Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
3,747	$2.414	$9,045.071

1552300064

Manufacturer

Molex
Manufacturer's Part Number

1552300064
Description

WIRE AND CABLE;
Datasheet

Datasheet

3747 In Stock

Popular Products

LL4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

2N2222A

Nte Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;

Details

SMBJ18CA

Taiwan Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Silicon Group

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Taitron Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

LM317T

Micro Commercial Components

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;

Details

1N4148WS

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

MBR0520LT3G

Onsemi

MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.

Details

NC7WZ17P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

1552300064 Technical Details

TYPE	DESCRIPTION
Connector Accessory Type:	WIRE AND CABLE

Category Top Products

34440010250

Belden

Wires and Cables;

2149201214

Molex

CABLE ASSEMBLY;

M22759/44-22-9

TE Connectivity

TE Connectivity's M22759/44-22-9 cable is MIL-approved with a 600V rating, featuring stranded construction and silver conductor finish. With ETFE insulator material, it operates b/w -65 to 200°C, making it ideal for flexible cord and fixture wire applications.

A-MCSP-80010/B

Assmann Wsw Components

A-MCSP-80010/B by Assmann Wsw Components is a 26 AWG stranded cable with PVC jacket, 5.2mm diameter, and 10mm length. It features RJ45 plugs on both ends, 0.13 mm2 cross-section area, and 8 conductors. Ideal for communication, control, and power-limited applications.

5855/7BK005

Alpha Wire

Alpha Wire's 5855/7BK005 is a MIL-approved stranded wire with silver finish, TFE insulator, and copper conductor. It operates b/w -60°C to 200°C, making it suitable for electronic, medical, and military applications. With a voltage rating of 600V and AWG of 22, it is ideal for various electrical projects.

M16878/6BDE-9

Weico Wire & Cable

WIRE AND CABLE; Rated Voltage: 250 V; Shielding: NO; Minimum Operating Temperature: -60 Cel; Length: 30.48 mm; Maximum Operating Temperature: 200 Cel;

P564-001

Tripp Lite

CABLE ASSEMBLY;

U.FL-2LP-088K1T-A-(150)

Hirose Electric

Hirose Electric U.FL-2LP-088K1T-A-(150) is a stranded FEP cable with silver finish, shielding, and 30 AWG. Ideal for communication applications, it has a diameter of 1.37mm, operates b/w -40 to 90°C, and features U.FL connectors on both ends.

PMHDMF-4

Infinite Electronics International

CABLE ASSEMBLY;

3365/16-300SF

3m Electronic Products Division

3m Electronic Products Division's 3365/16-300SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, it has a wire gauge of 28 AWG and length of 91.44mm. Ideal for electrical applications requiring flexibility and durability in confined spaces.

82A0111-26-9

TE Connectivity

TE Connectivity's 82A0111-26-9 is a SINGLE WALL cable with 600V rating, TIN finish, and COPPER ALLOY conductor. With -65 to 150 °C operating range, it's ideal for FLEXIBLE CORD AND FIXTURE WIRE applications requiring 26 AWG wire gauge and SPEC 80 cable types.

151661019

Molex

Molex 151661019 flat cable with UL approval, rated for 60V and 105°C. Features tin finish copper alloy conductor, polyester insulation, and 31 conductors in 0.01 mm2 cross section area. Ideal for electrical wiring applications requiring flexibility and durability in a wide temperature range.

24450

Helukabel

WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 20; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Insulator Material: POLYPROPYLENE;

13253

Helukabel

Helukabel 13253 is a stranded wire with polymer jacket, rated at 600V. With approvals from BS, CUL, DIN, IEC, UL, VDE, it's ideal for fixed installations. Featuring 5 bare copper conductors and a cross-section area of 1mm2, this flexible cord has an operating temperature range of -40 to 80°C.

55PC0211-20-9CS2502

TE Connectivity

TE Connectivity's 55PC0211-20-9CS2502 is a flexible cord with 600V rating, TIN finish, and copper alloy conductor. With -65 to 150 °C operating range, it suits electrical applications needing 20 AWG wire gauge and SPEC 55 cable type.

7928A0101000

Belden

Belden 7928A0101000 is a solid construction communication cable with FEP jacket and insulator. It has 8 bare copper conductors, rated for 300V, -70 to 150°C operating temperature range. Approved by CE, CEC, CUL, ISO/IEC, NEC, NEMA. Ideal for electrical wiring applications.

M17/176-00002

Harbour Industries

WIRE AND CABLE; Rated Voltage: 1000 V; Shielding: YES; IEC Conformity: NO; Conductor Material: ALUMINUM; MIL Conformity: YES;

U3A00057-05M

L-com

CABLE ASSEMBLY;

M27500-22SB2T23

TE Connectivity

TE Connectivity's M27500-22SB2T23 is a 600V electrical wire with a tin conductor finish and modified radiation cross-linked ETFE polymer insulation. It has a max operating temperature of 150°C and can withstand temperatures as low as -65°C. This flexible cord and fixture wire, approved by MIL-DTL-27500, is commonly used in applications requiring a 22 AWG wire size, such as aerospace and military industries.

32860

Helukabel

WIRE AND CABLE;