Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
760	Request Pricing	-

151660989

Manufacturer

Molex
Manufacturer's Part Number

151660989
Description

WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Additional Features: FLAME RESISITANT;
Datasheet

Datasheet

760 In Stock

Popular Products

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

LM555CM

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM358N

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

2N7002

Vishay Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;

Details

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

FDC5614P

Onsemi

FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

151660989 Technical Details

TYPE	DESCRIPTION
Other Names:	15166-0989 151-66-0989 0151-66-0989 151660989
Wire Gauge (AWG):	37
Construction:	FLAT
IEC Conformity:	NO
Approvals (V):	UL
Shielding:	NO
Minimum Operating Temperature:	-40 Cel
Rated Voltage:	60 V
Cross Section Area:	.01 mm2
Conductor Finish:	TIN
Resistance:	2.2 ohm
MIL Conformity:	NO
Length:	.051 mm
Wire & Cable Name:	FLAT CABLE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	POLYESTER
No. of Conductors:	29
Additional Features:	FLAME RESISITANT
Conductor Material:	COPPER ALLOY
Maximum Operating Temperature:	105 Cel
Rated Current:	.35 A
DIN Conformity:	NO

Category Top Products

44A0111-20-3

TE Connectivity

TE Connectivity's 44A0111-20-3 is a stranded electrical wire with 600V rating, TIN finish, and copper alloy conductor. With -65 to 150°C operating range, it's ideal for flexible cord and fixture wire applications requiring 20 AWG diameter and SPEC 44 cable type.

3600B/26

3m Electronic Products Division

3600B/26 wire by 3m Electronic Products Division is a POWER-LIMITED cable with 26 conductors, shielded with PVC jacket. It has approvals from CUL and UL, rated for 150V voltage and operates at max temp of 75°C. Ideal for electrical applications requiring flexibility and durability.

83264

Belden

Belden 83264 is a flexible cord with 4 copper conductors, rated for 30V and operating temperatures from -40 to 90°C. Featuring M12 male and female connectors, it is ideal for electrical applications requiring DIN and IEC conformity.

12814

Helukabel

Helukabel 12814 is a CONTROL CABLE with 5 STRANDED BARE COPPER conductors, rated at 600V. It has CE, CSA, UL approvals and a POLYURETHANE jacket. Suitable for applications like conveyor belts and tooling machines, it operates b/w -40 to 80°C temperatures.

M16878/4BJE-9

Allied Wire & Cable

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -60 Cel; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Additional Features: CHEMICAL/FLAME/MOISTURE RESISTANT, STANDARD: MIL-W-16878/4;

115101-20-72.00

Amphenol

CABLE ASSEMBLY;

44A0111-24-9-MX

TE Connectivity

TE Connectivity's 44A0111-24-9-MX is a 600V rated wire with TIN finish, suitable for temperatures ranging from -65 to 150°C. Featuring 24 AWG copper alloy conductor with 19X36 stranding, it is ideal for applications requiring flexible cord and fixture wire such as SPEC 44 cables.

18357

Helukabel

The Helukabel 18357 is a CE, DIN, EAC approved cable with stranded construction and polyurethane jacket. It has a rated voltage of 300V and insulator made of thermoplastic elastomer. Ideal for robust applications in dry, damp, and wet rooms with operating temperatures ranging from -40 to 90°C.

92390101000

Belden

WIRE AND CABLE;

21382

Helukabel

Helukabel 21382 is a control cable with CE and UL approvals, made of polyurethane jacket material. It has a rated voltage of 600V, suitable for offshore applications. With a temperature range from -40 to 80°C, it features bare copper conductor material and a cross-section area of 120mm².

227003-01

Qualtek Electronics

CABLE ASSEMBLY;

TC2050-IDC-NL

Tag-connect

CABLE ASSEMBLY; Connector Side-1: IDC; Connector Side-2: TAG-CONNECT; Shielding: NO; Additional Features: PLUG-OF-NAILS;

U3A00057-3M

L-com

CABLE ASSEMBLY;

55PC0211-24-9

TE Connectivity

TE Connectivity's 55PC0211-24-9 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. With a conductor made of copper alloy and operating temperatures ranging from -65°C to 150°C, this 24 AWG wire is suitable for various electrical projects. Its stranding of 19X36 makes it durable and reliable for use in flexible cord and fixture wiring under demanding conditions.

3365/14100

3m Electronic Products Division

WIRE AND CABLE;

44A0111-20-6-US

TE Connectivity

WIRE AND CABLE;

C3365/10

3m Electronic Products Division

3m Electronic Products Division's C3365/10 is a 300V rated flat flexible cable with 10 conductors. Featuring tinned copper conductor material and PVC insulation, it has approvals from CUL and UL. Ideal for applications requiring a temperature range of -20 to 105°C.

3600B/26100

3m Electronic Products Division

WIRE AND CABLE;

M22759/16-22-5

Helistrand

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Material: COPPER; Insulator Material: EXTRUDED ETFE; Wire Gauge (AWG): 22;

M81044/12-22-9

TE Connectivity

TE Connectivity's M81044/12-22-9 is a 600V stranded wire with tin finish, suitable for general purpose applications. Featuring a conductor made of copper alloy, it has a temperature range from -65 to 150°C and a diameter of 1.19mm. This MIL-DTL-81044 cable type is flexible and lightweight, ideal for various electrical projects.