46999-0101 by Molex

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
1,631	$0.090	$147.198

46999-0101

Manufacturer

Molex
Manufacturer's Part Number

46999-0101
Description

CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Material: BRASS; Maximum Cable Entry: .06 inch; Terminal Type: CRIMP; Assembly Item Name: CONTACT;
Datasheet

Datasheet

1631 In Stock

Popular Products

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV303N

Onsemi

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

LL4148

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148W-T

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

1N4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Raytheon Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;

Details

2N7002

Nte Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

46999-0101 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Other Names:	7879-1(P154)L 46999-0101 469990101 WM5268 046999-0101
Usage:	7880 SERIES HOUSING
Maximum Wire Size:	24 AWG
Contact Design:	LOOSE
Contact Style:	COMPRESSION
Terminal Type:	CRIMP
IEC Conformity:	NO
Material:	BRASS
Minimum Wire Size:	30 AWG
MIL Conformity:	NO
Finish Thickness:	100
Terminal Length:	.186 inch
Contact Gender:	FEMALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CONTACT
Additional Features:	CONTACT FINISH: TIN (100) OVER NICKEL (50)
DIN Conformity:	NO
Maximum Cable Entry:	.06 inch

Category Top Products

927771-3 by TE Connectivity

927771-3

TE Connectivity

TE Connectivity's 927771-3 is a CRIMP terminal with stamped contact design. It has a wire gauge of 17 AWG, rated for 30A current. Ideal for power applications, it can accommodate cables from 0.055 to 0.09 inch and operates b/w -40 to 130°C.

206966-9 by TE Connectivity

206966-9

TE Connectivity

TE Connectivity 206966-9 is an Assembly Product with 13 shell sizes. It supports up to 0 AWG wire size and features a STRAIGHT mounting style. Made of POLYETHYLENE, it offers SCREW mounting options and is ideal for applications requiring 3/4-20 UNEF-2B compatibility.

9004440000 by Weidmueller & Kg

9004440000

Weidmueller & Kg

TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: FERRULE; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 20 AWG;

16-02-0083 by Molex

16-02-0083

Molex

Molex 16-02-0083 is a CRIMP CONTACT for 24-30 AWG wires, FEMALE gender, SQUARE PIN-SOCKET style. Used in Assembly Products with STRAIGHT mounting style for various applications.

1-963530-1 by TE Connectivity

1-963530-1

TE Connectivity

CONNECTOR ACCESSORY;

796075-1 by TE Connectivity

796075-1

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 105 Cel; Contact Gender: MALE; Maximum Wire Size: 0 AWG;

221-513/000-004 by Wago

221-513/000-004

Wago

TERMINAL BLOCK ACCESSORY;

M23053/16-004-0 by 3m Electronic Products Division

M23053/16-004-0

3m Electronic Products Division

ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;

48099-4000 by Molex

48099-4000

Molex

CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 67910-0002;

08-50-0106 by Molex

08-50-0106

Molex

Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.

348461-1 by TE Connectivity

348461-1

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Maximum Operating Temperature: 180 Cel;

50837-8000 by Molex

50837-8000

Molex

The Molex 50837-8000 is a CRIMP terminal with CHAIN contact design. It supports wire sizes from 28 AWG to 22 AWG and cable entries up to 0.071". Ideal for applications requiring MALE contacts, such as straight mounting in assembly products.

0460-204-08141 by TE Connectivity

0460-204-08141

TE Connectivity

TE Connectivity's 0460-204-08141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55°C to 125°C, suitable for wire sizes ranging from 10 AWG to 8 AWG. With a rated current of 60 A, it is ideal for high-power applications requiring reliable male contacts.

14 by TE Connectivity

14

TE Connectivity

TERMINAL BLOCK ACCESSORY; Usage: 100 SERIES TERMINAL BLOCK, MINIATURE & SINGLE TIER; Assembly Item Name: GANGING ROD;

0413-217-1605 by TE Connectivity

0413-217-1605

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Design: POWER AND SIGNAL;

249-120 by Wago

249-120

Wago

TERMINAL BLOCK ACCESSORY;

87421-0000 by Molex

87421-0000

Molex

Molex 87421-0000 CONTACT features CRIMP terminal type, FEMALE gender, and 0.098" terminal length. Ideal for 26 AWG wire in assembly product applications like 87439 with STRAIGHT mounting style.

828920-1 by TE Connectivity

828920-1

TE Connectivity

CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;

02-09-1119 by Molex

02-09-1119

Molex

Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.

15305171 by Aptiv

15305171

Aptiv

CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SEAL PLUG;