Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1060-20-0122

Manufacturer

TE Connectivity
Manufacturer's Part Number

1060-20-0122
Description

CONNECTOR ACCESSORY; Rated Current: 7.5 A; Maximum Cable Entry: .125 inch; Wire Gauge (AWG): 16; Maximum Wire Size: 16 AWG; MIL Conformity: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Infinex

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

SMBJ18CA

Yangzhou Yangjie Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

2N2222A

Comset Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

1N4148

Iskra Semic Capacitors Industry

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

LM317BD2TG

Onsemi

LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N7002-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

MMBT2222ALT1G

Rochester Electronics

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

2N7002

Itt Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;

Details

BAV99

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS3200T3G

Onsemi

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

Details

1060-20-0122 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Other Names:	1734-1146-2 1734-1146-1 -1060-20-0122-SI -1060-20-0122-CSI
Wire Gauge (AWG):	16
Maximum Wire Size:	16 AWG
Minimum Cable Entry:	.075 inch
Contact Design:	STAMPED
Terminal Type:	CRIMP
IEC Conformity:	NO
Minimum Operating Temperature:	-55 Cel
Cross Section Area:	1.3 mm2
Minimum Wire Size:	22 AWG
Design:	POWER
MIL Conformity:	NO
Contact Gender:	MALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CONTACT
Maximum Operating Temperature:	125 Cel
Rated Current:	7.5 A
DIN Conformity:	NO
Maximum Cable Entry:	.125 inch

Category Top Products

CC81L-2426-01-L

Samtec

CC81L-2426-01-L by Samtec is a female contact with crimp terminal type, suitable for ISD2 SERIES HOUSING. It features 10 finish thickness, accommodates wire sizes from 26 AWG to 24 AWG, and has a straight mounting style. Made of beryllium copper, it is ideal for various assembly applications.

205980-1

TE Connectivity

CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: HARDWARE-RETAINING SCREW; Additional Features: INDIVIDUAL KIT; IEC Conformity: NO;

DF3-2428SCFC

Hirose Electric

DF3-2428SCFC by Hirose Electric is a female contact with bellowed design, made of phosphor bronze. It has a finish thickness of 7.9 and terminal length of 0.108". Ideal for straight mounting applications in assembly products.

5748676-1

TE Connectivity

TE Connectivity 5748676-1 is a zinc alloy BACKSHELL with shielding, suitable for PLUG/RECEPTACLE applications. It supports cable entry from 0.185" to 0.32", operating in temperatures from -55°C to 105°C. Mounting options include #4-40 screws and it accommodates up to 0 AWG wire size.

C88E000209M3S

Northern Technologies

CONNECTOR ACCESSORY; IEC Conformity: NO; Material: ZINC ALLOY; MIL Conformity: NO; Usage: CM CONNECTOR; Mounting Option-1: M3;

AWM-2P

Amphenol

CONNECTOR ACCESSORY;

DF60-1012SCFA

Hirose Electric

CONNECTOR ACCESSORY;

1SNK900103R0000

Abb

TERMINAL BLOCK ACCESSORY; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;

SSH-003GA-P0.2

J S T Mfg

SSH-003GA-P0.2 by J S T Mfg is a CRIMP terminal with contact design of STRIP OR LOOSE, suitable for 28-32 AWG wires. It has a rated current of 1A and can handle temperatures from -25 to 85 °C. Ideal for applications requiring FEMALE contacts with bellowed contact style in assembly products.

5212

Keystone Electronics

CONNECTOR ACCESSORY; Assembly Item Name: BATTERY CONTACT; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Material: STEEL;

HM2DK1256RLF

AMPHENOL ICC

CONNECTOR ACCESSORY; Assembly Item Name: CODING ITEM; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO;

5040520098

Molex

Molex 5040520098 CONTACT features CRIMP terminal type for 28-24 AWG wires. Rated for 150V AC/DC, 3A current, it's ideal for POWER AND SIGNAL applications with FEMALE contact gender and 0.071-0.043 inch cable entry.

WM-3S

TE Connectivity

The TE Connectivity WM-3S is an assembly product designed for DTM SERIES applications. It features a temperature range of -55 to 125°C, suitable for power and signal designs. With a max wire size of 0 AWG and made from polybutylene terephthalate, it is ideal for various electrical connections.

RM16M23K

Souriau-sunbank Connection Technologies

RM16M23K by Souriau-sunbank Connection Technologies is a male contact with 3mohm resistance, designed for signal applications. It has a rated current of 13A and accepts wire sizes ranging from 20-16 AWG. Ideal for crimp terminals in assembly products.

08-52-0071

Molex

Molex 08-52-0071 is a CRIMP terminal with PHOSPHOR BRONZE material. It supports wire sizes from 24 AWG to 18 AWG and has a finish thickness of 100. Ideal for applications in various SERIES HOUSING models with 0.11" to 0.118" cable entry.

33011-3002

Molex

CONNECTOR ACCESSORY;

1-66100-9

TE Connectivity

TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.

770854-3

TE Connectivity

TE Connectivity's 770854-3 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 16 AWG and rated current of 17 A, it is ideal for applications requiring female gender contacts with round pin-socket style in straight mounting.

2411-001-2405

TE Connectivity

TE Connectivity 2411-001-2405 nut item for HDP Series Size 24 assemblies. Features include max operating temp of 125°C, min operating temp of -55°C, and contact gender female. Ideal for use with 0 AWG wire due to glass-filled PEI material.

209-120

Wago

TERMINAL BLOCK ACCESSORY; Assembly Item Name: MOUNTING ITEM; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;