Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1803426

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1803426
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: UL 94V-0, PBT, SAFETY APPROVAL: VDE; Wire Gauge: 15 AWG; Voltage (Rated): 160 V;
Datasheet

Datasheet

Not In Stock

Popular Products

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

SS14

Hy Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

STM32H743IIT6

STMicroelectronics

STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

SS14

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1554216004

Molex

WIRE AND CABLE;

Details

SMMBT2222ALT1G

Onsemi

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

Details

1N4148

ROHM

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56351

Souriau

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;

Details

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

Details

1803426 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	1.5 mm²
No. of Decks:	1
Current (Rated):	8 A
Fastening Method:	Connector
Voltage (Rated):	160 V
Additional Features:	Standard: UL 94V-0, PBT, Safety Approval: VDE
No. of Rows:	1
No. of Ways:	2
Mounting Type:	Board
Terminal & Terminal Block Type:	Barrier Strip Terminal Block
Safety Approval:	CB; CCA; CSA; CUL; EAC; UL
Wire Gauge:	15 AWG

Category Top Products

8-31890-1

TE Connectivity

TE Connectivity 8-31890-1 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 1.42 mm2, it is ideal for various terminal block applications in electrical systems.

MS25036-123

Defense Logistics Agency

LUG TERMINAL; Wire Gauge: 4 AWG;

2-520129-2

TE Connectivity

TE Connectivity's 2-520129-2 PUSH-ON TERMINAL is UL approved for 600V, 18 AWG wires. With 0.82 mm2 wire cross section, it's ideal for female terminals in various applications.

B-008-11

TE Connectivity

SPLICE TERMINAL; Mounting Type: CABLE; Wire Gauge: 24 AWG; Safety Approval: UL; Wire Cross Section: .25 mm2;

MSTBVA2,5/3-G-5,08

Phoenix Contact

Phoenix Contact's MSTBVA2,5/3-G-5,08 is a 3-way strip terminal block with a rated voltage of 320V and current of 12A. It is approved by CB, CCA, CSA, CUL, EAC, and UL for safety. Ideal for board mounting applications using connector fastening method.

190030001

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE;

2-282836-2

TE Connectivity

TE Connectivity 2-282836-2 is a modular terminal block with 21 ways for BOARD mounting. Rated at 300V, it handles 15 AWG wire and supports 1.5mm² wire cross section. UL approved, it can carry up to 13.5A current making it ideal for various industrial applications.

1757022

Phoenix Contact

Phoenix Contact 1757022 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 12A current and 320V voltage. It uses SCREW fastening method and supports wire gauge up to 12 AWG (2.5 mm²). Ideal for industrial applications requiring secure electrical connections.

1SNK705010R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Current (Rated): 20 A; No. of Ways: 1;

51863-4

TE Connectivity

TE Connectivity 51863-4 is a UL-approved FEMALE RING TERMINAL for 18 AWG wire with a rated voltage of 300V. Its 0.96 mm2 wire cross section makes it ideal for various electrical applications requiring secure connections and reliable performance.

770904-1

Tyco Electronics Amp

WIRE TERMINAL; Wire Gauge: 22 AWG; Manufacturer Series: 770904; Wire Cross Section: .9 mm2; Terminal Gender: FEMALE;

2-320569-3

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;

8-36160-1

TE Connectivity

RING TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; No. of Ways: 1; Safety Approval: UL;

3002

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

190190025

Molex

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Manufacturer Series: 19019; Wire Cross Section: 2.5 mm2;

2-34124-1

TE Connectivity

RING TERMINAL; Wire Gauge: 16 AWG; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 2 mm2;

1303-0-15-80-16-14-04-0

Mill-max Mfg

PCB TERMINAL; Manufacturer Series: 1303-0-15-80-16-14-04-0;

1777099

Phoenix Contact

Phoenix Contact 1777099 is a STRIP TERMINAL BLOCK with 4 ways, rated for 12A current and 320V voltage. It has CB, CCA, CSA safety approvals and accepts wire gauge up to 13 AWG. Ideal for BOARD mounting applications requiring secure connections with wire cross section of 2.5 mm2.

8-640905-1

Tyco Electronics Amp

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: 2.62 mm2;

852

Keystone Electronics

WIRE TERMINAL;