Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

KSZ8721BL-TR

Manufacturer

Micrel
Manufacturer's Part Number

KSZ8721BL-TR
Description

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

SMBJ18CA

International Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

SMBJ18CA

Alpha & Omega Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

LM317AEMP/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;

Details

1N4148

Taitron Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM2931Z-5.0G

Onsemi

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

Details

1N4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

International Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

SMBJ18CA

Taiwan Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

KSZ8721BL-TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	2.5 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	1.6 mm
Surface Mount:	YES
Terminal Finish:	Matte Tin (Sn)
No. of Terminals:	48
Terminal Position:	QUAD
Package Style (Meter):	FLATPACK, LOW PROFILE, FINE PITCH
Technology:	CMOS
JESD-30 Code:	S-PQFP-G48
Package Shape:	SQUARE
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	LFQFP
Width:	7 mm
Moisture Sensitivity Level (MSL):	3
Telecom IC Type:	ETHERNET TRANSCEIVER
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Length:	7 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	COMMERCIAL

Category Top Products

KSZ9031RNXVA

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

14235R-2000

Dialog Semiconductor

14235R-2000 by Dialog Semiconductor is an Ethernet transceiver with a data rate of 78 Mbps. It operates at temperatures ranging from -40 to 85 °C and has a supply voltage of 3.3 V. This network interface IC comes in a square package style, suitable for industrial applications requiring low power consumption.

LAN8742AI-CZ-TR

Microchip Technology

LAN8742AI-CZ-TR by Microchip Technology is an Ethernet transceiver with a data rate of 100 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a small package size (4mm x 4mm). It is suitable for network interfaces in various applications.

88E1512-A0-NNP2C000

Marvell Technology

Marvell's 88E1512-A0-NNP2C000 is a square-shaped chip carrier with 56 terminals, designed for Ethernet transceiver applications. Operating at 3.3V, it supports data rates up to 1000 Mbps. This surface-mount device is ideal for network interfaces requiring high-speed connectivity in various electronic systems.

88E1111-B2-BAB1I000

Marvell Technology

Marvell's 88E1111-B2-BAB1I000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at 1V, measures 10mm wide by 14mm long, and has a terminal pitch of 1mm. Ideal for network interfaces requiring compact design and surface mount capability.

TCAN1051HGVDR

Texas Instruments

TCAN1051HGVDR by Texas Instruments is a Network Interface IC with 8 terminals, operating temperature range of -55 to 125°C. It features a data rate of 5 Mbps, suitable for military-grade applications requiring a nominal voltage of 5V and max supply current of 180mA.

KSZ8041FTLI

Microchip Technology

KSZ8041FTLI by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at -40 to 85°C. Features 48 terminals in a thin profile flatpack package. Ideal for industrial applications requiring reliable network interfaces.

KSZ9131RNXV-TRVAO

Microchip Technology

Microchip Technology's KSZ9131RNXV-TRVAO is an Ethernet transceiver with a data rate of 1000 Mbps. It operates in industrial temperature range (-40 to 105°C) and has AEC-Q100 screening level for automotive applications. The package style is chip carrier with 48 terminals, suitable for surface mount assembly.

LAN8710AI-EZK-TR

Microchip Technology

LAN8710AI-EZK-TR by Microchip is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3V power supply, matte tin finish, and square package shape suitable for industrial applications requiring network interfaces.

TJA1055T/C,512

NXP Semiconductors

NXP Semiconductors' TJA1055T/C,512 is a Network Interface IC with 14 terminals in a small outline package. It operates at 5V nominal voltage and has a peak reflow temperature of 260°C. Ideal for telecom applications due to its interface circuit design and compact dimensions.

LAN8740A-EN-TR

Microchip Technology

LAN8740A-EN-TR by Microchip Tech is an Ethernet transceiver with 100 Mbps data rate. It operates at 0-70°C, has 32 terminals in a square chip carrier package style, and uses matte tin terminal finish. Ideal for network interfaces in commercial applications due to its TS16949 screening level and low profile design.

KSZ8081RNBIA-TR

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

KSZ9031RNXCA

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

KSZ8851SNLI

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

DP83822IFRHBT

Texas Instruments

Texas Instruments DP83822IFRHBT is a Network Interface with 4 transceivers for Ethernet. It operates at data rate of 100000 Mbps, with supply voltage of 1.8V. Suitable for industrial applications, it has temperature range from -40 to 85°C and MSL level of 2.

SN65HVD256DR

Texas Instruments

SN65HVD256DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps and operates at a nominal voltage of 5V. This automotive-grade IC has a temperature range from -40 to 125°C, making it suitable for network interfaces in harsh environments. With a compact rectangular package style and gull wing terminal form, it is ideal for surface mount applications.

KSZ8895RQXIA

Microchip Technology

KSZ8895RQXIA by Microchip: 128 terminals, 5 transceivers, 100 Mbps data rate. Ideal for Ethernet switch applications in industrial settings. Operates b/w -40 to 85°C with a compact rectangular package design.

NCN5121MNTWG

Onsemi

The Onsemi NCN5121MNTWG is a Network Interface IC with 40 terminals in a square chip carrier package. It operates b/w -40 to 105°C, suitable for industrial applications. With a nominal voltage of 3.3V and terminal pitch of 0.5mm, it is ideal for telecom interface circuits.

KSZ8863RLL

Micrel

LAN SWITCHING CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;

TJA1051T/3

NXP Semiconductors

NXP Semiconductors' TJA1051T/3 is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at 5V nominal voltage, drawing a max of 110mA current. The small outline package measures 4.9mm x 3.9mm x 1.75mm and features gull wing terminals for surface mounting.