Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
4,444	$0.528	$2,347.321

ST3232ECTR

Manufacturer

STMicroelectronics
Manufacturer's Part Number

ST3232ECTR
Description

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

4444 In Stock

Popular Products

SS14

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2277UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

LM358MX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

2N2222A

Gec Plessey Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

General Diode

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

SS14

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0402JR-070RL

Yageo

Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.

Details

DS18B20

Maxim Integrated

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

ST3232ECTR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	1.2 mm
Minimum Out Swing:	10 V
Maximum High Level Input Current:	.000001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	TSSOP
Interface Standard:	EIA-232; TIA-232; V.24; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	4.4 mm
Maximum Output Low Current:	1.6 Amp
Moisture Sensitivity Level (MSL):	3
Other Names:	497-6538-6 ST3232ECTR-ND 497-6538-1 497-6538-2
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	0 Cel
No. of Functions:	2
Qualification:	Not Qualified
Maximum Transmit Delay:	150 ns
Package Equivalence Code:	TSSOP16,.25
Receiver No. of Bits:	2
Length:	5 mm
Maximum Receive Delay:	50 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	3.3/5

Category Top Products

FIN1108MTDX

Onsemi

FIN1108MTDX by Onsemi is a Line Transceiver with 8-bit driver and receiver functions. It operates at 3.3V supply voltage, has a max transmit delay of 1.75ns, and supports EIA-644-A; TIA-644-A interface standard. Ideal for industrial applications requiring differential input characteristics in a compact package style with dual terminal position.

MAX3232IDRG4

Texas Instruments

MAX3232IDRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance with a temperature range of -40 to 85°C.

MAX202ECSE+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

PTHVD1400DRLR

Texas Instruments

PTHVD1400DRLR by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with differential output and input characteristics. It operates in automotive-grade conditions, with a max supply voltage of 5.5V and transmit delay of 500ns. This small outline package is ideal for applications requiring high-speed data transmission in tight spaces.

LTC2865HMSE#PBF

Analog Devices

LTC2865HMSE#PBF by Analog Devices is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates b/w -40 to 125 °C, has a max supply voltage of 5.5 V, and offers differential output. Ideal for automotive applications requiring reliable communication over short distances.

MAX3485EESA+

Analog Devices

MAX3485EESA+ by Analog Devices is a CMOS line driver with 1 function, operating at 3.3V. It offers EIA-422 and EIA-485 interface standards, with a max transmit delay of 35ns. Ideal for industrial applications requiring differential outputs in small outline packages.

MAX232EWE+

Analog Devices

MAX232EWE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28, or V.24 interface standards.

ADM2483BRWZ-REEL

Analog Devices

ADM2483BRWZ-REEL by Analog Devices is a Line Driver & Receiver with 16 terminals, operating voltage range of 2.7V to 5.5V, and max transmit delay of 620ns. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482E interface standards in harsh environments due to its wide temperature range from -40°C to 85°C.

MAX3232CWE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3232CSE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SP3485EN-L

Exar

Exar's SP3485EN-L is a BICMOS line transceiver with EIA-422/EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it is ideal for industrial applications requiring reliable communication over short distances.

MAX232ACPE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

LTC2870HUFD#PBF

Analog Devices

LTC2870HUFD#PBF by Analog Devices is a Line Driver & Receiver with 2 functions, operating at -40 to 125 °C. It features a max supply voltage of 5.5 V, max transmit delay of 70 ns, and differential output for EIA-232, EIA-422, EIA-485 interfaces. Ideal for automotive applications due to its technology and terminal finish in Matte Tin (Sn).

MAX485EPA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

MAX3485CSA+T

Analog Devices

Analog Devices' MAX3485CSA+T is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for applications requiring fast data transmission in commercial temperature environments up to 70°C.

MAX3232ESE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ADM101EARMZ-REEL7

Analog Devices

ADM101EARMZ-REEL7 by Analog Devices is a Line Driver & Receiver with 5V power supply, operating temperature range of -40 to 85°C, and EIA-232 interface standard. It features BICMOS technology, Schmitt trigger input characteristics, and 1.6A max output low current. Ideal for industrial applications requiring reliable communication over short distances.

ISO3082DWR

Texas Instruments

ISO3082DWR by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 1.3ns, differential output, and interface standards EIA-422/485 for industrial applications. The package is small outline, surface mountable, with a terminal pitch of 1.27mm and moisture sensitivity level of MSL2.

ST3485EIDT

STMicroelectronics

ST3485EIDT by STMicroelectronics is a line driver with 3-3.6V supply voltage, 30ns max transmit delay, and EIA-422/EIA-485 interface standard. It's used in automotive applications for differential output and Schmitt trigger input characteristics.

LT1785AIS8#PBF

Analog Devices

LT1785AIS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating voltage range of 4.75-5.25 V, and differential output. It has a max transmit delay of 2000 ns and receive delay of 900 ns, suitable for EIA-422/EIA-485 interface applications in industrial settings.