Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

0460-204-12141

Manufacturer

TE Connectivity
Manufacturer's Part Number

0460-204-12141
Description

CONNECTOR ACCESSORY; Rated Current: 25 A; Mounting Style: STRAIGHT; Minimum Operating Temperature: -55 Cel; Cross Section Area: 3.31 mm2; Contact Design: MACHINED;
Datasheet

Datasheet

Not In Stock

Popular Products

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

1N4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Boca Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358AN

Texas Instruments

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

Details

2N2222A

Taitron Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

LM555CN

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

87832-1420

Molex

87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

Intersil

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS340T3G

Onsemi

MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.

Details

1N4148WSF-7

Diodes Incorporated

1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

1N4148WS

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

0460-204-12141 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Wire Gauge (AWG):	12
Maximum Wire Size:	12 AWG
Contact Design:	MACHINED
Contact Style:	RND PIN-SKT
Terminal Type:	CRIMP
IEC Conformity:	NO
Material:	PHOSPHOR BRONZE
Minimum Operating Temperature:	-55 Cel
Cross Section Area:	3.31 mm2
Minimum Wire Size:	14 AWG
MIL Conformity:	NO
Contact Gender:	MALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CONTACT
Maximum Operating Temperature:	125 Cel
Rated Current:	25 A
DIN Conformity:	NO

Category Top Products

3003

Keystone Electronics

CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Additional Features: LOW PROFILE; MIL Conformity: NO; Terminal Type: SOLDER;

1658670-1

TE Connectivity

TE Connectivity's 1658670-1, a male signal contact assembly product for AMPLIMITE, features crimp terminals suitable for wire gauges from 28 to 22 AWG. With a finish thickness of 30 and operating temperatures ranging from -55°C to 105°C, it can handle currents up to 1.9A efficiently.

502579-0000

Molex

The Molex 502579-0000 is a male compression contact designed for signal applications. It has a rated current of 2A and can accommodate wire sizes from 24 to 28 AWG. This assembly product is commonly used with the 502578 housing for crimp terminals with a min cable entry of 0.031 inch.

AT62-201-20141

Amphenol

CONNECTOR ACCESSORY;

1534805-1

TE Connectivity

TE Connectivity's 1534805-1 BACKSHELL features steel material with shielding, 0.189" min cable entry, and 0.354" max cable entry. Ideal for applications requiring secure mounting with screws and accommodating up to 0 AWG wire sizes.

39-00-0079

Molex

Molex 39-00-0079 is a crimp terminal with square pin-socket contact design. It supports up to 16 AWG wire size and 0.122" cable entry, ideal for 5557, 30067, 42474, and 44516 series housing applications. Made of phosphor bronze with a finish thickness of 35, it features female contact gender and straight mounting style.

W6S-P012

TE Connectivity

TE Connectivity's W6S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. It supports wire sizes up to 0 AWG, with operating temperatures ranging from -55°C to 125°C. Made of POLYBUTYLENE TEREPHTHALATE, it ensures reliable connections in various applications.

282081-1

TE Connectivity

TE Connectivity 282081-1 is a SEALING ITEM for AMP SUPERSEAL 1.5 SERIES CONNECTORS. With a temp range of -40 to 130°C, it uses SILICONE RUBBER material and supports wire sizes up to 0 AWG.

226537-1

TE Connectivity

TE Connectivity 226537-1 CONTACT features TPX insulator, 30 finish thickness, and brass material. Ideal for RD 316, RG 161, RG 174 cables with a max wire size of 0 AWG. Designed for power and signal applications with straight mounting style and male contact gender.

13711546

Aptiv

Aptiv 13711546 CONTACT is a FEMALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assembly due to its precise fit and durable material.

507528200

Molex

Molex 507528200 CONTACT features CRIMP terminals for 22-20 AWG wires, rated at 3.5A and 250V AC/DC. Suitable for applications requiring FEMALE CHAIN contacts with 0.0591-0.0709 inch cable entry, ideal for Assembly Products.

AWP-2S

Amphenol

CONNECTOR ACCESSORY; Usage: ATP06; DIN Conformity: NO; IEC Conformity: NO; Material: POLYETHYLENE; Minimum Operating Temperature: -55 Cel;

12010300

Aptiv

CONNECTOR ACCESSORY;

3200030

Phoenix Contact

TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: FERRULE; DIN Conformity: NO; Maximum Operating Temperature: 105 Cel;

SVH-21T-P1.1

J S T Mfg

SVH-21T-P1.1 by J S T Mfg is a VH series connector with crimp terminal type, rated for 250V AC/DC and 7A current. It has approvals from CSA, TUV, and UL, with operating temperatures ranging from -25°C to 85°C. Ideal for applications requiring a female contact gender and wire sizes b/w 22-18 AWG.

293734-1

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -20 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 85 Cel; Wire Gauge (AWG): 0; Design: POWER;

39-00-0082

Molex

The Molex 39-00-0082 is a contact assembly product with a finish thickness of 35. It is designed for use with the 5559, 30068, and 42475 series housing. This male contact has a crimp terminal type and a square pin-socket contact style, making it suitable for applications requiring a max wire size of 16 AWG.

1731120248

Molex

CONNECTOR ACCESSORY; Usage: FCT D-SUB; DIN Conformity: NO; Mounting Option-2: SCREW; Assembly Item Name: SCREW LOCK; MIL Conformity: NO;

DTM06-12SB-EE04

TE Connectivity

TE Connectivity's DTM06-12SB-EE04 is a FEMALE connector with 7.5A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, operating from -55°C to 150°C. Ideal for POWER AND SIGNAL applications requiring reliable connections in harsh environments.

249-119

Wago

TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKER CARRIER; IEC Conformity: NO;