Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

12124075

Manufacturer

Aptiv
Manufacturer's Part Number

12124075
Description

CONNECTOR ACCESSORY; IEC Conformity: NO; Terminal Length: .224 inch; Minimum Cable Entry: .079 inch; Assembly Item Name: CONTACT; Contact Style: COMPRESSION;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

SMBJ18CA

International Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

BSS138

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ERJ6ENF10R0V

Panasonic

Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0540T1G

Onsemi

MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.

Details

LL4148

Rfe International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Synsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Renesas Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FDLL4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

12124075 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
MIL Conformity:	NO
Minimum Cable Entry:	.079 inch
Contact Style:	COMPRESSION
Terminal Length:	.224 inch
Contact Gender:	FEMALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CONTACT
Terminal Type:	CRIMP
IEC Conformity:	NO
DIN Conformity:	NO
Maximum Cable Entry:	.094 inch

Category Top Products

50079-8000

Molex

The Molex 50079-8000 is an assembly product with a finish thickness of 35, featuring crimp terminal type and chain contact design. It is used with the 51021 housing for female contacts in straight mounting style. The bellowed contact material is made of phosphor bronze, suitable for wire sizes ranging from 28 AWG to 26 AWG.

282081-1

TE Connectivity

TE Connectivity 282081-1 is a SEALING ITEM for AMP SUPERSEAL 1.5 SERIES CONNECTORS. With a temp range of -40 to 130°C, it uses SILICONE RUBBER material and supports wire sizes up to 0 AWG.

500588001

Molex

Molex 500588001 is a UL approved assembly product with crimp terminal type. It has a rated current of 1.5A, contact resistance of 20 mohm, and operating temperature range from -40 to 105 °C. Primarily used for 51021 HOUSING applications due to its FEMALE contact gender and BLADE PIN-SKT design.

226537-1

TE Connectivity

TE Connectivity 226537-1 CONTACT features TPX insulator, 30 finish thickness, and brass material. Ideal for RD 316, RG 161, RG 174 cables with a max wire size of 0 AWG. Designed for power and signal applications with straight mounting style and male contact gender.

108-2

Keystone Electronics

CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: BATTERY CONTACT; MIL Conformity: NO; Terminal Type: SOLDER;

747784-8

TE Connectivity

TE Connectivity 747784-8 is a JACK SCREW for CABLE CONNECTORS. Made of STAINLESS STEEL, it supports up to 0 AWG wire size. Mounting options include #4-40 and SCREW, ideal for various assembly applications.

16-02-0102

Molex

CONNECTOR ACCESSORY;

64322-1019

Molex

Molex 64322-1019 CONTACT features CRIMP terminal type, 0.0492" min cable entry, and 125°C max operating temp. Ideal for use with 64318-21, 64326 assemblies. Female contact made of copper alloy with 8 mohm resistance, suitable for up to 22 AWG wire size and 0.0551" max cable entry.

M23053/5-111-9

Alpha Wire

ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO;

979-009-030R121

Norcomp Interconnect Devices

Norcomp's 979-009-030R121 backshell is a zinc alloy D-SUB connector accessory. It can operate in temperatures ranging from -45°C to 120°C, with a screw mounting option. Ideal for assembly products requiring durable and reliable interconnect solutions.

W2S-P012

TE Connectivity

TE Connectivity's W2S-P012 is a wedge item in the DT Series, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it ensures reliable performance in various assembly projects.

86303637BLF

AMPHENOL ICC

Amphenol Icc's 86303637BLF BACKSHELL is a UL-approved nylon assembly product. It features cable entry ranging from 0.157" to 0.433", with operating temperatures from -40°C to 95°C. Ideal for securing cables in various applications.

205089-1

TE Connectivity

TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.

12124075

Not In Stock

Popular Products

1N4148

IRLML6402TRPBF

SMBJ18CA

BSS138

1N4148

1N4148

261

BSS138NH6327XTSA2

1N4148WT

ERJ6ENF10R0V

LM555CMX

LM107H

BAV99

CRCW04020000Z0ED

SS14

MBR0540T1G

LL4148

1N4148

1N4148

FDLL4148

12124075 Technical Details

Category Top Products

50079-8000

282081-1

500588001

226537-1

108-2

747784-8

16-02-0102

64322-1019

M23053/5-111-9

979-009-030R121

W2S-P012

86303637BLF

205089-1

WM-6P

AT06-12S-CAP

N020606601002

C01600V00001012

2414-001-2486

AT13-204-2005

MHDTZK-9-K