Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

CC174RP-15

Manufacturer

L-com
Manufacturer's Part Number

CC174RP-15
Description

CABLE ASSEMBLY;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WS

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

C1206C104K5RACTU

KEMET Corporation

KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.

Details

SMBJ18CA

International Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

NDT2955

Onsemi

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

1N4148WS

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

2N2222A

Crimson Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

RN41N-I/RM

Microchip Technology

Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.

Details

1N4148WT

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBF170LT1G

Rochester Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;

Details

BAV99

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Nexperia

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Micronas Semiconductor Holding Ag

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;

Details

CC174RP-15 Technical Details

TYPE	DESCRIPTION
Connector Accessory Type:	CABLE ASSEMBLY

Category Top Products

5854/7BK005

Alpha Wire

Alpha Wire's 5854/7BK005 is a MIL and UL approved stranded wire with silver finish, TFE insulator, and copper conductor. Ideal for electronic, medical, and military applications with a temperature range of -60 to 200°C. Features 24 AWG gauge, 1.12mm diameter, and flexible cord type for versatile use.

USB-RS485-WE-5000-BT

FTDI

FTDI USB-RS485-WE-5000-BT cable has 6 conductors, rated voltage of 5V, and a max operating temp of 85°C. Ideal for input/output applications, it is a communication cable with USB connector and TIN finish, suitable for various electrical setups.

M17/176-00002

Tri-star Electronics International

WIRE AND CABLE; Shielding: YES; MIL Conformity: YES; DIN Conformity: NO; No. of Conductors: 1; Insulator Material: PTFE;

1437361-3

TE Connectivity

TE Connectivity 1437361-3 is a stranded flat ribbon cable with 10 conductors. It has a rated voltage of 300V and can operate in temperatures ranging from -20°C to 105°C. This cable is commonly used in electrical applications requiring flexibility and high conductivity.

PX0843/B

Bulgin

Bulgin's PX0843/B cable assembly features UL approval, PVC jacket and shielding, suitable for USB B Type to connector connection. Rated for 30V voltage, 1A current with operating temperatures from 0°C to 70°C. Ideal for electrical connections in various applications.

TTL-232R-5V-WE

FTDI

FTDI's TTL-232R-5V-WE is a 6-conductor communication cable with CE and UL approvals. It operates b/w -40°C to 85°C, suitable for instrumentation and control applications. Featuring 24 AWG wire gauge and 5mm diameter, it ensures reliable connectivity in various electrical setups.

34137

Helukabel

WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Wire Gauge (AWG): 18; Construction: STRANDED; Insulator Material: POLYETHYLENE;

U3A00057-2M

L-com

CABLE ASSEMBLY;

M22759/11-22-2

Belden

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; Application: FOR INTERNAL WIRING OF ELECTRONIC AND ELECTRICAL EQUIPMENT; Wire Gauge (AWG): 22;

151660984

Molex

Molex 151660984 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a temperature range of -40 to 105 °C, it has 27 conductors with AWG 37 gauge and resistance of 2.2 ohm.

16020103

Lapp Group Pvt

16020103 by Lapp Group Pvt is a flexible cord with 3 conductors, rated at 300V. Featuring stranded construction and polymer jacket material, it has a cross-section area of 2.5mm² and wire gauge of AWG13. Ideal for use in dry, damp, or wet interiors, this cable is approved by CE, EAC, and VDE standards.

687980002

Molex

Molex 687980002 is a PVC jacketed cable assembly with shielding, rated for 30V and 3A. It features USB 2.0 C MALE connectors on both sides and has 22 conductors. This cable is commonly used in electrical applications requiring reliable data transfer.

1554211004

Molex

WIRE AND CABLE;

M27500-20SD2T23

TE Connectivity

TE Connectivity's M27500-20SD2T23 is a 600V rated cable with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring a copper alloy conductor and 20 AWG wire gauge, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cords and fixture wires.

M22759/11-22-0

Belden

Belden's M22759/11-22-0 wire is MIL-W-22759 approved with 600V rating, suitable for internal wiring in electronics. Features silver-coated copper alloy conductor, PTFE insulation, and can operate up to 200°C. Stranded construction with 19X34 stranding and 0.326 mm2 cross-section area make it a flexible cord and fixture wire choice.

111005-1030

Molex

CABLE ASSEMBLY;

1856/19RD005

Alpha Wire

The Alpha Wire 1856/19RD005 is a stranded electrical wire with 600V rating, TIN conductor finish, and PVC insulation. Ideal for flexible cord and fixture wiring applications. Features include 20 AWG gauge, 1.52mm diameter, and operating temperatures from -55°C to 105°C.

55A0111-22-94

TE Connectivity

TE Connectivity's 55A0111-22-94 cable is a stranded wire with tin finish, rated at 600V. With a conductor made of copper alloy and a max operating temperature of 150°C, it is suitable for general purpose and lightweight applications. This flexible cord and fixture wire has a diameter of 1.09mm, stranding of 19X34, and is categorized under SPEC 55 cables.

115101-30-18.00

Amphenol

CABLE ASSEMBLY;

3365/14100

3m Electronic Products Division

WIRE AND CABLE;