Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

VN920SP-E

Manufacturer

STMicroelectronics
Manufacturer's Part Number

VN920SP-E
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HSOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Crimson Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Uniohm

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Weitron Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

2N7002

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

GRM155R71H103KA88D

Murata Manufacturing

The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.

Details

SMBJ18CA

Silicon Standard

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

C1206C104M5RACTU

KEMET Corporation

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Changzhou Galaxy Century Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

VN920SP-E Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	13 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	3.65 mm
Maximum Output Current:	30 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	Matte Tin (Sn) - annealed
No. of Terminals:	10
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG
JESD-30 Code:	R-PDSO-G10
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Package Code:	HSOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.5 mm
Moisture Sensitivity Level (MSL):	3
Driver No. of Bits:	1
Maximum Supply Voltage:	36 V
JESD-609 Code:	e3
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP10,.55FL
Output Current Flow Direction:	SOURCE
Length:	9.4 mm
Peak Reflow Temperature (C):	250
Terminal Pitch:	1.27 mm
Power Supplies (V):	8/36

Category Top Products

AUIR3313STRL

Infineon Technologies

AUIR3313STRL by Infineon Technologies is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It has a max output current of 23A and is suitable for applications requiring interface IC type buffer or inverter based peripheral drivers. The package style is small outline with heat sink/slug, making it ideal for compact designs.

LMD18201T/NOPB

National Semiconductor

HB BASED PERIPHERAL DRIVER WITH PWM; Terminal Form: THROUGH-HOLE; No. of Terminals: 11; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Moisture Sensitivity Level (MSL): 1;

TPS27082LDDCR

Texas Instruments

TPS27082LDDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V and a max output current of 3A. It is commonly used in automotive applications for its built-in transient protection and open-drain output characteristics.

VND7140AJ12TR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

CSD88599Q5DCT

Texas Instruments

CSD88599Q5DCT by Texas Instruments is a half bridge based peripheral driver with a max supply voltage of 54V and operating temperature range of -55 to 150°C. With 22 terminals in a small outline package, it is ideal for applications requiring source and sink output current flow direction in military-grade environments.

MIC5801YWM

Micrel

LATCH BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;

VND5050AK-E

STMicroelectronics

VND5050AK-E by STMicroelectronics is a peripheral driver with 24 terminals, operating voltage range of 4.5-36 V, and built-in protections against various faults. It features a small outline package style suitable for surface mount applications. Ideal for buffering or inverting signals in electronic circuits requiring source current flow direction control.

SZNUD3112DMT1G

Onsemi

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;

BTS443PXT

Infineon Technologies

BTS443PXT by Infineon is a MOS peripheral driver with 36V max supply voltage, 7.6A output peak current limit, and built-in protections. It is used for buffer or inverter-based interface ICs in applications requiring sink output current flow direction and fast turn-on/off times.

SI9986DY-T1-E3

Vishay Siliconix

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

L293DDWP

Texas Instruments

L293DDWP by Texas Instruments is a half bridge peripheral driver with 2 functions, operating at 5V nominal voltage. It offers built-in transient and thermal protections, with a max supply voltage of 36V. Ideal for applications requiring source and sink output current flow direction in commercial temperature grade environments.

BTS4175SGA

Infineon Technologies

BTS4175SGA by Infineon Technologies is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 6V to 13.5V and has a max supply voltage of 52V. This rectangular-shaped device is ideal for applications requiring a small outline package style and sink output current flow direction.

VN808CM-32-E

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR;

ULN2003A

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Pitch: 2.54 mm;

BSP752RXUMA2/SAMPLE

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

ULQ2003ADR2G

Onsemi

ULQ2003ADR2G by Onsemi is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40 to 85°C, has an inverted output polarity, and a nominal voltage of 50V. Ideal for applications requiring sink current flow direction, such as buffer or inverter-based interface ICs.

ITS4141NHUMA1

Infineon Technologies

ITS4141NHUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, MOS technology, and built-in protections. It operates b/w -30 to 85 °C with a supply voltage range of 12-45 V. Ideal for applications requiring buffer or inverter based peripheral drivers.

TDE1708DFT

STMicroelectronics

STMicroelectronics' TDE1708DFT is a peripheral driver with 48V max supply voltage, 24V power supplies, and 0.3A max output current. Ideal for buffer or inverter-based applications, it offers transient and thermal protections, operates b/w -25 to 85 °C, and has a small outline package style.

TPS1H100AQPWPRQ1

Texas Instruments

TPS1H100AQPWPRQ1 by Texas Instruments is a high side driver with built-in protections for transient, over current, thermal, and under voltage. It operates at a max supply voltage of 40V and has a nominal output peak current limit of 7A. Ideal for automotive applications due to its AEC-Q100 screening level and compact rectangular package shape.

IRS21856SPBF

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 2;