LAN8710AI-EZC-TR by Microchip Technology

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LAN8710AI-EZC-TR

Manufacturer

Microchip Technology
Manufacturer's Part Number

LAN8710AI-EZC-TR
Description

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

NDT2955

National Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

BAV99

Sprague Electric

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;

Details

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

NC7WZ17P6X

Onsemi

The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.

Details

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

Details

M39029/56351

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Crimson Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

PIC18F4550-I/PT

Microchip Technology

PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.

Details

LL4148

First Components International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

1N4148WT

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32F405RGT6

STMicroelectronics

STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.

Details

LAN8710AI-EZC-TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	1.2 V
Telecom IC Type:	ETHERNET TRANSCEIVER
Maximum Seated Height:	1 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
No. of Terminals:	32
Qualification:	Not Qualified
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Length:	5 mm
Technology:	CMOS
JESD-30 Code:	S-XQCC-N32
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	5 mm
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

TCAN1051HGDRBTQ1

Texas Instruments

TCAN1051HGDRBTQ1 by Texas Instruments is a network interface IC with AEC-Q100 screening. It operates b/w -55 to 125 °C, supports data rates up to 5 Mbps, and has a supply current of 180 mA. Ideal for automotive applications due to its MILITARY temperature grade and small outline package style.

MCP2562FD-E/P

Microchip Technology

MCP2562FD-E/P by Microchip: CAN FD transceiver with 8 Mbps data rate, 5V supply voltage, and -40 to 125°C operating temp. Ideal for automotive applications requiring TS16949 screening level. Package style is in-line with 8 terminals and matte tin finish.

KSZ9031MNXCA-TR

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;

DP83867CSRGZT

Texas Instruments

DP83867CSRGZT by Texas Instruments is an Ethernet transceiver with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates b/w 0-70°C, in a square chip carrier package style with 48 terminals. Ideal for network interfaces, it features nickel palladium gold terminal finish and very thin profile design.

KSZ8995M

Micrel

LAN SWITCHING CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;

BCM5241A1IMLGT

Broadcom

BCM5241A1IMLGT by Broadcom is an Ethernet transceiver with a 2.5V supply voltage and silver terminal finish. It has a peak reflow temperature of 260°C and MSL level of 3, making it suitable for network interfaces in various applications.

ISOW1044BDFMR

Texas Instruments

ISOW1044BDFMR by Texas Instruments is a CAN FD transceiver with 5 Mbps data rate, operating b/w -40 to 125°C. It features a small outline package with 20 terminals and requires 211 mA supply current at 5V. Ideal for network interfaces in various applications requiring high-speed communication in harsh environments.

TCAN1051HVDRBRQ1

Texas Instruments

TCAN1051HVDRBRQ1 by Texas Instruments is a network interface IC with AEC-Q100 screening. It operates b/w -55 to 125°C, has 8 terminals, and supports a data rate of 2 Mbps. Ideal for automotive applications requiring a reliable interface circuit in harsh environments.

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

TJA1044GT/3Z

NXP Semiconductors

NXP Semiconductors' TJA1044GT/3Z is a CAN transceiver with 5 Mbps data rate, 8 terminals, and AEC-Q100 screening. It operates at -40 to 150°C, suitable for automotive applications due to its small outline package and high reliability.

LAN8710A-EZK-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

SN65HVD235DG4

Texas Instruments

SN65HVD235DG4 by Texas Instruments is an automotive-grade interface circuit with 1Mbps data rate, operating b/w -40 to 125°C. It has a supply voltage of 3.3V and low current consumption of 6mA, suitable for network interfaces in harsh environments like automotive applications.

KSZ8081MLXCA

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;

DP83849IDVSX/NOPB

Texas Instruments

DP83849IDVSX/NOPB by Texas Instruments is an Ethernet transceiver with 4 transceivers, operating at 100000 Mbps. It has a supply voltage of 3.3V and temperature range from -40 to 85°C, suitable for industrial applications. The package style is flatpack with thin profile and fine pitch, making it ideal for network interfaces in compact designs.

TJA1042T/3/CM,118

NXP Semiconductors

NXP Semiconductors' TJA1042T/3/CM,118 is a network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in automotive applications. The small outline package with matte tin finish and gull wing terminals makes it ideal for surface mount designs.

AR8031-AL1A-R

Qualcomm Atheros

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

MAX33041EASA+

Maxim Integrated

CAN TRANSCEIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;

TJA1021TK/10/C,118

NXP Semiconductors

NXP Semiconductors' TJA1021TK/10/C,118 is a LIN transceiver with 12V supply voltage. It operates b/w -40 to 150°C, suitable for automotive applications. The small outline package has 8 terminals and is AEC-Q100 qualified for robust performance in harsh environments.

88E1111-B2-BAB1I000

Marvell Technology

Marvell's 88E1111-B2-BAB1I000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at 1V, measures 10mm wide by 14mm long, and has a terminal pitch of 1mm. Ideal for network interfaces requiring compact design and surface mount capability.

PCA82C250T/N4,112

NXP Semiconductors

PCA82C250T/N4,112 by NXP Semiconductors is a Network Interface IC with 1 transceiver. It operates at -40 to 125°C, suitable for automotive applications. With a supply voltage of 5V and Gull Wing terminal form, it offers reliable communication in compact design.