Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

WM-2S

Manufacturer

TE Connectivity
Manufacturer's Part Number

WM-2S
Description

CONNECTOR ACCESSORY; IEC Conformity: NO; Material: POLYBUTYLENE TEREPHTHALATE; Assembly Item Name: WEDGE ITEM; Wire Gauge (AWG): 0; DIN Conformity: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

FDLL4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

Details

BSS138K-13

Diodes Incorporated

BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

SMBJ18CA

Goodwork Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

M24308/2-1F

Itt Cannon

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

WM-2S Technical Details

TYPE	DESCRIPTION
Other Names:	1734-1045 -WM-2S-SI
Wire Gauge (AWG):	0
Usage:	DTM SERIES
Maximum Wire Size:	0 AWG
IEC Conformity:	NO
Material:	POLYBUTYLENE TEREPHTHALATE
Minimum Operating Temperature:	-55 Cel
Design:	POWER AND SIGNAL
MIL Conformity:	NO
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	WEDGE ITEM
Maximum Operating Temperature:	125 Cel
DIN Conformity:	NO

Category Top Products

W8S

TE Connectivity

W8S by TE Connectivity is an assembly product designed for the DT SERIES. It has a max operating temperature of 125°C and a min operating temperature of -55°C. With a max wire size of 0 AWG, it is suitable for power and signal applications using polybutylene terephthalate material.

39-00-0428

Molex

The Molex 39-00-0428 is a power contact assembly product with a crimp terminal type. It is designed for use with 5557, 30067, 44516 or 42474 housing and has a finish thickness of 30. This contact is made of brass and can accommodate wire sizes ranging from 24 AWG to 18 AWG.

SPUD-001T-P0.5

J S T Mfg

SPUD-001T-P0.5 by J S T Mfg is a UL approved CONTACT with CRIMP terminal type, rated for 250V AC/DC, 3A current. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 26-22 AWG and operating temperatures of -25 to 85°C.

56134-9100

Molex

Molex 56134-9100 CONTACT features CRIMP terminal type, 0.0354" min cable entry, and COPPER ALLOY material. Ideal for 51242, 51382, 51353 SERIES applications requiring FEMALE contact gender and SQUARE PIN-SOCKET style. Supports wire sizes from 28 AWG to 22 AWG with 0.067" max cable entry.

M23053/5-106-9

3m Electronic Products Division

ASSEMBLY ITEMS; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO;

MTCB1X-XXX-105

TE Connectivity

CONNECTOR ACCESSORY; Contact Gender: MALE; Maximum Wire Size: 0 AWG;

1062-16-1222

TE Connectivity

TE Connectivity's 1062-16-1222 crimp terminal features stamped contact design, suitable for wire gauge 12 AWG with a cross section area of 3.3 mm². It can handle up to 13A current and operates b/w -55°C to 125°C, making it ideal for various assembly products applications.

DTM06-6S-C017

TE Connectivity

TE Connectivity's DTM06-6S-C017 is a FEMALE contact assembly product with 7.5A rated current and 250V rated DC voltage. It can handle temperatures from -55°C to 125°C, with cable entries ranging from 0.053" to 0.12". Ideal for power and signal applications.

1534805-1

TE Connectivity

TE Connectivity's 1534805-1 BACKSHELL features steel material with shielding, 0.189" min cable entry, and 0.354" max cable entry. Ideal for applications requiring secure mounting with screws and accommodating up to 0 AWG wire sizes.

43030-0009

Molex

The Molex 43030-0009 is a crimp terminal contact with a finish thickness of 30. It is commonly used in assemblies such as 43025, 43645, and 44133. With a rated current of 8.5A, it can accommodate wire sizes ranging from 24 AWG to 20 AWG.

42815-0144

Molex

Molex 42815-0144 is a female contact for Mini Fit connectors. Made of copper alloy, it supports wire sizes from 16 to 14 AWG. With a bellowed type design and straight mounting style, it is ideal for power applications with a finish thickness of 10.

206138-8

TE Connectivity

TE Connectivity's 206138-8 cable clamp has UL approval, shell size of 23, and max wire size of 0 AWG. It is made of polyethylene and mounts straight with a screw option. Ideal for securing cables in various assemblies.

M23053/16-003-0

Sumitomo Electric Industries

ASSEMBLY ITEMS; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN;

3036916

Phoenix Contact

TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): UL; DIN Conformity: NO; Material: COPPER; IEC Conformity: NO;

HR30-SC-211

Hirose Electric

The Hirose Electric HR30-SC-211 CONTACT is a FEMALE connector for 26 AWG wires. It features STRAIGHT mounting style and is made of PHOSPHOR BRONZE. Ideal for assembly products requiring precise wire connections in various applications.

DZ5CE003L6

Schneider Electric Sa

Schneider Electric Sa's DZ5CE003L6 ferrule has NFC approval, operates b/w -20°C to 105°C, and supports up to 24 AWG wire. Ideal for electrical assemblies requiring copper material with precise wire termination in various applications.

13697414

Delphi Connection Systems

CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformity: NO; Material: COPPER ALLOY;

963293-1

TE Connectivity

CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;

08-50-0105

Molex

Molex 08-50-0105 contact features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 2139, 3001, and 3069 assemblies. Suitable for FEMALE contacts with a 0.11 inch cable entry.

5227

Keystone Electronics

CONNECTOR ACCESSORY;