Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

796644-2

Manufacturer

TE Connectivity
Manufacturer's Part Number

796644-2
Description

STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: UL 94V-0, POLYAMIDE66; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;
Datasheet

Datasheet

Not In Stock

Popular Products

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Concord Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

LM317T

Analog Devices

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

MBRS130LT3G

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;

Details

ULN2803ADWG4

Texas Instruments

ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

EU2B-YS3203C

Idec

ROTARY SWITCH;

Details

2N7002

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;

Details

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

1N4148WS

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Tt Electronics Plc

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;

Details

796644-2 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Total Ways:	2
Wire Cross Section:	3 mm²
Product Type:	Strip Terminal Block
Safety Compliance:	UL
Additional Features:	Standard: UL 94V-0, PA66
Total Rows:	1
Fastening Style:	Connector
Rated Current:	15 A
Wire Gauge:	12 AWG
Total Decks:	1
Rated Voltage:	300 V

Category Top Products

1SNK705010R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Current (Rated): 20 A; No. of Ways: 1;

282834-6

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Decks: 1;

4513-5

Winchester Interconnect

PCB TERMINAL; Manufacturer Series: 4513; Terminal Gender: MALE;

2-320563-2

TE Connectivity

TE Connectivity 2-320563-2 is a UL-approved RING TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm2, it's ideal for female terminals in various applications.

D-436-36CS2881

TE Connectivity

WIRE TERMINAL; Wire Gauge: 20 AWG; Safety Approval: UL; Wire Cross Section: .61 mm2;

33465

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 16.8 mm2; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: UL;

8-31894-1

TE Connectivity

TE Connectivity 8-31894-1 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire, rated at 300V. With a wire cross section of 1.42 mm2, it's ideal for various applications in Terminals & Terminal Blocks category.

1935174

Phoenix Contact

The Phoenix Contact 1935174 is a UL-approved BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports wire gauge up to 14 AWG with a rated voltage of 250V and current of 17.5A, suitable for applications requiring secure connections in industrial control systems.

3967

Vogt Ag Verbindungstechnik

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;

D-436-37CS2881

TE Connectivity

WIRE TERMINAL; Wire Gauge: 16 AWG; Wire Cross Section: 1.21 mm2; Safety Approval: UL;

624

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: POLYAMIDE; Wire Gauge: 8 AWG; Voltage (Rated): 300 V;

1-320551-1

TE Connectivity

TE Connectivity 1-320551-1 is a UL-approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for applications requiring secure electrical connections in terminals & terminal blocks.

38770-0112

Molex

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 24; No. of Rows: 2;

282834-3

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Decks: 1;

3101113

Phoenix Contact

The Phoenix Contact 3101113 is a modular terminal block with G RAIL mounting. It has a rated voltage of 400V and can handle wire gauge up to 12 AWG. With CSA and UL safety approvals, it is ideal for applications requiring a current rating of 10A across 4 ways and 2 decks.

PMNF1-3R-M

Panduit

RING TERMINAL; Wire Cross Section: 1.5 mm2; Manufacturer Series: PMNF1;

MS25036-106

Amphenol Communications Solutions

FORK TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2 mm2;

YAEV8C-L1

Burndy

RING TERMINAL; Manufacturer Series: YAEV-L;

1-1776263-5

Tyco Electronics Amp

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, POLYAMIDE/ POLYESTER; Wire Gauge: 16 AWG; Voltage (Rated): 300 V;

221-415/K194-4045

Wago

Wago 221-415/K194-4045 is a UL-approved barrier strip terminal block with 5 ways, rated for 32A current and 450V voltage. It supports wire gauge up to 12 AWG and wire cross-section of 4mm2, featuring a push-in fastening method. Ideal for cable mounting applications in various industries.