Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

FC-13532.7680KA-AG0

Manufacturer

Seiko Epson
Manufacturer's Part Number

FC-13532.7680KA-AG0
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: .032768 MHz; Terminal Finish: GOLD OVER NICKEL;
Datasheet

Datasheet

Not In Stock

Popular Products

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

SMBJ18CA

General Instrument

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

M39029/58-360

Molex

CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;

Details

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317LMX/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

1N4148

Invensys Sensor Systems

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

BSS138

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

1N4148

First Components International

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;

Details

FC-13532.7680KA-AG0 Technical Details

TYPE	DESCRIPTION
Load Capacitance:	7 pF
Frequency Tolerance:	20 ppm
Frequency Stability:	144 %
Series Resistance:	70000 ohm
Terminal Finish:	GOLD OVER NICKEL
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	.5 uW
Nominal Operating Frequency:	.032768 MHz
Aging:	3 PPM/FIRST YEAR
Physical Dimension:	3.2mm x 1.5mm x 0.8mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	TS 16949
Maximum Operating Temperature:	85 Cel

Category Top Products

LFXTAL003206BULK

Iqd Frequency Products

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Nominal Operating Frequency: 12 MHz; JESD-609 Code: e3/e1;

ATS12A

Cts

The Cts ATS12A crystal oscillator operates at 12 MHz with a frequency tolerance of 30 ppm and stability of 50%. Ideal for applications requiring precise timing, it features a parallel fundamental type, through-hole mounting, and low aging rate of 5 PPM/year.

ABM8G-12.000MHZ-18-D-2-Y-T

Abracon

ABM8G-12.000MHZ-18-D-2-Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems. Operating temperature range from -40 to 85 °C with surface mount feature for easy installation.

ABM8-32.000MHZ-B2-T3

Abracon

ABM8-32.000MHZ-B2-T3 by Abracon is a 32 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.

ABS05-32.768KHZ-T5

Abracon

Abracon's ABS05-32.768KHZ-T5 crystal oscillator offers 20 ppm frequency tolerance, 72% stability, and 90000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and wearables due to its compact size (1.6mm x 1mm x 0.5mm) and low drive level (0.5 uW).

7B-24.000MAAJ-T

Txc

7B-24.000MAAJ-T by Txc is a 24 MHz Crystal Oscillator with 30 ppm Frequency Tolerance, 30% Stability, and 40 ohm Series Resistance. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -20 to 70 °C operating range and low aging rate of 3 PPM/YEAR.

ABS05-32.768KHZ-X-T5

Abracon

Abracon's ABS05-32.768KHZ-X-T5 crystal oscillator offers 20 ppm frequency tolerance, 72% stability, and 90000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as IoT devices or precision timing systems.

405I35B12M00000

Cts

Cts 405I35B12M00000 crystal oscillator offers 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring a 12 MHz nominal operating frequency, with -40 to 85 °C temperature range. Features include GOLD OVER NICKEL finish, PARALLEL - FUNDAMENTAL type, and compact 5mm x 3.2mm x 0.85mm dimensions.

9HT10-32.768KDZF-T

Txc

9HT10-32.768KDZF-T by Txc is a 0.032768 MHz Crystal Oscillator with 20 ppm Frequency Tolerance and 108% Frequency Stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, it features a compact size of 3.2mm x 1.5mm x 0.75mm for surface mount installations.

ABM3-12.000MHZ-D2Y-T

Abracon

ABM3-12.000MHZ-D2Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features nickel gold terminal finish.

ECS-.327-12.5-16-TR3

Ecs International

ECS-0.327-12.5-16-TR3 by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz frequency, such as in telecommunications and industrial automation systems.

MC-14632.7680KA-A0:ROHS

Seiko Epson

MC-14632.7680KA-A0:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, it operates b/w -40 to 85 °C and features Tin/Bismuth terminal finish.

ABM8W-37.4000MHZ-6-K2Z-T3

Abracon

ABM8W-37.4MHz crystal oscillator by Abracon offers 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing at a nominal frequency of 37.4 MHz, with a low drive level of 10 uW and surface mounting feature.

LFXTAL003004BULK

Iqd Frequency Products

LFXTAL003004BULK by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 50000 ohm series resistance, and -40 to 85 °C operating temperature range. It is ideal for applications requiring precise timing such as in telecommunications, industrial automation, and consumer electronics.

RH100-25.000-12-F-1010-TR

Raltron Electronics

Raltron Electronics' RH100-25.000-12-F-1010-TR crystal oscillator offers 10 ppm frequency tolerance, 10% stability, and 60 ohm series resistance. Ideal for applications requiring precise timing at a nominal operating frequency of 25 MHz.

ECS-.327-7-12-TR

Ecs International

ECS-0.327-7-12-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as telecommunications and industrial automation. Features gold terminal finish, surface mounting, and operates b/w -40 to 85 °C.

LFXTAL003004REEL

Iqd Frequency Products

LFXTAL003004REEL by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 50000 ohm series resistance, and -40 to 85 °C operating temperature range. It is ideal for applications requiring precise timing such as telecommunications equipment and industrial automation systems.

ABM11-24.000MHZ-D2X-T3

Abracon

ABM11-24.000MHZ-D2X-T3 by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features nickel gold terminal finish for surface mounting.

ECS-.327-12.5-12R-TR

Ecs International

ECS-0.327-12.5-12R-TR by Ecs International is a 0.032768 MHz crystal oscillator with 20 ppm frequency tolerance and 129% stability. Ideal for applications requiring precise timing in temperatures ranging from -40 to 85 °C, it features a surface mount design, gold terminal finish, and low drive level of 1 uW.

HC49S-4-20-50-60-30-ATF

Multicomp Pro

HC49S-4-20-50-60-30-ATF by Multicomp Pro is a 4 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -10°C to 60°C with a low aging rate of 5 PPM/year.