Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

USB2513B-AEZC

Manufacturer

Standard Microsystems
Manufacturer's Part Number

USB2513B-AEZC
Description

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: OTHER; Package Code: HVQCCN; Additional Features: ALSO REQUIRES 3.3V SUPPLY; Maximum Seated Height: 1 mm; External Data Bus Width: 0;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

BAV99

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Forward International Electronics

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OHN3140U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

LAN8720A-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

1N4148WS

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;

Details

2N2222A

Motorola

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

1N4148WS

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USB2513B-AEZC Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Peripheral IC Type:	BUS CONTROLLER, UNIVERSAL SERIAL BUS
Nominal Supply Voltage:	3.3 V
Maximum Supply Voltage:	3.6 V
Maximum Seated Height:	1 mm
External Data Bus Width:	0
Minimum Operating Temperature:	0 Cel
Address Bus Width:	0
Length:	6 mm
Technology:	CMOS
Maximum Clock Frequency:	24 MHz
Additional Features:	ALSO REQUIRES 3.3V SUPPLY
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Bus Compatibility:	I2C
Width:	6 mm
Terminal Pitch:	.5 mm
Temperature Grade:	OTHER

Category Top Products

CYUSB3013-BZXC

Infineon Technologies

CYUSB3013-BZXC by Infineon: 16-bit external data bus, 625 MBps max data transfer rate, 19.2 MHz clock frequency. Ideal for USB bus controllers in commercial applications with I2C, I2S, SPI compatibility.

TUSB9261PVP

Texas Instruments

TUSB9261PVP by Texas Instruments is a bus controller with a max data transfer rate of 384 MBps. It has a package style of flatpack, heat sink/slug, thin profile, and fine pitch. This peripheral IC type is commonly used for ATA and ATAPI drive interfaces.

ISP1581BD,557

NXP Semiconductors

NXP Semiconductors' ISP1581BD,557 is a BUS CONTROLLER with 8-bit Address Bus Width and 12.5 MBps Data Transfer Rate. It operates at -40 to 85 °C, supports ATA/ATAPI bus compatibility, and is ideal for industrial applications requiring USB peripheral control.

TUSB7340RKMT

Texas Instruments

TUSB7340RKMT by Texas Instruments is a BUS CONTROLLER IC with 100 terminals, operating at 1.045-1.155 V, supporting PCI and I2C buses. It has a data transfer rate of 625 MBps, clock frequency up to 50 MHz, and operates b/w 0-70°C. Ideal for applications requiring high-speed USB connectivity in compact designs.

USB2512B/M2

Microchip Technology

The Microchip Technology USB2512B/M2 is a BUS CONTROLLER with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24 MHz and a low supply current of 65 mA. Ideal for applications requiring high-speed data transfer over Universal Serial Bus connections.

FT230XQ-T

FTDI

FT230XQ-T by FTDI is a bus controller with 16 terminals, operating voltage range of 2.97-5.5V, and data transfer rate up to 60MBps. Ideal for UART and USB bus compatibility applications, it features a compact square package style with a max clock frequency of 12.02MHz.

TUSB3210PM

Texas Instruments

TUSB3210PM by Texas Instruments is a 64-terminal bus controller with 3.3V power supply, operating at temperatures from 0 to 70°C. It features a max clock frequency of 12MHz and supports USB peripheral ICs. Ideal for applications requiring low-profile, fine-pitch package styles in commercial-grade environments.

CYUSB2014-BZXC

Cypress Semiconductor

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 121; Package Code: TFBGA; Package Shape: SQUARE;

USB5807CT-I/KD

Microchip Technology

USB5807CT-I/KD by Microchip Technology is a BUS CONTROLLER with 625 MBps data transfer rate, 25 MHz clock frequency, and 1.2 V nominal voltage. Ideal for I2C, SMBUS, SPI, and USB bus compatibility applications in industrial settings due to its compact size and low power consumption.

PI7C9X3G606GPBFCAEX

Diodes Incorporated

PI7C9X3G606GPBFCAEX by Diodes Inc. is a 144-terminal bus controller IC with 0.9V to 0.99V supply voltage range and 0.0125 MBps data transfer rate. It is designed for PCI bus compatibility, featuring a low-profile grid array package suitable for various applications requiring high-speed data processing.

XIO2001IZWS

Texas Instruments

XIO2001IZWS by Texas Instruments is a PCI bus controller with 32-bit address and external data bus width. It operates at a max clock frequency of 125 MHz, supporting a data transfer rate of up to 250 MBps. This industrial-grade IC has a low profile grid array package suitable for various applications requiring high-speed data processing.

PCA9564D

NXP Semiconductors

PCA9564D by NXP Semiconductors is a Bus Controller with 20 terminals, operating voltage range of 2.3V to 3.6V, and I2C technology. It has an address bus width of 2, external data bus width of 8, and supports various bus compatibilities like 8049, 8051, Z80. Ideal for industrial applications requiring reliable bus control in compact spaces.

CY7C65630-56LTXCT

Infineon Technologies

CY7C65630-56LTXCT by Infineon is a 3.3V BUS CONTROLLER with 24 MHz clock frequency, suitable for UNIVERSAL SERIAL BUS applications. It features a 56-terminal CHIP CARRIER package with matte tin finish and operates b/w 0 to 70°C temperature range. This surface-mount device has a compact square shape, making it ideal for space-constrained designs.

PI7C9X2G303ELBZXEX

Pericom Semiconductor

BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 136; Package Code: QCCN; Package Shape: SQUARE;

CY7C65642-48AXCT

Infineon Technologies

CY7C65642-48AXCT by Infineon is a bus controller with 48 terminals, operating at 3.3/5V and 12MHz clock frequency. It is used in commercial applications requiring USB peripheral ICs compatible with I2C bus technology. The package style is flatpack, low profile, fine pitch, suitable for surface mount assembly with a max seated height of 1.6mm.

USB5537B-5000AKZE

Microchip Technology

Microchip USB5537B-5000AKZE is a Bus Controller with 625 MBps data rate, 25 MHz clock frequency, and 1.31 V max supply voltage. Ideal for I2C, SMBUS, SPI, and USB applications in commercial-grade temperature environments.

PEX8604-BA50BC

Plx Technology

BUS CONTROLLER, PCI; Terminal Form: BALL; No. of Terminals: 196; Package Code: BGA; Package Shape: SQUARE; Maximum Seated Height: 1.9 mm;

SC18IM704PWJ

NXP Semiconductors

SC18IM704PWJ by NXP Semiconductors is a bus controller IC with 16 terminals, operating b/w -40 to 105°C. It supports I2C and UART buses, with a clock frequency of 0.4 MHz. This CMOS technology chip has a small outline package suitable for various applications requiring bus control functionalities.

MCP2210T-I/MQ

Microchip Technology

MCP2210T-I/MQ by Microchip Technology is a BUS CONTROLLER with SPI and USB compatibility. It operates at 3.3-5.5V, 12MHz clock frequency, and 1.5MBps data transfer rate. Ideal for applications requiring low power consumption and high-speed communication in compact designs.

SC18IS600IPW,128

NXP Semiconductors

SC18IS600IPW,128 by NXP Semiconductors is a bus controller with 16 terminals and operates at 2.4-3.6V. It has a clock frequency of 18MHz, suitable for industrial applications requiring I2C communication in a compact package measuring 5x4.4mm with dual terminal position and Gull Wing form factor.