Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

190070041

Manufacturer

Molex
Manufacturer's Part Number

190070041
Description

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Manufacturer Series: 19007; Terminal Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

BSS138

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

M24308/2-1F

Tyco Electronics Amp

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Zetex Plc

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

Details

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Air Electro

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

SMBJ18CA

Fagor Electronica S Coop

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Fairchild Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDN5618P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;

Details

190070041 Technical Details

TYPE	DESCRIPTION
Terminal Gender:	Female
Manufacturer Series:	19007
Terminal & Terminal Block Type:	Push-On Terminal
Wire Gauge:	10 AWG

Category Top Products

1757035

Phoenix Contact

Phoenix Contact 1757035 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 12A current and 320V voltage. It accepts wire gauge up to 12 AWG with wire cross section of 2.5 mm2, mounted on board using screws. Safety approved by CB, CSA, CUL, EAC, UL, VDE for various industrial applications.

1703492

Phoenix Contact

BARRIER STRIP TERMINAL BLOCK;

42439.2

Ptr Hartmann

MODULAR TERMINAL BLOCK;

MS25036-108

TE Connectivity

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.08 mm2; Safety Approval: CSA; MIL; UL;

31249116

Metz Connect Usa

The Metz Connect Usa 31249116 is a Barrier Strip Terminal Block with 16 ways, rated for 12A current and 400V voltage. It uses a screw fastening method and accepts wire gauge up to 12 AWG (2.5 mm2). Ideal for CUL, SEV, UL safety approved applications requiring secure electrical connections.

2-320565-1

TE Connectivity

TE Connectivity 2-320565-1 is a UL-approved RING TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm², it is designed for FEMALE terminals in various applications.

327583

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Wire Cross Section: 2.62 mm2;

1888700

Phoenix Contact

The Phoenix Contact 1888700 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 16A current and 400V voltage. It supports wire gauge up to 14 AWG and wire cross section of 2.5 mm2, featuring SCREW fastening method. Ideal for BOARD mounting, it holds safety approvals from CUL, EAC, UL, VDE for various applications.

MS-25036-153

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2.08 mm2;

34138

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 10 AWG; Terminal Gender: FEMALE; Wire Cross Section: 6.64 mm2;

1547630000

Weidmueller & Kg

MODULAR TERMINAL BLOCK;

MS25036-153

Amphenol Communications Solutions

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 2.08 mm2;

1SNK710151R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 6 AWG; Wire Cross Section: 10 mm2; No. of Decks: 1; Safety Approval: UL;

35108

TE Connectivity

TE Connectivity 35108 is a UL-approved RING TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6.64 mm2, it's ideal for female terminals in various applications.

1066

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

160-1026-02-01-00

Cambion Electronics

TURRET TERMINAL; Terminal Gender: MALE;

1787056

Phoenix Contact

Phoenix Contact 1787056 is a Barrier Strip Terminal Block with 2 rows, 6 ways, and rated voltage of 160V. It has CB, CUL, EAC, UL, VDE safety approvals for applications requiring a current rating of 8A. Ideal for board and panel mounting using connector fastening method.

1725737

Phoenix Contact

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PA, UL 94V-0; Wire Gauge: 20 AWG; Voltage (Rated): 160 V;

63130-2

Tyco Electronics Amp

SPLICE TERMINAL; Terminal Gender: FEMALE;

2091-1104/002-000

Wago

Wago 2091-1104/002-000 is a BARRIER STRIP TERMINAL BLOCK for CABLE mounting. It supports 14 AWG wire gauge with 1.5 mm2 wire cross section and rated voltage of 320V, current of 10A. Ideal for applications requiring secure connections in electrical wiring systems.