Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LTC2870IUFD#TRPBF

Manufacturer

Linear Technology
Manufacturer's Part Number

LTC2870IUFD#TRPBF
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;

Details

SMBJ18CA

General Instrument

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Carlisle Interconnect Technologies

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Pro-an Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

2N7002

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

2N2222A

Microsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

LD1117S33CTR

STMicroelectronics

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

Details

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

LTC2870IUFD#TRPBF Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	1.7 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	3 V
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	.8 mm
Minimum Out Swing:	1.5 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	28
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	CMOS
JESD-30 Code:	R-PQCC-N28
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Interface Standard:	EIA-232; EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	4 mm
Nominal Supply Voltage-1:	3.3 V
Maximum Supply Voltage-1:	5.5 V
Maximum Output Low Current:	3 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	3
Maximum Supply Voltage:	5.5 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	3
Qualification:	Not Qualified
Maximum Transmit Delay:	70 ns
Package Equivalence Code:	LCC28,.16X.2,20
Receiver No. of Bits:	3
Length:	5 mm
Maximum Receive Delay:	200 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3

Category Top Products

MAX232CPE+

Analog Devices

Analog Devices' MAX232CPE+ is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 40,000ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E interfaces in commercial temperature grade applications.

ICL3221EIAZ-T

Renesas Electronics

Renesas Electronics' ICL3221EIAZ-T is a CMOS line transceiver with 16 terminals, operating b/w -40 to 85°C. It supports EIA-232, TIA-232, V.24, and V.28 interfaces with Schmitt trigger input characteristics. Ideal for industrial applications requiring a small outline package with dual terminal position and matte tin finish.

ADM2485BRWZ

Analog Devices

ADM2485BRWZ by Analog Devices is a Line Driver & Receiver with 16 terminals and a supply voltage range of 2.7V to 5.5V. It features a max transmit delay of 55ns, differential output, and operates in industrial temperature range (-40°C to 85°C). Ideal for EIA-485-A, TIA-485-A, ISO 8482E interface standards in various applications requiring reliable communication over long distances.

AM26LS31CN

NXP Semiconductors

LINE DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

ISL3283EIHZ-T

Intersil

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;

DS26C31TM/NOPB

National Semiconductor

LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ICL3232IBNZ-T7A

Integrated Device Technology

LINE TRANSCEIVER;

ISL3283EIHZ-T

Renesas Electronics

ISL3283EIHZ-T by Renesas Electronics is a Line Receiver IC with 6 terminals, operating at 3.3V nominal voltage. It features EIA-485 and EIA-422 interface standards, with a max receive delay of 60ns. Ideal for industrial applications requiring differential Schmitt trigger input characteristics in a compact package style.

ISL83072EIBZA-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD1780DG4

Texas Instruments

SN65HVD1780DG4 by Texas Instruments is a Line Driver & Receiver with 3.3/5V power supplies, operating temperature range of -40 to 105°C, and EIA-485-A interface standard. It features differential output, dual terminal position, and nickel/palladium/gold finish. Ideal for industrial applications requiring reliable communication over long distances.

DS26C32ATMX

Texas Instruments

DS26C32ATMX by Texas Instruments is a 4-function line driver/receiver with 16 terminals, operating at 5V. It features a CMOS technology interface supporting EIA-422, EIA-423 standards. With a temperature range of -40 to 85°C, it's ideal for industrial applications requiring differential Schmitt trigger input characteristics.

ADM2587EBRWZ

Analog Devices

ADM2587EBRWZ by Analog Devices is a Line Driver & Receiver with 3.3/5 V power supplies, 700 ns max transmit delay, and EIA-485-A interface standard. Ideal for industrial applications requiring differential output and operating temperatures from -40 to 85 °C. Package style is small outline with dual terminals in matte tin finish.

THVD1400DR

Texas Instruments

THVD1400DR by Texas Instruments is an EIA-485-A/TIA-485-A/EIA-422 line transceiver with a 3-5.5V supply voltage range, 500ns max transmit delay, and 110ns max receive delay. Ideal for automotive applications due to its nickel palladium gold finish, small outline package style, and -40 to 125°C operating temperature range.

SN65LVDS93ADGGR

Texas Instruments

SN65LVDS93ADGGR by Texas Instruments is a 56-terminal line driver with 4 functions, operating at 3.3V. It offers differential output, complementary polarity, and industrial temperature grade suitability for various applications requiring high-speed data transmission in compact spaces.

DS26LV31TM/NOPB

Texas Instruments

DS26LV31TM/NOPB by Texas Instruments is a 4-function line driver with 16 ns max transmit delay and 3.6 V max supply voltage. Ideal for EIA-422-B, TIA-422-B, and V.11 interfaces in industrial applications requiring true output polarity and differential outputs.

ISOW1412DFMR

Texas Instruments

ISOW1412DFMR by Texas Instruments is a line driver/receiver with 20 terminals, operating at -40 to 125°C. It supports EIA-422 and EIA-485 interfaces, with true output polarity and differential output. This industrial-grade IC has a small outline package style for applications requiring reliable data transmission in harsh environments.

SN65HVD78DGK

Texas Instruments

SN65HVD78DGK by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 15ns max transmit delay, and 8A max output low current. Ideal for automotive applications, it operates in temperatures from -40 to 125°C and interfaces using EIA-422/EIA-485 standards.

MAX3232CPWR

Texas Instruments

MAX3232CPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-F interface standard. Ideal for applications requiring reliable communication in commercial temperature range.

SN65HVD485EDR

Texas Instruments

SN65HVD485EDR by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with a 5.5V supply voltage, 30ns transmit delay, and 200ns receive delay. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a small outline package.

LT1791IS#PBF

Analog Devices

LT1791IS#PBF by Analog Devices is a Line Driver & Receiver with 14 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.25V and differential output characteristics suitable for EIA-422 and EIA-485 interfaces. Ideal for industrial applications requiring high-speed data transmission within tight dimensional constraints.