm2;

DRA1-CMXE100D10

Crydom

The Crydom DRA1-CMXE100D10 is a modular terminal block with 4 ways and a rated voltage of 100V. It is mounted on DIN rail and has a fastening method using screws. With a safety approval from CE and UL, it is suitable for various applications in the field of terminals and terminal blocks.

2060-402/998-404

Wago

Wago's 2060-402/998-404 is a BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It has a rated voltage of 320V, current of 9A, and supports wire gauge up to 18 AWG. Ideal for applications requiring secure electrical connections in limited space.

1SNK510150R0000

TE Connectivity

TE Connectivity's 1SNK510150R0000 is a DIN RAIL mounted modular terminal block with UL safety approval. It supports wire gauge up to 4 AWG and wire cross section of 16 mm2. Ideal for various applications requiring a single way connection.

3044157

Phoenix Contact

Phoenix Contact 3044157 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 2 rows and ways. It supports wire gauge up to 8 AWG and wire cross section of 10 mm2. Safety approved by CSA, UL, VDE, it's ideal for industrial control applications.

39421-0002

Molex

Molex 39421-0002 is a modular terminal block with 3 AWG wire gauge, rated for 600V and 85A current. It has a wire cross section of 21.2 mm² and fastens with screws. Ideal for applications requiring a reliable connection in cable mounting setups.

282837-2

TE Connectivity

TE Connectivity's 282837-2 is a modular terminal block with 16 AWG wire gauge, rated at 300V and 13.5A current. It has UL safety approval and uses screw fastening method for board mounting applications.

MS25036-154

Defense Logistics Agency

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2 mm2;

MS25036-108

TE Connectivity

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.08 mm2; Safety Approval: CSA; MIL; UL;

320568

TE Connectivity

TE Connectivity 320568 is a UL-approved RING TERMINAL with a wire gauge of 10 AWG and rated voltage of 300 V. It is suitable for use in terminals & terminal blocks, offering a wire cross section of 6 mm2 and one-way connection.

63130-2

Tyco Electronics Amp

SPLICE TERMINAL; Terminal Gender: FEMALE;

1966130

Phoenix Contact

The Phoenix Contact 1966130 is a UL-approved barrier strip terminal block with 6 ways and rated for 8A current at 160V. Featuring spring-loaded fastening, it accommodates wire gauge up to 16 AWG (1.5 mm2) and is ideal for connector mounting applications.

9-160481-1

Tyco Electronics Amp

PUSH-ON TERMINAL; Additional Features: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 1.5 mm2;

9-160481-1

TE Connectivity

TE Connectivity 9-160481-1 is a female PUSH-ON TERMINAL with UL approval for 16 AWG wire, rated at 300V. Ideal for applications requiring secure connections with 1.5 mm2 wire cross section in terminals and terminal blocks.