Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

2-2141598-2

Manufacturer

TE Connectivity
Manufacturer's Part Number

2-2141598-2
Description

TAB TERMINAL; Wire Gauge: 13 AWG; Wire Cross Section: 2.5 mm2; Terminal Gender: MALE; Current (Rated): 30 A; Safety Approval: UL;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

LM358DT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USBLC6-2SC6

STMicroelectronics

USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.

Details

BAV99

Vishay Intertechnology

Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

BAV99

Philips Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Zowie Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

1N4148

Rochester Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Micro Commercial Components

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;

Details

2-2141598-2 Technical Details

TYPE	DESCRIPTION
Other Names:	-2-2141598-2-CSI 17-2-2141598-2CT 17-2-2141598-2DKR 17-2-2141598-2TR -2-2141598-2-LSI 17-2-2141598-2DKR-ND 17-2-2141598-2DKRINACTIVE
Wire Cross Section:	2.5 mm²
Terminal Gender:	Male
Product Type:	Tab Terminal
Safety Compliance:	UL
Rated Current:	30 A
Wire Gauge:	13 AWG

Category Top Products

61866-1

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 6 AWG; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 15 mm2; Terminal Gender: FEMALE;

807

Keystone Electronics

WIRE TERMINAL;

1714968

Phoenix Contact

Phoenix Contact 1714968 is a UL-approved barrier strip terminal block for boards. It supports wire gauge up to 10 AWG with 4 mm2 wire cross section and rated voltage of 500V. With fastening by screws, it has a current rating of 32A and offers 3 ways for secure connections in various applications.

1-770904-1

Tyco Electronics Amp

WIRE TERMINAL; Wire Gauge: 22 AWG; Terminal Gender: FEMALE; Manufacturer Series: 770904; Wire Cross Section: .9 mm2;

1531360000

Weidmueller & Kg

BARRIER STRIP TERMINAL BLOCK;

51864-1

TE Connectivity

TE Connectivity's 51864-1 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Its wire cross section is 2.08 mm2, making it ideal for various electrical applications requiring secure connections and reliable performance.

1733570

Phoenix Contact

Phoenix Contact 1733570 is a UL-approved BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports wire gauge up to 14 AWG with rated voltage of 250V and current of 17.5A. Ideal for applications requiring secure electrical connections in industrial settings.

19002-0005

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Wire Cross Section: .8 mm2;

1703661

Phoenix Contact

The Phoenix Contact 1703661 is a PANEL-mount BARRIER STRIP TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 6 AWG and voltage rating of 1000 V, making it ideal for high-current applications requiring secure connections. With a rated current of 76 A and 7 ways, it accommodates wire cross sections up to 16 mm2 efficiently.

41480

Tyco Electronics Amp

TAB TERMINAL; Terminal Gender: MALE; Manufacturer Series: 41480;

64321-2011

Molex

FORK TERMINAL; Manufacturer Series: 64321;

1803277

Phoenix Contact

Phoenix Contact 1803277 is a BOARD-mounted BARRIER STRIP TERMINAL BLOCK with 160V rated voltage and 8A rated current. It has CB, CSA, CUL, GOST, UL, VDE safety approvals. Ideal for applications requiring secure electrical connections in limited space.

MS25036-156

Amphenol Communications Solutions

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 6 mm2; No. of Ways: 1;

51863-2

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 22 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: .38 mm2;

MS-25036-108

Molex

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 600 V; Wire Cross Section: 2.08 mm2; Safety Approval: CSA; MIL; UL;

PMNF1-3R-M

Panduit

RING TERMINAL; Wire Cross Section: 1.5 mm2; Manufacturer Series: PMNF1;

2-33457-2

TE Connectivity

RING TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;

1SNK705062R0000

TE Connectivity

TE Connectivity's 1SNK705062R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 12 AWG and rated voltage of 600V, suitable for applications requiring 20A current with wire cross section of 2.5 mm2.

1843606

Phoenix Contact

The Phoenix Contact 1843606 is a UL-approved BARRIER STRIP TERMINAL BLOCK with 160V rated voltage and 8A current. It features a BOARD mounting type and CONNECTOR fastening method, suitable for applications requiring secure electrical connections in limited space environments.

2-36160-1

TE Connectivity

RING TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; Safety Approval: UL; No. of Ways: 1;