Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ECS-320-8-37B-CKY-TR

Manufacturer

Ecs International
Manufacturer's Part Number

ECS-320-8-37B-CKY-TR
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 1 PPM/FIRST YEAR; Minimum Operating Temperature: -30 Cel; Series Resistance: 50 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;

Details

SMBJ18CA

First Components International

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

1N4148

Frontier Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

SMBJ18CA

Diodes Incorporated

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

EU2B-YS2J03C

Idec

ROTARY SWITCH;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

STM32H743ZIT6

STMicroelectronics

STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.

Details

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

1N4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

IRLML6402TRPBF

International Rectifier

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;

Details

SS14

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

International Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

OPA2277UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

CRCW04020000Z0EDHP

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

ECS-320-8-37B-CKY-TR Technical Details

TYPE	DESCRIPTION
Load Capacitance:	8 pF
Other Names:	XC3067CT XC3067TR XC3067DKR
Frequency Tolerance:	10 ppm
Frequency Stability:	10 %
Series Resistance:	50 ohm
Terminal Finish:	Gold (Au) - with Nickel (Ni) barrier
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	100 uW
Nominal Operating Frequency:	32 MHz
Aging:	1 PPM/FIRST YEAR
Physical Dimension:	2.0mm X 1.6mm X 0.45mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	85 Cel

Category Top Products

RH100-12.000-10-2020-EXT-TR

Raltron Electronics

Raltron Electronics' RH100-12.000-10-2020-EXT-TR crystal oscillator offers 20 ppm frequency tolerance, 20% stability, and 100 ohm series resistance. Ideal for applications requiring a 12 MHz operating frequency, such as telecommunications equipment and industrial automation systems.

402F25033CJR

Cts

The Cts 402F25033CJR is a crystal oscillator with a frequency tolerance of 30 ppm and stability of 30%. It operates at a nominal frequency of 25 MHz and has a physical dimension of 2mm x 1.6mm x 0.55mm. This oscillator is suitable for applications requiring precise timing and frequency control.

ECS-.327-12.5-17X-C-TR

Ecs International

ECS-0.327-12.5-17X-C-TR by Ecs International is a crystal oscillator with 10 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.

405I35B12M00000

Cts

Cts 405I35B12M00000 crystal oscillator offers 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring a 12 MHz nominal operating frequency, with -40 to 85 °C temperature range. Features include GOLD OVER NICKEL finish, PARALLEL - FUNDAMENTAL type, and compact 5mm x 3.2mm x 0.85mm dimensions.

ATS-49-R11.0592MHZ

Mtronpti

ATS-49-R11.0592MHZ by Mtronpti is a crystal oscillator with 11.0592 MHz frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -10 to 70 °C, it features through-hole mounting and low aging rate of 5 PPM/year.

NX5032GA-8.000M-STD-CSU-1

Nihon Dempa Kogyo

NX5032GA-8.000M-STD-CSU-1 by Nihon Dempa Kogyo is an 8 MHz crystal oscillator with 50 ppm frequency tolerance and 150% stability. Ideal for applications requiring a surface mount, it operates b/w -40 to 150 °C, with a drive level of 10 uW.

ECS-120-20-4XDN

Ecs International

ECS-120-20-4XDN by Ecs International is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 100% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel-fundamental crystal type. With through-hole mounting and compact dimensions of L10.5XB4.65XH3.5 (mm), it offers reliable performance in various electronic devices.

RT3215-32.768-12.5-TR-NS19

Raltron Electronics

Raltron Electronics' RT3215-32.768-12.5-TR-NS19 is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, such as IoT devices due to its compact size of 3.2mm x 1.5mm x 0.8mm and low drive level of 1 uW.

XRCGB24M000F0L00R0

Murata Manufacturing

Murata Manufacturing's XRCGB24M000F0L00R0 crystal oscillator operates at 24 MHz with 100 ppm frequency tolerance and 50% stability. Ideal for surface mount applications, it features a series resistance of 150 ohm and load capacitance of 6 pF.

FX135A-327-T3

Fox Electronics

FX135A-327-T3 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 162% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85°C make it suitable for various environments.

XRCGB27M120F2P10R0

Murata Manufacturing

Murata Manufacturing's XRCGB27M120F2P10R0 crystal oscillator operates at 27.12 MHz with a frequency tolerance of 20 ppm and stability of 20%. Suitable for applications requiring precise timing, it features a low aging rate of 5 PPM/YEAR and surface mounting feature.

ABM3C-24.000MHZ-D4Y-T

Abracon

ABM3C-24.000MHZ-D4Y-T by Abracon is a 24 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, such as telecommunications equipment and industrial automation systems.

MC-30632.7680K-AG:ROHS

Seiko Epson

MC-30632.7680K-AG:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. It operates at 0.032768 MHz, suitable for applications requiring precise timing in temperature ranges from -40 to 85 °C. Ideal for surface mount setups due to its compact size of 8mm x 3.2mm x 2.54mm.

ABS10-32.768KHZ-7-T

Abracon

Abracon's ABS10-32.768KHZ-7-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

ATS120BSM-1E

Cts

Cts ATS120BSM-1E crystal oscillator offers 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a 12 MHz nominal operating frequency in a compact surface mount package.

MC-30632.7680K-AG3:PURESN

Seiko Epson

MC-30632.7680K-AG3:PURESN by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as in surface mount devices for temperature-sensitive environments.

ABLS2-25.000MHZ-2X-F-T

Abracon

Abracon's ABLS2-25.000MHZ-2X-F-T crystal oscillator operates at 25 MHz with 20 ppm frequency tolerance and 20% stability. Ideal for surface mount applications, it features a parallel fundamental type design, 40 ohm series resistance, and matte tin terminal finish.

ABS05W-32.768KHZ-K-2-T

Abracon

Abracon's ABS05W-32.768KHZ-K-2-T crystal oscillator offers 20 ppm frequency tolerance, 400% stability, and 65000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency with -40 to 125 °C operating range.

XRCGB32M000F2P00R0

Murata Manufacturing

XRCGB32M000F2P00R0 by Murata Manufacturing is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 20%. It has a series resistance of 100 ohm and is suitable for applications requiring a nominal operating frequency of 32 MHz.

TSX-322524.0000MF15X-AC3

Seiko Epson

The Seiko Epson TSX-322524.0000MF15X-AC3 is a crystal oscillator with a frequency tolerance of 10 ppm and series resistance of 40 ohm. It is commonly used in applications requiring a nominal operating frequency of 24 MHz, such as surface mount devices.