Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1060-16-1222

Manufacturer

TE Connectivity
Manufacturer's Part Number

1060-16-1222
Description

CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Wire Size: 16 AWG; Maximum Wire Size: 12 AWG; Terminal Type: CRIMP; Contact Gender: MALE;
Datasheet

Datasheet

Not In Stock

Popular Products

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

SMBJ18CA

Sensitron Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

LM358AN

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Micro Commercial Components

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Thinking Electronic Industrial

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

ULN2803ADWG4

Texas Instruments

ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

1N4148

General Diode

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;

Details

BAV99

Weitron Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;

Details

2N2222A

Micropac Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Lite-on Technology

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;

Details

1060-16-1222 Technical Details

TYPE	DESCRIPTION
Other Names:	1734-1137-2 1734-1137-1 2266-1060-16-1222
Wire Gauge (AWG):	12
Maximum Wire Size:	12 AWG
Minimum Cable Entry:	.075 inch
Contact Design:	STAMPED
Terminal Type:	CRIMP
Minimum Operating Temperature:	-55 Cel
Cross Section Area:	3.31 mm2
Minimum Wire Size:	16 AWG
Contact Gender:	MALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Maximum Operating Temperature:	125 Cel
Rated Current:	13 A
Maximum Cable Entry:	.14 inch

Category Top Products

AT62-16-0122

Amphenol

CONNECTOR ACCESSORY;

507528200

Molex

Molex 507528200 CONTACT features CRIMP terminals for 22-20 AWG wires, rated at 3.5A and 250V AC/DC. Suitable for applications requiring FEMALE CHAIN contacts with 0.0591-0.0709 inch cable entry, ideal for Assembly Products.

5-66506-3

TE Connectivity

TE Connectivity 5-66506-3 is a male signal contact with brass material. It has a finish thickness of 30, supports wire gauge up to 20 AWG, and operates b/w -55°C to 105°C. Ideal for applications requiring crimp terminals with 0.05" to 0.06" cable entry.

2M809-002

Amphenol

Amphenol's 2M809-002 is a crimp terminal contact with a wire size range of 28-22 AWG. It has a rated current of 5A and is designed for female connectors. This assembly product is commonly used in various applications requiring secure wire connections.

W4S-ZZ

TE Connectivity

W4S-ZZ by TE Connectivity is an Assembly Product for DT SERIES. It features a max operating temp of 125°C and min of -55°C. With a design for POWER AND SIGNAL, it supports wire sizes up to 0 AWG and is made of POLYBUTYLENE TEREPHTHALATE.

2200156

Phoenix Contact

TERMINAL BLOCK ACCESSORY;

AWM-3P

Amphenol

CONNECTOR ACCESSORY;

1SET111003R0000

TE Connectivity

TE Connectivity 1SET111003R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 18 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C, it features a STRAIGHT mounting style.

5054311000

Molex

Molex 5054311000 CONTACT features: Rated AC Voltage 50V, Rated Current 1.5A, Material COPPER ALLOY. Application: Ideal for assemblies requiring FEMALE contacts with STRAIGHT mounting and SQUARE PIN-SOCKET style. Accepts wire sizes from 30 AWG to 26 AWG.

DF3-2428SC

Hirose Electric

DF3-2428SC by Hirose Electric features crimp terminal type, 28-24 AWG wire size compatibility, and 3A rated current. Ideal for discrete wire cable types in applications requiring female contact gender and straight mounting style.

DF11-2428SCA

Hirose Electric

DF11-2428SCA by Hirose Electric is a crimp terminal connector with 2A rated current, suitable for 28-24 AWG wires. It has a contact resistance of 30 mohm and operates b/w -40 to 85 °C. Ideal for DF11 Series applications, it features female contacts and phosphor bronze material in a straight mounting style.

5-66506-9

Tyco Electronics Amp

5-66506-9 by Tyco Electronics Amp is a CRIMP terminal with 0.05" min cable entry, suitable for 24-20 AWG wires. Its ROUND PIN-SOCKET contact design and MALE gender make it ideal for straight mounting applications in assembly products.

M80-0130005

Harwin Plc

The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.

1-1469492-9

TE Connectivity

TE Connectivity 1-1469492-9 is an Assembly Product with max. operating temp. of 105°C and min. of -55°C. Featuring a max wire size of 0 AWG, it has a rated current of 1A and is made of zinc alloy. Ideal for applications requiring right angle mounting style like GUIDE ITEM assembly tasks.

SWPT-001T-P025

J S T Mfg

CONNECTOR ACCESSORY;

0-0880810-1

TE Connectivity

CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Usage: 282080 or 282104 HOUSING; Maximum Wire Size: 0 AWG; IEC Conformity: NO;

78211-003LF

Amphenol Communications Solutions

CONNECTOR ACCESSORY;

08-55-0124

Molex

Molex 08-55-0124 CONTACT features CRIMP terminal type for 22-30 AWG wire sizes. Designed for SIGNAL applications, it has FEMALE contact gender with COMPRESSION style in BRASS material. Ideal for 0.062" cable entry, with a finish thickness of 15, this assembly product is perfect for various electronic connections.

1731110062

Molex

Molex 1731110062 is a zinc alloy backshell for FCT D-SUB size 3 connectors. It can operate in temperatures ranging from -35°C to 100°C. Mounting options include #4-40 screws, making it ideal for industrial applications.

09200030301

Harting Electronics & Kg

CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: HOUSING; Maximum Operating Temperature: 125 Cel;