Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

HFA3135IHZ96

Manufacturer

Renesas Electronics
Manufacturer's Part Number

HFA3135IHZ96
Description

PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 7000 MHz; Maximum Collector Current (IC): .026 A; Maximum Collector-Base Capacitance: .4 pF;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

Details

PIC18F4550-I/PT

Microchip Technology

PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

STM32F407VGT6

STMicroelectronics

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

SS14

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720A-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CL10B104KB8NNNC

Samsung Electro-mechanics

CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

2N2222A

North American Philips Discrete Products Div

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

HFA3135IHZ96 Technical Details

TYPE	DESCRIPTION
Nominal Transition Frequency (fT):	7000 MHz
Package Body Material:	PLASTIC/EPOXY
Maximum Collector Current (IC):	.026 A
Maximum Time At Peak Reflow Temperature (s):	30
Configuration:	SEPARATE, 2 ELEMENTS
Transistor Element Material:	SILICON
Transistor Application:	AMPLIFIER
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	6
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G6
No. of Elements:	2
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Highest Frequency Band:	ULTRA HIGH FREQUENCY BAND
Maximum Operating Temperature:	85 Cel
Moisture Sensitivity Level (MSL):	2
Polarity or Channel Type:	PNP
Minimum DC Current Gain (hFE):	15
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Maximum Collector-Emitter Voltage:	4 V
Additional Features:	LOW NOISE
Maximum Collector-Base Capacitance:	.4 pF
Peak Reflow Temperature (C):	260
Maximum VCEsat:	.25 V

Category Top Products

JANTXV2N2907AL

Vpt Components

PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .6 A; Terminal Position: BOTTOM; Peak Reflow Temperature (C): NOT SPECIFIED;

BFQ256-T

NXP Semiconductors

PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1300 MHz; Maximum Collector Current (IC): .3 A; Terminal Position: SINGLE;

BFR93AR

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .035 A;

MMPQ2369R2G

Onsemi

The Onsemi MMPQ2369R2G is a NPN RF BJT with 4 elements, suitable for switching applications. It has a max collector-emitter voltage of 15V, max operating temp of 150 °C, and fT of 550MHz. This transistor comes in a small outline package with Gull Wing terminals for surface mount assembly.

2N3137

STMicroelectronics

2N3137 by STMicroelectronics is an NPN RF BJT designed for amplifier applications. It features a max power dissipation of 2W, operates up to 175 °C, and has a nominal transition frequency of 750 MHz. Ideal for very high-frequency circuits, it ensures reliable performance.

MCH4020-TL-H

Onsemi

The Onsemi MCH4020-TL-H is an NPN RF BJT with a max power dissipation of 0.4W, fT of 13GHz, and hFE of 60. Ideal for high-frequency applications in surface-mount configurations, it operates up to 150°C with a max collector current of 0.15A.

MMBTH10RG

Onsemi

MMBTH10RG by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 40V and a transition frequency of 450MHz. It is ideal for amplifier applications in the ultra-high-frequency band, featuring a small outline package with gull wing terminals for surface mount assembly. With a DC current gain of at least 50 and a max power dissipation of 0.225W, this transistor operates efficiently at temperatures up to 150°C.

BFU530AR

NXP Semiconductors

The NXP Semiconductors BFU530AR is a RF BJT transistor with NPN polarity, suitable for amplifier applications in the L Band. It has a max collector-emitter voltage of 12V, collector current of 0.04A, and transition frequency of 11GHz. This surface-mount device comes in a small outline package with Gull Wing terminals.

SMMBT918LT1

Onsemi

SMMBT918LT1 by Onsemi is a NPN RF BJT transistor with 3 terminals, suitable for amplifier applications in the ultra-high frequency band. It has a max collector-emitter voltage of 15V, collector current of 0.05A, and transition frequency of 600MHz. The package is surface mountable with Gull Wing terminals in a small outline style.

EMX5T2R

ROHM

ROHM's EMX5T2R is a NPN BJT with 2 elements, ideal for amplifier applications. It features a max collector-emitter voltage of 11V, fT of 3200MHz, and hFE min of 27. With a small outline package style and surface mount capability, it offers high performance in compact designs.

BFR360FH6327XTSA1

Infineon Technologies

BFR360FH6327XTSA1 by Infineon Technologies is a NPN RF BJT transistor with a max fT of 14GHz. It is designed for amplifier applications in the S Band frequency range. This small outline package has a max operating temp of 150°C and collector-emitter voltage of 6V, making it suitable for high-frequency amplification needs.

CA3083M96

Rochester Electronics

NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 450 MHz; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified;

MPSH11RLRM

Onsemi

MPSH11RLRM by Onsemi is an NPN RF BJT with a max fT of 650 MHz, VCEO of 25V, and Ccb of 0.7 pF. Ideal for UHF applications due to its high frequency band capability and cylindrical package style. Operates at up to 150 °C making it suitable for various electronic designs.

HFA3127B

Intersil

Intersil's HFA3127B is an NPN BJT transistor with 5 elements, ideal for amplifier applications in the ultra-high frequency band. With a max fT of 8000 MHz and IC of 0.037 A, this transistor features a Gull Wing terminal form and small outline package style for surface mount assembly.

MPS918G

Onsemi

MPS918G by Onsemi is an NPN BJT transistor with a max. collector-emitter voltage of 15V and fT of 600MHz. Ideal for amplifier applications, it has a max. power dissipation of 0.625W and operates at up to 150 °C. The package style is cylindrical with through-hole terminals, making it suitable for ultra-high frequency band circuits.

MPSH81ZL1

Onsemi

MPSH81ZL1 by Onsemi is a PNP RF BJT transistor with 3 terminals in a cylindrical package. It has a max collector-emitter voltage of 20V, fT of 600MHz, and low 0.85pF C-B capacitance. Ideal for amplifier applications due to its silicon element material and through-hole terminal form.

2N5090

Onsemi

The Onsemi 2N5090 is an NPN RF BJT with a max. collector-emitter voltage of 30V and max. collector current of 0.4A, ideal for ultra-high frequency band applications. Featuring a silicon transistor element, it has a nominal transition frequency of 500MHz, making it suitable for high-frequency signal amplification in RF circuits. The package style is post/stud mount with a round shape and isolated case connection.

SD1415

STMicroelectronics

NPN; Surface Mount: NO; Maximum Power Dissipation (Abs): 85 W; Maximum Collector Current (IC): 7 A; Transistor Element Material: SILICON;

BF240

Onsemi

BF240 by Onsemi is a NPN BJT transistor with 3 terminals in a cylindrical package. It has a max collector-emitter voltage of 40V, max collector current of 0.025A, and fT of 600MHz. Ideal for amplifier applications due to its high transition frequency and low collector-base capacitance.

2N4401

Thomson-csf Semiconductors

NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Package Shape: ROUND; No. of Elements: 1;