Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

131250-006

Manufacturer

TE Connectivity
Manufacturer's Part Number

131250-006
Description

CONNECTOR ACCESSORY; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Calogic

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

STM32H753ZIT6

STMicroelectronics

STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DP83848IVVX/NOPB

Texas Instruments

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

Details

1N4148WS

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Sprague

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

SS14

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Samsung

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;

Details

BAV99

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS140T3G

Onsemi

MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

CRCW04020000Z0EDHP

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.

Details

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Details

2N7002

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;

Details

2N2222A

Hi-tron Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

131250-006 Technical Details

TYPE	DESCRIPTION
Maximum Wire Size:	0 AWG
Connector Accessory Type:	CONNECTOR ACCESSORY
Maximum Operating Temperature:	150 Cel
Material:	ELASTOMER
Minimum Operating Temperature:	-75 Cel

Category Top Products

WM-2P

TE Connectivity

The TE Connectivity WM-2P is an assembly product designed for DTM SERIES applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it's ideal for power and signal connections in various industries.

205090-1

TE Connectivity

205090-1 by TE Connectivity is an assembly product used in AMPLIMITE applications. It has a finish thickness of 50, terminal type of crimp, and can operate b/w -55 to 125 °C. It is designed for signal transmission with a max rated current of 7.5 A and can accommodate wire sizes ranging from 24 AWG to 20 AWG.

1-66099-5

TE Connectivity

TE Connectivity 1-66099-5 is a crimp terminal for CPC/G and M series connectors. Featuring brass material, it has a cross section area of 1.4 mm2 and can accommodate wire sizes from 18 to 16 AWG. Ideal for power and signal applications with a rated current of 13A at temperatures ranging from -55 to 90°C.

0462-209-16141

TE Connectivity

TE Connectivity's 0462-209-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 14 AWG wire and rated at 13A. Ideal for POWER applications requiring FEMALE contacts in STRAIGHT mounting style.

50217-9001

Molex

The Molex 50217-9001 is a female contact with crimp terminal type for 51067 SERIES HOUSING. It supports wire sizes from 24 AWG to 18 AWG, with 0.055" to 0.118" cable entry. The contact design features a square pin-socket made of brass, suitable for straight mounting applications.

5011937000

Molex

Molex 5011937000 is a PICO-CLASP CONNECTOR with CRIMP terminals. It has a rated current of 1.5A and can handle up to 50V AC/DC voltage. The contact material is PHOSPHOR BRONZE, suitable for wire sizes ranging from 32-28 AWG in straight mounting applications.

M83513/05-07

Amphenol

CONNECTOR ACCESSORY; Manufacturer Series: M83513/05-07; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Assembly Item Name: JACKPOST KIT;

0-0281934-4

TE Connectivity

CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;

SPHD-001T-P0.5

J S T Mfg

SPHD-001T-P0.5 by J S T Mfg is a CRIMP terminal for PBV SERIES CONNECTOR with 3A rated current, 20 mohm contact resistance, and 0.039-0.059 inch cable entry. Ideal for 26-22 AWG wires in applications requiring FEMALE contacts at -25 to 85 °C temperature range.

64325-1010

Molex

CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: SEALING ITEM; MIL Conformity: NO; Usage: 64318, 64319, 64320, 64321; DIN Conformity: NO;

5748676-1

TE Connectivity

TE Connectivity 5748676-1 is a zinc alloy BACKSHELL with shielding, suitable for PLUG/RECEPTACLE applications. It supports cable entry from 0.185" to 0.32", operating in temperatures from -55°C to 105°C. Mounting options include #4-40 screws and it accommodates up to 0 AWG wire size.

XS2Z-31

Omron

CONNECTOR ACCESSORY;

HBL60CM31

Hubbell

CONNECTOR ACCESSORY;

1727040098

Molex

Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.

MINI-SSHL-002T-P0.2

J S T Mfg

MINI-SSHL-002T-P0.2 by J S T Mfg is a UL approved assembly product with crimp terminals, stamped contact design, and bellowed contact style. It is used in GH Series connectors for 30-26 AWG wires, rated at 1A and 50V DC/AC. Operating temperature ranges from -25 to 85°C making it ideal for various electrical applications.

35021-1160

Molex

Molex 35021-1160 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and RIGHT ANGLE mounting style. Ideal for use with 35022-00, 35023-00, and 68418 assemblies. Supports wire sizes from 28 AWG to 22 AWG with a 0.074 inch cable entry.

226537-1

TE Connectivity

TE Connectivity 226537-1 CONTACT features TPX insulator, 30 finish thickness, and brass material. Ideal for RD 316, RG 161, RG 174 cables with a max wire size of 0 AWG. Designed for power and signal applications with straight mounting style and male contact gender.

50802-8100

Molex

The Molex 50802-8100 is a crimp terminal contact with square pin-socket style, suitable for 51191 housing. It supports wire sizes from 28 to 22 AWG and features a 0.154" terminal length. Ideal for applications requiring female contacts with straight mounting style and brass material construction.

AW12P

Amphenol

AW12P by Amphenol is an assembly product for AT Series connectors. It has a temperature range of -55°C to 125°C, suitable for various environments. With a wire size compatibility of 20-14 AWG and made of polyethylene, it ensures reliable connections in diverse applications.

9028240000

Weidmueller & Kg

TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): CSA; GOST; Assembly Item Name: FERRULE-STEPPED; DIN Conformity: NO; IEC Conformity: NO;