Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SP3072EEN-L

Manufacturer

Sipex
Manufacturer's Part Number

SP3072EEN-L
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

1N4148

Good-ark Electronics

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

1N4148

Surge Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM7805CT

Fairchild Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148W-7-F

Diodes Incorporated

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

Details

2N2222A

Raytheon Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;

Details

LM317BD2TG

Onsemi

LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

1N4148WT

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;

Details

OHN3020U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

Details

SP3072EEN-L Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	1.5 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1.5 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-422; EIA-485; TIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Maximum Output Low Current:	1 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	1500 ns
Package Equivalence Code:	SOP8,.25
Receiver No. of Bits:	1
Length:	4.9 mm
Maximum Receive Delay:	200 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3

Category Top Products

ADM1485ARZ

Analog Devices

ADM1485ARZ by Analog Devices is a BICMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has 8 terminals, and offers differential outputs. Ideal for industrial applications requiring reliable communication over short distances with low power consumption.

MAX485EESA+T

Analog Devices

MAX485EESA+T by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has 8 terminals, and offers differential outputs. With a small outline package, it's ideal for industrial applications requiring fast data transmission with low power consumption.

SN65HVD75D

Texas Instruments

SN65HVD75D by Texas Instruments is a line driver/receiver with 8 terminals, operating at 3.3V power supply. It features EIA-422/EIA-485 interface standards, differential output, and a max transmit delay of 17ns. Ideal for automotive applications due to its wide temperature range from -40°C to 125°C.

SN65HVD78DR

Texas Instruments

SN65HVD78DR by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 15ns max transmit delay, and 8 terminals. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C and features differential output with EIA-422/EIA-485 interface standards.

LTM2881MPY-3#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 32; Package Code: BGA; Package Shape: RECTANGULAR;

MAX3232IDBR

Texas Instruments

MAX3232IDBR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 3.6 V and peak reflow temperature of 260 C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in industrial applications due to its inverted output polarity and Schmitt trigger input characteristics.

THVD2450DR

Texas Instruments

THVD2450DR by Texas Instruments is a line driver/receiver with 8 terminals, operating at -40 to 125°C. It supports EIA-422-B, TIA-422-B, EIA-485-A, and TIA-485-A standards with differential output and Schmitt trigger input. Ideal for automotive applications due to its compact size (4.905mm x 3.895mm) and low supply voltage requirements (3V to 5.5V).

SN65C3232EPWR

Texas Instruments

SN65C3232EPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V power supplies. It features EIA-232 interface standard, Schmitt trigger input characteristics, and inverted output polarity. Ideal for industrial applications requiring reliable data transmission over short distances.

SP3485EN-L

Sipex

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN75176BD

Texas Instruments

SN75176BD by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max supply voltage of 5.25V, transmit delay of 22ns, and operates in commercial temperature range. Ideal for EIA-422-B, TIA-422-B, EIA-485-A interfaces in various applications requiring bipolar technology and differential output.

MAX256ASA+T

Analog Devices

MAX256ASA+T by Analog Devices is a Line Driver IC with 8 terminals, operating voltage of 3-5.5V, and BICMOS technology. It has a small outline package suitable for automotive applications, with dual terminal position and matte tin finish. The IC offers standard input characteristics and zero receive delay, making it ideal for high-speed data transmission in various electronic systems.

MAX232ACSE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ADM202EARNZ-REEL7

Analog Devices

ADM202EARNZ-REEL7 by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 4.5-5.5V. It has a max transmit delay of 1500ns and receive delay of 1000ns, suitable for industrial applications requiring EIA-232-E interface standard compliance. The IC features CMOS technology, Schmitt trigger input characteristics, and operates in the -40 to 85°C temperature range.

SN65LVDS4RSET

Texas Instruments

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR;

SN65LBC176DRG4

Texas Instruments

SN65LBC176DRG4 by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 25ns max transmit delay, and 33ns max receive delay. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482 interface standards in a compact small outline package.

SN75176BP

Texas Instruments

SN75176BP by Texas Instruments is a line driver/receiver with 5V supply, 22ns transmit delay, and 35ns receive delay. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A interfaces in commercial temperature applications.

LTC1535ISW#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3280EAUK-T

Maxim Integrated

MAX3280EAUK-T by Maxim Integrated is a Line Receiver IC with 5V supply, 15mA max current, and 15ns receive delay. It operates in automotive-grade temperatures (-40 to 125°C) and interfaces with EIA-422/EIA-485 standards. Ideal for applications requiring differential Schmitt trigger input characteristics.

MAX233ACWP+G36

Maxim Integrated

MAX233ACWP+G36 by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 4.75-5.25V. It has a max transmit delay of 3500ns and receive delay of 1000ns, suitable for EIA-232-E, TIA-232-E interfaces in commercial temperature applications.

STR485LVQT

STMicroelectronics

LINE TRANSCEIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;