Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1060-14-0122

Manufacturer

TE Connectivity
Manufacturer's Part Number

1060-14-0122
Description

CONNECTOR ACCESSORY; Rated Current: 13 A; Wire Gauge (AWG): 14; Cross Section Area: 2.08 mm2; Contact Gender: MALE; Terminal Type: CRIMP;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

LL4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

CRG0805F10R

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

LM2931Z-5.0G

Onsemi

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

Details

1N4148WS

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720A-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NE555D

Philips Semiconductors

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148W-7-F

Diodes Incorporated

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

1060-14-0122 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Other Names:	1734-1140-2 1734-1140-1
Wire Gauge (AWG):	14
Maximum Wire Size:	14 AWG
Minimum Cable Entry:	.095 inch
Contact Design:	STAMPED
Contact Style:	ROUND PIN-SOCKET
Terminal Type:	CRIMP
IEC Conformity:	NO
Material:	COPPER ALLOY
Minimum Operating Temperature:	-55 Cel
Cross Section Area:	2.08 mm2
Minimum Wire Size:	18 AWG
MIL Conformity:	NO
Terminal Length:	.3 inch
Contact Gender:	MALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CONTACT
Maximum Operating Temperature:	125 Cel
Rated Current:	13 A
DIN Conformity:	NO
Maximum Cable Entry:	.15 inch

Category Top Products

39-00-0041

Molex

Molex 39-00-0041 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing with wire sizes ranging from 24 to 18 AWG. Suitable for applications requiring male contact gender and straight mounting style.

HDC26-24

TE Connectivity

TE Connectivity's HDC26-24, part of the HD SERIES, features a max operating temperature of 125°C and min of -55°C. With a max wire size of 0 AWG, it is a female contact assembly item made of plastic. Ideal for applications requiring durable connectors in extreme temperature conditions.

1062-20-0122

TE Connectivity

TE Connectivity's 1062-20-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 AWG to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 125°C.

42815-0144

Molex

Molex 42815-0144 is a female contact for Mini Fit connectors. Made of copper alloy, it supports wire sizes from 16 to 14 AWG. With a bellowed type design and straight mounting style, it is ideal for power applications with a finish thickness of 10.

8655MH1501BLF

AMPHENOL ICC

Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.

1-794606-1

TE Connectivity

TE Connectivity 1-794606-1 is a stranded crimp terminal with a rated voltage of 250V and a max operating temperature of 105°C. It is commonly used in power applications, with approvals from CSA, UL, and VDE.

221-523/000-004

Wago

TERMINAL BLOCK ACCESSORY;

51164-0905

Molex

Assembly Items;

1060-16-1222

TE Connectivity

TE Connectivity 1060-16-1222 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 12 AWG and rated current of 13 A. Ideal for applications requiring male contact gender, with operating temperatures ranging from -55°C to 125°C.

AT60-12-0166

Amphenol

CONNECTOR ACCESSORY;

DT06-12SC-CE04

TE Connectivity

TE Connectivity's DT06-12SC-CE04 is a FEMALE connector with 13A rated current and 250V DC voltage. It has 0.053" to 0.12" cable entry, -55°C to 125°C operating temperature range. Ideal for POWER AND SIGNAL applications requiring reliable connections in harsh environments.

1062-16-1222

TE Connectivity

TE Connectivity's 1062-16-1222 crimp terminal features stamped contact design, suitable for wire gauge 12 AWG with a cross section area of 3.3 mm². It can handle up to 13A current and operates b/w -55°C to 125°C, making it ideal for various assembly products applications.

936010822

Molex

CONNECTOR ACCESSORY;

0460-215-16141

TE Connectivity

TE Connectivity's 0460-215-16141 is a male power contact with crimp terminal type, suitable for 14 AWG wire. It has a rated current of 13A and operates b/w -55°C to 125°C. Ideal for applications requiring straight mounting, such as power assemblies.

1010-009-0206

TE Connectivity

CONNECTOR ACCESSORY;

131250-006

TE Connectivity

CONNECTOR ACCESSORY; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER;

3341-1S

3m Electronic Products Division

The 3m Electronic Products Division's 3341-1S JACK SCREW is made of steel, with a straight mounting style and #4-40 screw option. It has a terminal length of 7.9 inches, ideal for assembly applications requiring secure fastening in electronic devices.

WP-4P

TE Connectivity

WP-4P by TE Connectivity is an Assembly Product designed for DTP SERIES applications. It features a temperature range of -55 to 125°C, supports wire sizes up to 0 AWG, and is made of Polybutylene Terephthalate. Ideal for power and signal connections in various industries.

R85049/85-08W02

TE Connectivity

CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 175 Cel;

0-0281934-2

TE Connectivity

TE Connectivity 0-0281934-2 SEALING ITEM has a temp range of -40 to 130°C, fits up to 0 AWG wire, and allows for cable entry of 2.4". Ideal for sealing applications in various industries.