Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
2,649	$0.051	$135.894

43030-0038

Manufacturer

Molex
Manufacturer's Part Number

43030-0038
Description

CONNECTOR ACCESSORY; Manufacturer Series: 43030;
Datasheet

Datasheet

2649 In Stock

Popular Products

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

MMBF170LT1G

Rochester Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;

Details

LL4148

Onsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

CGA3E2X7R1H104K080AA

TDK

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

Details

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z

Maxim Integrated

DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM78L05ACMX/NOPB

Texas Instruments

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

1N4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Changzhou Galaxy Century Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

1N4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

STMicroelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Linear Technology

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.

Details

43030-0038 Technical Details

TYPE	DESCRIPTION
Connector Accessory Type:	CONNECTOR ACCESSORY
Manufacturer Series:	43030

Category Top Products

43030-0008

Molex

Molex 43030-0008 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Ideal for use with 43025/43645/44133 assemblies, it has a 0.138" terminal length and 0.073" cable entry.

DF19A-2830SCFA

Hirose Electric

DF19A-2830SCFA by Hirose Electric is a female contact with 30-28 AWG wire size range. Made of phosphor bronze, it has a 0.079" terminal length and straight mounting style. Ideal for assembly products requiring precise connections in various applications.

39-00-0041

Molex

Molex 39-00-0041 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing with wire sizes ranging from 24 to 18 AWG. Suitable for applications requiring male contact gender and straight mounting style.

HM2DK1256RLF

AMPHENOL ICC

CONNECTOR ACCESSORY; Assembly Item Name: CODING ITEM; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO;

5318201

Altech

CONNECTOR ACCESSORY; Maximum Operating Temperature: 120 Cel; DIN Conformity: NO; Material: GLASS FILLED POLYAMIDE6; Additional Features: IP68; Minimum Operating Temperature: -30 Cel;

222-500

Wago

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: MOUNTING ITEM;

12124582

Aptiv

Aptiv 12124582 CONTACT is a CRIMP terminal made of COPPER ALLOY for FLRY-B cables. It has a 0.075-0.11 inch cable entry range, ideal for automotive wiring harness assembly. This Assembly Product offers precise and reliable connections in vehicle electrical systems.

08-70-0069

Molex

Molex 08-70-0069 CONTACT features CRIMP terminal type, BRASS material, and 0.186" terminal length. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and COMPRESSION contact design in assemblies with wire sizes ranging from 28 AWG to 22 AWG.

SPHD-002T-P0.5

J S T Mfg

SPHD-002T-P0.5 by J S T Mfg is a CRIMP connector with bellowed contact style, suitable for 28-24 AWG wires. It has a rated current of 3A and can handle up to 100V AC/DC. Ideal for applications requiring reliable female connectors with low contact resistance in temperatures ranging from -25 to 85°C.

16-02-0115

Molex

Molex 16-02-0115 CONTACT features CRIMP terminals, suitable for 24-22 AWG wires. With a rated current of 3A and contact resistance of 15 mohm, it is ideal for applications requiring male connectors with SQUARE PIN-SOCKET style contacts. Operating temperature ranges from -40 to 120 °C.

WP-4P

TE Connectivity

WP-4P by TE Connectivity is an Assembly Product designed for DTP SERIES applications. It features a temperature range of -55 to 125°C, supports wire sizes up to 0 AWG, and is made of Polybutylene Terephthalate. Ideal for power and signal connections in various industries.

2-964269-2

TE Connectivity

CONNECTOR ACCESSORY;

2064600021

Molex

CONNECTOR ACCESSORY;

1060-16-0644

TE Connectivity

TE Connectivity 1060-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 16 AWG and rated current of 13A. Ideal for applications requiring male contact gender, with operating temperatures ranging from -55 to 150°C.

1SNK900001R0000

TE Connectivity

TE Connectivity's 1SNK900001R0000 is a UL-approved terminal block with insulator material POLYAMIDE. It has a wide operating temperature range (-55 to 110 °C) and supports wire sizes up to 0 AWG. Ideal for various assembly applications requiring secure wire connections.

1-66100-9

TE Connectivity

TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.

39-00-0047

Molex

Molex 39-00-0047 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 28 AWG to 22 AWG such as 5557, 30067, and more. Offers a 0.035-0.071 inch cable entry range for versatile use in various assemblies.

M23053/5-106-9

Insultab

ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; IEC Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE;

09300160301

Harting Electronics & Kg

CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: HOUSING; IEC Conformity: NO; DIN Conformity: NO;

3-1447221-4

TE Connectivity

TE Connectivity 3-1447221-4 is a female crimp contact with stamped design for power applications. It supports wire gauge up to 20 AWG, rated at 6A current. Operating temperature ranges from -30°C to 130°C, suitable for assemblies requiring 0.063"-0.075" cable entry.