Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BTS3408GXT

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BTS3408GXT
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Width: 4 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

Details

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

08055C104KAT2A

KYOCERA AVX

08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

1N4148WS

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Comchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

SS14

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

TCA6424ARGJR

Texas Instruments

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

Details

1N4148

First Components International

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;

Details

FDD5614P

Onsemi

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

BAV99

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BTS3408GXT Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BCDMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	4 mm
Turn-off Time:	8 us
Maximum Supply Voltage:	60 V
Turn-on Time:	8 us
Nominal Output Peak Current Limit:	.55 A
JESD-609 Code:	e3
No. of Functions:	1
Output Current Flow Direction:	SINK
Length:	5 mm
Terminal Pitch:	1.27 mm

Category Top Products

XLMG1210RVRT

Texas Instruments

XLMG1210RVRT by Texas Instruments is a peripheral driver with max supply voltage of 5.25V, thermal protection, and 19 terminals. Ideal for automotive applications, it has a turn-on time of 0.018us and operates b/w -40 to 125 °C.

BTS70081EPPXUMA1

Infineon Technologies

BTS70081EPPXUMA1 by Infineon is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages b/w 6-18V and has a nominal output peak current limit of 11A. Ideal for automotive applications due to AEC-Q100 screening level compliance.

VN5050JTR-E

STMicroelectronics

VN5050JTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a min supply voltage of 4.5V. This CMOS technology-based device is ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.

TPS22925CYPHR

Texas Instruments

TPS22925CYPHR by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 0.65V to 3.6V, and built-in transient protection. It features a compact rectangular package style with very thin profile and fine pitch, suitable for industrial applications requiring source and sink current flow control.

IRS2004SPBF

Infineon Technologies

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

BSP75N

Infineon Technologies

BSP75N by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12/24V power supplies with a max output current of 1A. This small outline package is ideal for automotive applications requiring sink output current flow direction.

UDN2987LWTR

Allegro MicroSystems

Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.

BTS441RGNTMA1

Infineon Technologies

BTS441RGNTMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 43V and built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 21A and is used as a buffer or inverter based peripheral driver in various applications requiring precise control of high currents.

TBD62083AFNG(Z.EL)

Toshiba

The TBD62083AFNG(Z.EL) by Toshiba is a peripheral driver with 8 functions. It has a maximum supply voltage of 25V and a minimum supply voltage of 2.5V. The package style is small outline, low profile, shrink pitch. It can handle a maximum operating temperature of 85°C and a minimum operating temperature of -40°C. Its width is 4.4mm and its length is 6.5mm. The TBD62083AFNG(Z.EL) is an industrial-grade BCDMOS technology device with a nominal supply voltage of 5V. Its interface IC type is buffer or inverter based peripheral driver, and it has a sink output current flow direction.

BTS716GBXUMA1

Infineon Technologies

BTS716GBXUMA1 by Infineon is a MOS technology-based peripheral driver with 4 functions, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 5.5V to 40V and has a nominal output peak current limit of 5.3A. This small outline driver is ideal for automotive applications requiring fast turn-on/off times and sink output current flow direction.

L6201

STMicroelectronics

STMicroelectronics L6201 is a full bridge peripheral driver with 20 terminals. It operates at supply voltages b/w 12V to 48V, offering built-in transient and thermal protections. With a max output peak current of 5A, it is ideal for driving various loads in applications requiring true output polarity control.

ULN2004AD16-U

Diodes Incorporated

ULN2004AD16-U by Diodes Inc. is a peripheral driver with 7 bits, open-collector output characteristics, and a max supply voltage of 13V. It is commonly used as a buffer or inverter based peripheral driver in various applications.

ISP742RIFUMA1

Infineon Technologies

ISP742RIFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, operating at -30 to 85 °C. It offers built-in protections for over current, over voltage, and thermal issues. This small outline package has a max supply voltage of 34 V and sink output current flow direction, suitable for buffer or inverter-based interface IC applications.

IR2085STRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SI9986DY-T1-E3

Vishay Siliconix

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISO8200B

STMicroelectronics

ISO8200B by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 10.5-36 V, making it suitable for automotive applications requiring a nominal output peak current limit of 1.1 A.

ITS724GFUMA1

Infineon Technologies

ITS724GFUMA1 by Infineon Technologies is a peripheral driver with 4 functions. It has a max supply voltage of 40V and can operate in temperatures ranging from -30°C to 85°C. This IC type is commonly used as a buffer or inverter based peripheral driver.

FPF2109

Onsemi

FPF2109 by Onsemi is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V and max output current of 0.4 A. Ideal for industrial applications requiring a compact form factor and source flow direction.

TPS274160BRLHR

Texas Instruments

TPS274160BRLHR by Texas Instruments is a peripheral driver with 4 functions, operating at 5-36V. It offers built-in protections for transient, over current, thermal, and under voltage conditions. Ideal for automotive applications due to its high side driver and standard input characteristics.

BTS432E2E3062AXT

Infineon Technologies

BTS432E2E3062AXT by Infineon: MOS tech, 42V max supply, 44A peak current limit. Applicable as a buffer/inverter-based peripheral driver for various applications requiring source output flow direction control.