Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

172777-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

172777-1
Description

TAB TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: MALE; Safety Approval: UL; Wire Cross Section: 2 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Daco Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358N

Kec

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Inchange Semiconductor

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

0462-201-16141

TE Connectivity

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

Details

1N4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

1N4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

SS14

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

Details

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

Details

BAV99

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

172777-1 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	2 mm²
Terminal Gender:	Male
Product Type:	Tab Terminal
Safety Compliance:	UL
Wire Gauge:	14 AWG

Category Top Products

41480

Tyco Electronics Amp

TAB TERMINAL; Terminal Gender: MALE; Manufacturer Series: 41480;

1776508

Phoenix Contact

Phoenix Contact 1776508 is a STRIP TERMINAL BLOCK with 2.5 mm2 Wire Cross Section and 13 AWG Wire Gauge. Rated for 320V voltage and 12A current, it's ideal for BOARD mounting applications requiring CB, CCA, CSA, CUL, EAC, GL, RS safety approvals.

8197

Keystone Electronics

POWER TERMINAL; Additional Features: BRASS;

172777-1

TE Connectivity

TAB TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: MALE; Safety Approval: UL; Wire Cross Section: 2 mm2;

2005-7645

Wago

MODULAR TERMINAL BLOCK;

282837-2

TE Connectivity

TE Connectivity's 282837-2 is a modular terminal block with 16 AWG wire gauge, rated at 300V and 13.5A current. It has UL safety approval and uses screw fastening method for board mounting applications.

680

Keystone Electronics

LUG TERMINAL;

MS25036-153

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.08 mm2; Safety Approval: UL;

MS25036-148

Defense Logistics Agency

RING TERMINAL; Additional Features: COPPER; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; Terminal Gender: FEMALE;

MSTBA2,5/3-G-5,08

Phoenix Contact

Phoenix Contact's MSTBA2,5/3-G-5,08 is a 3-way strip terminal block with 12A current rating and 320V voltage. It features CB, CCA, CSA, CUL, EAC, UL safety approvals and board mounting. Ideal for applications requiring secure connector fastening in various industries.

1-726386-2

TE Connectivity

TAB TERMINAL; Safety Approval: UL; Terminal Gender: MALE;

19017-0005

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Manufacturer Series: 19017; Wire Cross Section: .8 mm2;

MSTB2,5/4-ST-5,08

Phoenix Contact

Phoenix Contact's MSTB2,5/4-ST-5,08 is a 4-way barrier strip terminal block with 2.5mm² wire cross section and 12A rated current. It is approved by CB, CSA, CUL, EAC, UL, VDE for safety and rated at 320V voltage. Ideal for board mounting applications with screw fastening method supporting up to 12 AWG wire gauge.

221-412/VE00-2500

Wago

Wago 221-412/VE00-2500 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 20A current and 600V voltage. It supports wire gauge up to 12 AWG and wire cross section of 4 mm2. Ideal for CABLE mounting applications with safety approvals from ABS, CUL, EN/EC, PSE, and UL.

MKDSN-1.5/3-5.08

Phoenix Contact

The Phoenix Contact MKDSN-1.5/3-5.08 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 400V voltage and 13.5A current. It supports wire gauge up to 16 AWG and wire cross section of 1.5mm2, making it ideal for BOARD mounting applications in various industries with safety approvals from CB, CUL, DNVGL, EAC, SEV, and UL.

36160

TE Connectivity

TE Connectivity 36160 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 2.62 mm2, it is ideal for electrical connections in various applications requiring secure and reliable terminal blocks.

34130

Weidmueller & Kg

WIRE TERMINAL;

2091-1104/002-000

Wago

Wago 2091-1104/002-000 is a BARRIER STRIP TERMINAL BLOCK for CABLE mounting. It supports 14 AWG wire gauge with 1.5 mm2 wire cross section and rated voltage of 320V, current of 10A. Ideal for applications requiring secure connections in electrical wiring systems.

1777099

Phoenix Contact

Phoenix Contact 1777099 is a STRIP TERMINAL BLOCK with 4 ways, rated for 12A current and 320V voltage. It has CB, CCA, CSA safety approvals and accepts wire gauge up to 13 AWG. Ideal for BOARD mounting applications requiring secure connections with wire cross section of 2.5 mm2.

2002-2211/1000-410

Wago

MODULAR TERMINAL BLOCK;