Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SP335EER1-L

Manufacturer

Maxlinear
Manufacturer's Part Number

SP335EER1-L
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

Details

BAV99

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

M39029/58-360

Conesys

CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

SMBJ18CA

Db Lectro

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32F407VGT6

STMicroelectronics

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

Details

LM2931Z-5.0G

Onsemi

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

Details

RC0805FR-0710RL

Yageo

Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

SMBJ18CA

Littelfuse

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SP335EER1-L Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1 mm
Surface Mount:	YES
Terminal Finish:	Matte Tin (Sn)
No. of Terminals:	32
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
JESD-30 Code:	S-XQCC-N32
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Interface Standard:	EIA-232; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	5 mm
Moisture Sensitivity Level (MSL):	2
Other Names:	1016-1969
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Maximum Transmit Delay:	1000 ns
Receiver No. of Bits:	2
Length:	5 mm
Maximum Receive Delay:	150 ns
Additional Features:	IT ALSO SUPPORTS 1 DRIVER, 1 RECEIVER WITH INTERFACE STANDARD RS-485/422
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

SN65LVDT2DBV

Texas Instruments

SN65LVDT2DBV by Texas Instruments is a line driver & receiver with a max supply voltage of 3.6V and max transmit delay of 3.1ns. It is used in industrial applications requiring differential Schmitt trigger input characteristics and EIA-644-A/TIA-644-A interface standard.

L6360TR

STMicroelectronics

L6360TR by STMicroelectronics is a Line Transceiver IC with 26 terminals and a supply voltage range of 18-30V. It operates in automotive-grade temperatures (-40 to 125°C) and has a max output low current of 2A. This surface-mount chip carrier is ideal for differential Schmitt trigger applications requiring high reliability and performance.

ADM2582EBRWZ-REEL7

Analog Devices

ADM2582EBRWZ-REEL7 by Analog Devices is a Line Driver & Receiver with 3.3/5 V power supplies, 700 ns max transmit delay, and EIA-485-A interface standard. Ideal for industrial applications requiring differential output and operating temperatures from -40 to 85 °C.

ISL3280EIHZ-T7A

Renesas Electronics

LINE RECEIVER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed;

ICL3221EIAZ-T7A

Renesas Electronics

LINE TRANSCEIVER; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;

MAX232ACSE+T

Analog Devices

MAX232ACSE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and output polarity is inverted. Widely used in EIA-232-E, TIA-232-E, V.28, V.24 interfaces for communication applications.

AM26LS31CN

Rochester Electronics

LINE DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

SP3485CN-L/TR

Maxlinear

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ADM2483BRWZ-REEL

Analog Devices

ADM2483BRWZ-REEL by Analog Devices is a Line Driver & Receiver with 16 terminals, operating voltage range of 2.7V to 5.5V, and max transmit delay of 620ns. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482E interface standards in harsh environments due to its wide temperature range from -40°C to 85°C.

ICL3221EIAZ-T

Integrated Device Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;

ADM3101EACPZ

Analog Devices

ADM3101EACPZ by Analog Devices is a CMOS line transceiver with 12 terminals, operating at 3.3V. It supports EIA-232, TIA-232, V.28 interfaces and has a max output low current of 1.6A. Ideal for industrial applications requiring differential input characteristics and a supply voltage range of 3-5.5V.

ADM2484EBRWZ

Analog Devices

ADM2484EBRWZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It supports EIA-485-A, TIA-485-A, EIA-422, and ISO 8482E interfaces with a max supply voltage of 5.5V. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics.

ISO3086DWG4

Texas Instruments

ISO3086DWG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 45ns, differential outputs, and interface standards EIA-422/485. Ideal for industrial applications requiring high-speed data transmission in compact designs.

ADM3485EARZ

Analog Devices

ADM3485EARZ by Analog Devices is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has a max supply current of 1.5mA, and offers differential output. Ideal for industrial applications requiring reliable communication over long distances with low power consumption.

MAX3485CSA-T

Maxim Integrated

MAX3485CSA-T by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for applications requiring fast data transmission in commercial temperature environments.

SN65HVD1782DRG4

Texas Instruments

SN65HVD1782DRG4 by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at -40 to 105 °C. It has a max supply voltage of 5.5 V and differential output polarity. Ideal for industrial applications requiring EIA-485-A interface standard compliance.

DS34LV86TMX/NOPB

Texas Instruments

DS34LV86TMX/NOPB by Texas Instruments is a 16-terminal line driver with 3.6V supply voltage, operating b/w -40 to 85°C. It features EIA-422-B interface standard, differential output, and 4-bit receiver for industrial applications requiring high-speed data transmission.

LTC2855HDE#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR;

LTC2870IUFD#TRPBF

Analog Devices

LTC2870IUFD#TRPBF by Analog Devices is a Line Driver & Receiver with 2 functions, operating at -40 to 85°C. It features a max supply voltage of 5.5V, transmit delay of 70ns, and differential output for EIA-232/422/485 interfaces. Ideal for industrial applications requiring reliable communication over short distances.

MAX232ECWE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;