Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LAN9303MI-AKZE

Manufacturer

Standard Microsystems
Manufacturer's Part Number

LAN9303MI-AKZE
Description

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 72; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

NE555/D

General Electric Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;

Details

LL4148

Secos

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM555CN

Rca Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM317TG

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

Details

BAV99

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS3103F

Idec

ROTARY SWITCH;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

BAV99

ROHM

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

NE555D

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SS14

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

BAV99

Weitron Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;

Details

2N2222A

Continental Device India

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

LAN9303MI-AKZE Technical Details

TYPE	DESCRIPTION
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	3.3 V
Telecom IC Type:	ETHERNET TRANSCEIVER
Maximum Seated Height:	1 mm
Surface Mount:	YES
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
No. of Terminals:	72
Qualification:	Not Qualified
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Length:	10 mm
JESD-30 Code:	S-XQCC-N72
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	10 mm
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

TJA1051T/3/1J

NXP Semiconductors

NXP Semiconductors' TJA1051T/3/1J is a CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm and supports surface mount assembly.

88E1111-B2-NDC2I000

Marvell Technology

Marvell's 88E1111-B2-NDC2I000 is a CMOS Ethernet transceiver with 96 terminals in a square chip carrier package. It has a terminal pitch of 0.6mm and operates at a nominal voltage of 1V. Ideal for network interfaces, this surface-mount device measures 9x9mm with a max seated height of 0.85mm.

TJA1042T/3,112

NXP Semiconductors

NXP Semiconductors' TJA1042T/3,112 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.

SN65HVD232DR

Texas Instruments

SN65HVD232DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, ideal for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C. Perfect for network interfaces requiring low supply current and high reliability.

LTC2875IS8#TRPBF

Analog Devices

LTC2875IS8#TRPBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating from -40 to 85°C. It has a small outline package style, matte tin finish, and nominal voltage of 3.3V. Ideal for network interfaces in industrial telecom applications.

PCA82C250TD

NXP Semiconductors

PCA82C250TD by NXP Semiconductors is an 8-terminal interface circuit with a nominal voltage of 5V. It operates in automotive-grade temperature range from -40 to 125°C, suitable for network interfaces. The package style is small outline, surface mountable, with terminal finish in nickel palladium gold.

DP83620SQX/NOPB

National Semiconductor

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE;

WIZ810MJ

Wiznet

WIZ810MJ by Wiznet is a network interface with 56 terminals, operating b/w -40°C to 85°C. It supports circuits and has a nominal voltage of 3.3V. With a compact size of 25mm x 48mm, it's ideal for telecom applications requiring reliable connectivity in microelectronic assemblies.

LAN8740AI-EN

Microchip Technology

LAN8740AI-EN by Microchip Technology is an Ethernet transceiver with 100 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.2 V. This network interface, with 32 terminals in a square chip carrier package, is ideal for telecom applications requiring high-speed connectivity.

TJA1042T/3

NXP Semiconductors

NXP Semiconductors' TJA1042T/3 is an AEC-Q100 compliant interface circuit with 1Mbps data rate, suitable for automotive applications. It operates at a voltage of 5V, with a low supply current of 0.07mA. The package style is small outline, making it ideal for space-constrained designs.

KSZ9131RNXV-TRVAO

Microchip Technology

Microchip Technology's KSZ9131RNXV-TRVAO is an Ethernet transceiver with a data rate of 1000 Mbps. It operates in industrial temperature range (-40 to 105°C) and has AEC-Q100 screening level for automotive applications. The package style is chip carrier with 48 terminals, suitable for surface mount assembly.

LTC2875HDD#PBF

Analog Devices

LTC2875HDD#PBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, matte tin finish, and operates b/w -40 to 125 °C. It's a small outline package suitable for automotive applications, with a nominal voltage of 3.3 V. Ideal for network interfaces in compact designs requiring high-temperature tolerance.

LAN8740A-EN

Microchip Technology

LAN8740A-EN by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 0-70°C. Features 32 terminals in a square chip carrier package for surface mount applications. Ideal for telecom equipment requiring TS 16949 screening and commercial temperature grade.

TCAN1051HVDRQ1

Texas Instruments

TCAN1051HVDRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals. It operates b/w -55°C to 125°C, supporting a data rate of 2 Mbps at a supply voltage of 5V. Ideal for automotive applications due to its MILITARY temperature grade and small outline package design.

TCAN337GDR

Texas Instruments

TCAN337GDR by Texas Instruments is an automotive-grade network interface IC with 8 terminals, operating at -40 to 125°C. It features a data rate of 5 Mbps, terminal pitch of 1.27 mm, and nominal voltage of 3.3 V. Ideal for telecom applications requiring small outline packages and surface mount capabilities.

PCA82C251T/YM

NXP Semiconductors

PCA82C251T/YM by NXP Semiconductors is a CAN transceiver with 8 terminals, operating from -40 to 125°C. It has a supply voltage of 5V and max current of 78mA, suitable for automotive applications. The package is small outline, surface mountable, with Gull Wing terminals.

TJA1028T/3V3/20/1J

NXP Semiconductors

NXP Semiconductors' TJA1028T/3V3/20/1J is a LIN transceiver with 8 terminals, operating voltage of 3.3V, and max supply current of 4.5mA. It has AEC-Q100 screening level for automotive applications, with temp range from -40 to 150°C. Package style is small outline, suitable for surface mount assembly in compact designs.

KSZ8041TLI-S

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;

PCA82C250TD-T

NXP Semiconductors

PCA82C250TD-T by NXP Semiconductors is an 8-terminal interface circuit with a supply voltage of 5V. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for automotive network interfaces. The package is small outline, surface-mountable, and has a terminal finish of nickel palladium gold.

TCAN332DR

Texas Instruments

TCAN332DR by Texas Instruments is a network interface IC with 1 channel and a data rate of 1 Mbps. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is commonly used in automotive applications.