Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

NKS7-120-20

Manufacturer

Pericom Semiconductor
Manufacturer's Part Number

NKS7-120-20
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 50 ppm; Physical Dimension: L7.2XB5.2XH1.3 (mm)/L0.284XB0.205XH0.051 (inch); Minimum Operating Temperature: -20 Cel; Load Capacitance: 20 pF;
Datasheet

Datasheet

Not In Stock

Popular Products

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

1N4148WT

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Air Electro

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM7805CT

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

BAV99

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

ROHM

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Continental Device India

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

M39029/58-360

Tri-star Electronics International

CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

1N4148

Rectron

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

06035C104KAT2A

KYOCERA AVX

06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

DS18B20Z/T&R

Maxim Integrated

DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.

Details

2N2222A

Asi Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

NKS7-120-20 Technical Details

TYPE	DESCRIPTION
Load Capacitance:	20 pF
Other Names:	NKS7-120-20-ND 31-NKS7-120-20TR 31-NKS7-120-20CT 31-NKS7-120-20DKR
Frequency Tolerance:	50 ppm
Frequency Stability:	50 %
Terminal Finish:	Gold (Au)
JESD-609 Code:	e4
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	100 uW
Nominal Operating Frequency:	12 MHz
Physical Dimension:	L7.2XB5.2XH1.3 (mm)/L0.284XB0.205XH0.051 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	LOAD CAPACITANCE 8 TO 32 PF; AT CUT CRYSTAL
Manufacturer Series:	NKS7
Maximum Operating Temperature:	70 Cel

Category Top Products

RH100-25.000-12-F-1010-TR

Raltron Electronics

Raltron Electronics' RH100-25.000-12-F-1010-TR crystal oscillator offers 10 ppm frequency tolerance, 10% stability, and 60 ohm series resistance. Ideal for applications requiring precise timing at a nominal operating frequency of 25 MHz.

MC-40532.7680K-A0

Seiko Epson

MC-40532.7680K-A0 by Seiko Epson is a crystal oscillator with 100 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as in telecommunications and consumer electronics due to its compact size (9.6mm X 4.06mm X 3.6mm) and surface mount feature.

LFXTAL003206

Iqd Frequency Products

Quartz Crystals;

CM315D32768DZCT

Citizen Finedevice

Citizen Finedevice's CM315D32768DZCT crystal oscillator offers 20 ppm frequency tolerance, 70000 ohm series resistance, and 0.032768 MHz nominal operating frequency. Ideal for applications requiring precise timing in a compact form factor, such as IoT devices and wearables.

HC49S-4-20-50-60-30-ATF

Multicomp Pro

HC49S-4-20-50-60-30-ATF by Multicomp Pro is a 4 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -10°C to 60°C with a low aging rate of 5 PPM/year.

FA-128320000MF10Z-AJ3

Seiko Epson

FA-128320000MF10Z-AJ3 by Seiko Epson is a 32 MHz crystal oscillator with a frequency tolerance of 10 ppm and stability of 10%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.

TSX-322538.4000MF10Z-AS3

Seiko Epson

TSX-322538.4000MF10Z-AS3 by Seiko Epson is a 38.4 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing in temperature range of -20 to 75 °C, such as telecommunications equipment and industrial automation systems.

ABM13W-80.0000MHZ-5-N2Z-T5

Abracon

ABM13W-80.0000MHZ-5-N2Z-T5 by Abracon is a 80 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and high performance.

MC-40532.7680K-A0:PURESN

Seiko Epson

MC-40532.7680K-A0:PURESN by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount setups with -40 to 85 °C operating range.

RT3215-32.768-12.5-TR-NS3

Raltron Electronics

Raltron Electronics' RT3215-32.768-12.5-TR-NS3 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and wearables due to its compact size of 3.2mm x 1.5mm x 0.9mm and low drive level of 0.5 uW.

A-4.000-18

Raltron Electronics

Raltron Electronics' A-4.000-18 crystal oscillator offers 50 ppm frequency tolerance, 100% stability, and 80 ohm series resistance. Ideal for applications requiring a 4 MHz nominal operating frequency, such as industrial automation and telecommunications systems.

ECS-.327-6-12-TR

Ecs International

ECS-0.327-6-12-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in temperatures ranging from -40 to 85 °C. Suitable for surface mount setups due to its compact L2.0XB1.2XH0.6 (mm) size.

NX3225SA-12.000M-STD-CRS-2

Nihon Dempa Kogyo

NX3225SA-12.000M-STD-CRS-2 by Nihon Dempa Kogyo is a crystal oscillator with a frequency tolerance of 15 ppm and frequency stability of 50%. It has a series resistance of 120 ohm and is suitable for surface mount applications.

FC-13532.7680KA-A

Seiko Epson

Seiko Epson's FC-13532.7680KA-A crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.

ATS12A

Cts

The Cts ATS12A crystal oscillator operates at 12 MHz with a frequency tolerance of 30 ppm and stability of 50%. Ideal for applications requiring precise timing, it features a parallel fundamental type, through-hole mounting, and low aging rate of 5 PPM/year.

ABM8AIG-32.000MHZ-12-2Z-T3

Abracon

ABM8AIG-32.000MHZ-12-2Z-T3 by Abracon is a 32 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 125 °C, such as telecommunications equipment and industrial automation systems.

ABS07-32.768KHZ-9-4-T

Abracon

Abracon's ABS07-32.768KHZ-9-4-T crystal oscillator offers 30 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in environments ranging from -40 to 85 °C.

Q13MC3061000300

Seiko Epson

Seiko Epson's Q13MC3061000300 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 35000 ohm series resistance. Ideal for applications requiring precise timing at frequencies up to 0.032768 MHz. Suitable for surface mount installations with a temperature range of -40 to 85 °C.

ABM3B-14.31818MHZ-B-2-T

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Physical Dimension: L5.0XB3.2XH1.1 (mm)/L0.197XB0.126XH0.043 (inch); Nominal Operating Frequency: 14.31818 MHz;

405I35B33M00000

Cts

405I35B33M00000 by Cts is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring precise timing at 33 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C.